Dr.Fixit Kwik N Ezee Ready to Use Wall Gap & Crack Filler, 150gm (White), Pack of 2, DIY Waterproofing for Home Repairs, Tile Grout & Sealant for Tiles, Concrete, Metal, PVC, Wood

A good product but very difficult and messy to apply. Costly also.

This product is excellent DIY for sealing and gap filling purpose . Tested and tried for kitchen platform joint gaps , tiles joint gaps , gaps between toilet seat and floor , window sill and wall etc . You need to apply it on clean , dust free , water or moisture free surface hence prepration at the gap before application is critical for best results . You need to open front nozzle end which is mounted using threads , cut the bag , put the front nozzle end back and test apply on a surface to begins with and get the understanding of application bead thickness . For best results , you can buy wall putty application badle from hardware shop costing 8 to 10 rs ( don't use hand and fingers ) . This helps maintaing flatness , removing excess application and cleaning . Use dry cloth as a wipe to clean undesired area further . Use oil and soap to clean the sealant on fingeres and palm , if any . It needs 4 to 5 hours to dry and finish is rubbery .

Subject: Packaging Defect – Sealant Spillage Due to Improper Sealing at Cap We are experiencing a serious issue with the current packaging of the sealant tubes: Improper Sealing at Cap: The connection between the tube and the cap is not properly sealed. Instead of being securely fitted or factory-sealed, gum tape has been used at the joint between the tube and the cap. As a result, when pressure is applied to dispense the sealant, the material spills out from the sides of the cap instead of through the nozzle. Cap Functionality Issue: The cap also tends to get jammed or blocked, worsening the problem. This causes the user to apply more pressure, which further forces the sealant to leak out from the taped joint. Consequences: Sealant spills from the cap area, not the nozzle Heavy product wastage and mess Difficult and inconsistent application Increased time for cleanup and risk of contamination Required Action: We request immediate corrective action. The seal between the tube and the cap must be professionally and securely sealed—not with gum tape—to withstand normal dispensing pressure. The cap and nozzle design also need to be reviewed for proper functionality and ease of use.

Verdict: don't buy it for stopping leakage. Ordered this to fill the gap between wall-mounted toilet seat and the wall. Applied on dry area. Left to dry for 6 hours. Result: not satisfactory. The water leakage has not stopped. It doesn't look messy. The dried look resembles that of silicon filled in gaps of UPVC windows. But it is of no use if it can't stop leaking water. Problem with packaging: The white color paste comes in a tube. You got to press (like your toothpaste) and squeeze it out. The nozzle of tube detached and pulled out while using it. I had to apply the paste with hands and it took hours to remove it from my skin later.

Great useless. Perfectly serves the purpose. Just be sure to completely dry the part before application of paste, or else it comes off. I applied it at gaps of window frame and kitchen basin edges 1.5 years back, but still not single drop leakage even in heavy rains. Best product. Just the quantity is bit less , so feel a bit expensive. Otherwise it's very good

Works wonderfully well in wet conditions too, if properly cured by following the instructions on the container.

Value for money. Used in bathroom.

Need to finish in single use. Otherwise it will get hard . The quantity is small so most likely u can finish in single use. but need some technique to use ( with gloves on) also it will be difficult to apply on write spot neatly. And without gloves (not safe /not recommended ) you will need to wash your hand very thoroughly after use