Carina D1 Magnetic Charging Dock Compatible with Meta Quest 3

I've been using this charging dock for over a month and use my Q3 daily. I should note that I use AMVR grips and facial interface along with the BoboVR S3 Pro strap. Since I'm using aftermarket grips I'm unable to charge the grips in the dock. That said, I appreciate the inclusion of the rechargeable batteries - I charge them with a standard NiMH Eneloop charger I have and the included batteries charge and perform perfectly. Although I love Kiwi products, I find the PrismXR dock's form-factor superior and the fact it accommodates the BoboVR strap a significant plus. Setting the headset in the dock is fairly trivial but I always make sure it is seated properly for charging. One big plus this dock has over some of the competition is that it comes with a charging brick. I use the charging brick to power the dock and I use a separate 45w charger for the BoboVR's removable battery. If you own an S3 Pro strap, you're most likely comparing this with BoboVR's dock designed exclusively for the S3 Pro and their own grips. I haven't tried that dock (it was not available when I purchased this) but I note the Bobo dock is both more expensive and does not come with a charging brick (for the base model). Bobo makes good stuff so I assume it is decent but definitely not a great value. All said, I'm very pleased with the PrismXR dock. You've surely already seen it comes with a tiny adapter for the charging pins - you might need to use this depending on your strap. I'm using it and it works fine - I'm not inconvenienced or concerned about that at all. Ultimately this is a very well thought-out charging dock perfectly designed to accommodate a variety of Q3 straps. The price is significantly less than the Meta or Bobo docks and it works fine. The inclusion of rechargeable batteries is a big plus even if you prefer to use other grips (just make sure you have a proper battery charger). If you use the included grip covers you'll be able to charge the grips in the dock without needing to remove the batteries. I highly recommend this dock for most people--it is great.

I’ve had this for just over 2 months now and I honestly love it. It makes things so much easier when I’m done playing. I just set the headset down in the cradle and it starts charging automatically, and same with the controllers. You just drop them in the little holes and they charge too, no messing around with cables or trying to line things up. Once they’re full it stops charging on its own so I don’t even have to think about it. It’s also super neat looking, everything fits in a small circle instead of those big long charging docks where everything’s spread out. Way better for keeping stuff organized. The only issue I had was after about 7 weeks the rechargeable controller batteries started acting weird, but honestly that’s probably cause 4 people use this headset a lot in my house. I contacted the company through their Discord (you can also email them on Amazon) and they replied at like 1:30 in the morning saying they were already sending replacements out. No questions, no charge, nothing. Easiest customer service I’ve ever dealt with. I’ve bought a few different charging docks before this one and ended up returning all of them. This one’s the only one that worked exactly how I wanted. I’m not getting anything for saying this, I just wanted to help anyone else looking for the right setup. If you’re thinking about it, get this one. You’ll be glad you did.

This dock is awesome! I bought it for the smaller footprint and the drop in charging capability. The dock is very well made and the magnetic connections are very strong. It's so quick and simple to put the quest on this charger that my kids actually charge the quest! 😅 My first dock had some issues maintaining a connection and would continue beeping and flashing. Sometimes it would stop and connect, other times it would just randomly start beeping because it would lose its connection. At first I thought maybe it was me and maybe I wasn't lining it up correctly somehow. I reached out to customer service and learned that they had a batch of units that had this issue. They sent me a replacement right away, along with a free gift for dealing with the trouble of the first unit. The new unit has had no issues whatsoever and has lived up to all its promises. It connects instantly once you drop the quest in without any finickiness. This accessory is one of my favorites and you will not regret purchasing it!

This is, without a doubt, the absolute worst product of any type I have ever purchased in my entire life. The problem is all of the contacts are spotty, both on the controllers and the headset. There is a very loud BEEP that occurs when a device starts charging, and since the connections are spotty it beeps very loudly CONSTANTLY and never really charges anything. I can't count the number of times this piece of junk has woken me up at night. The magnetic spring charger for the HMD rarely aligns with the charging pins, so it can take a minute or more of messing around with the headset alignment on the dock before it actually starts to charge, and I'll often come back to the headset not charging at all and completely depleted. Additionally, sometimes the charging pins don't come up to meet the headset either because the spring is too tight or the pin housing on the dock gets stuck and I have to pry it out with a knife before trying fruitlessly to align the HMD on the dock. After only a few months the magnetic sticker on the HMD that engages the spring loaded charging pins on the dock no longer sticks. It falls off constantly. I contacted the company for a replacement and haven't heard back yet. It's honestly the most annoying and frustrating product I've ever purchased, but if it worked as intended it would be great. I cannot recommend this product. At all. Please avoid it. It's seriously one of the worst things I've ever purchased. Edit: I purchased the replacement magnet for $9.99. It comes with the alignment tool for application and two replacement magnets. I cleaned the application area with 99% IPA and allowed it to fully dry before applying the sticker with great force for at least 30 seconds. The first one fell off after a few hours. So did the second one. So the adhesive just isn't sufficient. When it was working, before both stickers fell off, both controller chargers were disconnecting constantly, which wasn't happening in the months of downtime when I didn't have a sticker applied to the HMD. This tells me that the included charging cable isn't even sufficient to charge all 3 devices at the same time. I'm gobsmacked at just how awful this product is. I'd give it negative 5 stars if I could. It is literally the worst thing I have ever purchased in my life. I've now wasted like $80 on this piece of junk and it's finally in its rightful home, in my trash can, and I could not be happier to finally be rid of it.

