GE WH22X35837 Washer Inverter Control Board (Replaces: WH22X29531; WH22X32059; WH22X32957; WH22X34657)

The media could not be loaded. This part worked perfectly to get my GE front loader working again. This is a discontinued GE part that was replaced by part number WH22X38837 (at twice the price). Figured I’d try this before spending double the price, and lo! It worked! The washing machine in the attached video was dead yesterday, and look at it go now!Buying this part and popping it in myself was much better than paying the repair guy $600 to do the job. Watched a YouTube video one time to see how to do it, and it was a fairly straightforward job.

I have a GE smart washer that was no longer spinning the drum for more than 4 seconds at a time with a very long delay in between the error codes on the machine. We're leaning towards the motor being the culprit, but after reading multiple forms online I decided to go with the inverter board and it worked out perfectly. The machine has been operating without any problems now for over 4 months with the new board in it and I'm sure it will keep going for hopefully another 5 years or more

I saved a lot of money by buying this and watching YouTube videos to fix my washer myself.

Worked great! Our GE Profile Sapphire is barely a year old and this board already burned out (although I think I didn't help when I washed my king size 40lb weighted blanket in there and the spin cycle went for 3 hours, and I ended up having to hang dry the blanket for 2 days instead).To the GE Engineers - Why? Why in the world did you put this board in a place I had to take the ENTIRE machine apart to get to?Anyway....board worked great. Before rebuilding the washer, I kicked it into test mode and ran test 16 and passed with flying colors. Thanks for saving me $1000+ on a new washer.

washer would only spin 3 time then end cycle .works great now

Fixed my issue with the GE washer stopping washing cycle within a minute or two of starting. It was easy from the bottom of the unit, took no more than 30 minutes max to replace.

I am someone who is highly critical of reviews, so when I write one, I only include the things that I would want to know. One thing I often question on Amazon in regard to replacement parts is whether or not the product is in fact OEM or not. I realize that the fakes have gotten good, but I do believe this to be OEM based on the packaging and the product that I received. That being said I also do not believe that the original part should have failed as soon as it did. I did my own troubleshooting with the help of YouTube and this was in fact my problem. Machine is now working as it should. In fairness, it has only been a few days so I cannot comment about longevity. If you are going to replace this yourself there are a few things that you should know in advance. Access is not the easiest. The part is encased in a plastic housing that is essentially hinged. Two of the four wire housings are challenging to remove without inserting something like a small flat screwdriver to apply pressure to the clip. Exacerbated by the fact that you are working in the confined space under the drum. Most difficult was replacing the spring-loaded retention wire that holds the door gasket. I do believe there is a tool to aid in this. Can be done without one but is not easy. Lastly, this part can be accessed from the underside of the machine. I did not attempt this but read a review from someone who did. I could tell during the process that it would be possible to replace this way but cannot confirm if it is in fact easier. I am overall happy and optimistic that it will last a reasonable amount of time.

Didn't really like how expensive it was, and replacing it was a little bit of a nightmare, but.. it did fix the problem, and hasn't failed again since (knock on wood).