– ID-COOLING SE-214-XT BLACK CPU Air Cooler, Full Memory Clearance,180W | 4 Heat Pipes, 120mm Case Fan, Support LGA1851/1700/1200/115X & AM5/AM4, Easy Installation

only had 1 cable to install so it is very easy, the mounts were super simple to understand and id cooling has a video on youtube on how to install to make it even more simple. Keeps my i5 12400f at a comfortable tempture and all for a very good price. 10/10 would buy again.

Amazing, bit tricky with the installation but keeps my pc from sounding like a jet engine

I got this to use with an i5 14400F instead of the stock heatsink, it does the job nicely. Easy to fit once you see how (youtube vids better then the tiny writing on the pamphlet). Keeps temps low and isn’t that loud. Looks quite stealthy in the case. As the fan mounts onto the side of the heatsink, it does foul against the first memory bank on a Gigabyte DDR5 B760M board, so consider that if you want to use all slots.

Nice quality and easy to install on AMD platform. Instructions slightly difficult to follow - I ended up using the grey intel spacers instead of the red AMD ones but seems to be working OK. I didn't use the included thermal paste (prefer arctic mx) so can't comment on that but the cooling performance has been excellent and the included fan is nice and quiet. Cooler comes with additional clips to add a second fan which is good and fit easily on my itx motherboard.

It comes with a packet of thermal paste, very easy to install although I messed it up at first because I mounted the brackets upside down, looks great especially after I put the Ryzen sticker on, great airflow it flows straight through out the rear fan. And the quality for the price is mental.

Very good cooler. Keeps my computer at 20° on desktop with my 75700g. Would recomend

My AIO developed air bubbles + the pump was very loud. + Runs 10-5 degrees cooler than my NZXT AIO. The fan is very quiet and can be controlled through bios or 3rd party apps. Amazing product for the price and compatible with my lga1151 motherboard.

Heatsink arrived with plates bent, right out the box. Product images lie, this fan blocks my ram slots. It's not 100% compatible. Design of bracket is so poor I had use tape, then rest bracket (on underside of motherboard) with another object just to screw on the cooler. Instructions are mystifying, far from clear. Also doesn't explain how to attach fan to heatsink! Once fan is attached I found the clips to be flimsy and cause the fan to fall. I will never by ID AGAIN. Sorry I wasted my thermal paste.

Pretty much what the summary says, I'm running a Ryzen 5 5600 in a stock ATX chassis and it keeps my processor nice and cool without a lot of fuss or noise. Installation was pretty easy, I just wish the heatsink attached to the rail standoffs a bit easier, I had a hard time with alignment between the heatsink itself and the provided standoff rails. And I say that as someone who's taken hundreds of computers apart in their day. But once it was on, the fan attached with the included clips pretty easily, just be aware of cable routing. As for size, it's big. it goes all the way from the motherboard to right to the chassis edge in terms of height. I thought for sure it wasn't going to fit my case but it just barely stays below the edge. Through all that though it keeps my processor nice and cool no matter what I'm doing. No thermal issues, no high fan speeds to report. I've been using my system normally to heavy for about 2 weeks now after installation and everything is as it should be. For an inexpensive heatsink it does the job perfectly.

Easy assembling. No RGB ( that was actually my goal ,as i need PC not Christmas tree 😂) Works fine , temperature is nice and stable so it's doing it's job. Hopefully not needed soon, but in case of need gladly buying again.

The model that I bought was not quite enough performance for my needs but that is on me for the decision. I should have picked up a more robust model for my Ryzen 7700X. That siad, I was impressed with the build quality, ease of install, and performance. Well exceeding my expectations for the price point. It's a lot like a n updated hyper evo 212.

Product arrived with a fat dent in it, which wasnt too pleasing. Other than that, the product looks nice, and probably works fine, too.

Era lo que esperaba, un gran artículo cuya valoración ya conocía a través de otras páginas, iba a lo seguro. El funcionamiento, después de un fácil montaje, perfecto. La gestión por parte de Amazon en sintonía,, bien y según lo previsto; dentro de los plazos de entrega informados. Todo recomendable 100%