The PRISMXR Carina D1 fast charging dock does a lot of things right, and overall it’s a solid charging solution for the Meta Quest 3. This review is specifically for the version where the controllers don’t always sit correctly in the dock, which is an important distinction. Because of that issue, this lands at four stars instead of five. Starting with the positives, the charging performance itself is excellent. The headset charges quickly and reliably, and having a dedicated dock instead of cables scattered around makes a big difference in everyday use. Dropping the headset onto the dock at the end of a session feels clean and convenient, and it keeps everything organized and ready to go. The no-beeping design is a big plus as well. There are no annoying sounds when placing the headset or controllers on the dock, which is especially nice if your setup is in a bedroom or shared space. Build quality is good and feels premium enough for a Quest 3 accessory. The dock has a clean, modern look that fits well with the Quest’s design, and it doesn’t feel cheap or flimsy. It looks good sitting out on a desk or shelf and feels like a proper charging station rather than an afterthought. The headset connection is stable, and once placed correctly, charging starts as expected. Where this dock falls short is the controller seating. The controllers don’t always sit perfectly in their charging positions, which means you have to pay closer attention when placing them down. Sometimes they feel slightly misaligned, and you may need to adjust or reseat them to make sure they’re actually charging. This isn’t constant, but it happens often enough to be noticeable and a little frustrating. A charging dock should feel effortless, and the controller fit prevents it from being truly drop-and-go. Once the controllers are seated correctly, they do charge fine, but the lack of a consistently secure fit takes away from the otherwise polished experience. With better alignment or a more forgiving cradle design, this would easily be a five-star product. Overall, this is still a very good charging dock. It’s fast, quiet, looks great, and works well for the headset itself. If you’re okay with taking an extra second to make sure the controllers are seated properly, it’s a solid choice. With improved controller fit, this would be excellent. As it stands, four stars feels fair.

This charging dock is compact and works great with the Quest 3. Though you have to add a small adapter on the bottom of your magnetic charge pins on the Q3 for it to work with the dock, but it's pretty much drop and charge. Since I bought it, I've had two separate issues with one of the controller's battery not charging correctly, and one of the controller's grips covers broke. Both times the company was quick to respond via email and ship out replacements free of charge. Will buy more accessories VR from them again, especially if they decide to make some for the upcoming Steam Deck :)

I tried a couple of different charging docks, and this PRISMXR Carina D1 was the most compact, convenient and easy to use. It has a nice clean stylish design that displays the Quest 3 like an art piece, and keeps everything securely in place and readily accessible. When I'm done using my Quest 3, I just put my controllers and goggles on the dock, and it all connects and charges automatically without needing to plug anything in. It utilizes the Quest 3 bottom charging contacts so it leaves the USB-C port available so I can keep my BOBOVR S1 Pro head strap and extra battery plugged in. PRISMXR also includes rechargeable batteries for the controllers that charge in the dock, what a bonus! The dock has a back lift that supports a scooped back head cradle, and the front dock has room for my AMVR FC4A face interface that has positioning knobs at the sides. PRISMXR even includes a fast power supply and USB-C cable so the dock charges pretty quickly. This dock is pretty adaptable and works great for my Quest 3 setup. When I had an issue, PRISMXR responded and resolved very quickly with excellent customer support. They really stand behind their product. Great quality product and company.

So... its compact, it charges your headset and it gives you rechargeable batteries in the controllers. It is probably the best charging dock of this type for the Quest 3 as the magnetic snap on for the charger is definitely a good idea. But... most ppl seem to be going with some sort of battery strap like one of the BoboVR straps or similar and don't really worry about the Quest 3 battery itself. So a charging dock becomes a little pointless when you're putting the headset down with a full or 90%+ charge on it every time and then dock the batteries separately. Mine also would not maintain a proper connection with my Quest 3 no matter what I did. The orange light on the headest would be on but the light on the dock would be alternating green/orange, random beeping and I don't really trust it with a $500 headset if its malfunctioning. The controller covers... not induction, magnetic. Doesn't really matter except you can't use grips and the covers themselves fit badly. They clip on, but they don't fit like OEM covers do. I also never got them to go above 60% according to the in screen percentages on the Quest 3 but that might just be a capacity difference vs a normal AA? Dunno. Its also so compact that putting the controllers in after you put the headset down is a pain especially if you have a halo headset. I like to put the headset down first so I'm not looking through the cameras when I'm putting all my stuff away. Tbth, just get a good set of grips and swap AA batteries whenever you need or buy eneloops with a wall charger if you have to have rechargeable. If you have a stock Quest 3 and aren't using any sort of battery strap, 1 - enjoy like 2 hours of playtime before having to recharge it and 2 - hope it connects ok then this is probably the best charging dock. For me, I'm returning it as its malfunctioning and the controller battery doors fit horribly and I'm grabbing a $25 AMVR stand and some $25 AMVR grips. Will hold my headset and halo strap nicely and I won't have to worry about any issues and I can use a good set of velcro strap grips with battery doors.

trae pilas y tapas nuevas para poder cargar los mandos

Tres bonne station de charge pour meta quest 3 J’ai achete les dragonnes de la même marque pour les manettes

Excepcional producto. Perfecto para mantener ordenadas las Meta. Trae todo lo necesario para funcionar y carga perfectamente. Se acabaron los problemas de carga en los mandos. Llegó super rápido con Prime. Recomendable 100%.

Me parecio de excelente calidad aunque me llego con unas manchas que se limpiaron fácilmente. Tenia cable y cargador asi como dos guias imantadas para coneccion con la base. Estoy muy conforme con el producto. Tengo solo una situación con las baterias de los controles que no parecen pasar del 80 y 60%. Sin embargo no eh notado alguna afectacion a la funcion.

Perfetta