Perlick Faucet - Flow Control - Model 650SS

Well worth the price. They look good and function like champs. Easy to install and fit perfectly. No more gummed up tap. I went ahead and bought a second tap shortly after getting the first. Easy to remove from your keg tower and clean. Adjusting the flow is also a clutch feature.

I added two of these faucets to my kegerator. I also adjusted line length of the beer lines to 10 ft each and adjusted CO2 pressure to 10-13 psi. What a difference! The faucet adjustable flow rate was a game changer! The flow rate was superb! The fact that you can adjust the rate before the beer is poured into the pitcher is really nice! I'd definitely recommend that the faucet is worth the price!

Reliable foam control had been a frustrating issue with my Kegerator since it was delivered. I tried so many remedies. While this faucet seemed pretty pricey, I was ready to try anything. Bam! Problem solved. The flow control valve is a game changer. I sure wish I tried this sooner. Quality construction. Couldn't be happier.

Bought a new Jockey Box, had to add the Perlick Faucet with flow control. Adjust the flow and pour away!! Cheers

It's a Perlick, so the quality will always be there. What I love most is the innovative aspects of the design. I'm a new believer in flow control now, which gives me the on-the-fly control I need. Previously, I would have to adjust the CO2 valve, which is not always easy to reach, but now it's just so easy. Highly recommend!

If you're tired of pouring foam, or tasting a metallic flavor in your beer, get one of these. I have 11 on my taps, and although expensive (why I deleted a star) they work beautifully. You can adjust them down to a slow initial pour with minimal foam, then open them up after the tap has chilled and the beer is flowing. A lifetime investment, and the all stainless steel will eliminate the tap internals from giving your brew a metallic taste, which can happen with chromed faucets.

Delighted to report that this "flow control" beer faucet solved my ongoing problem with pouring beer from a keg - that problem being no matter what I'd do with the pressure, each pour was still mostly foam. Very, very frustrating. I guy at the local home brewing place suggested a "flow control" faucet; found this one with very good reviews, bought it, and viola! no more problem with too much foam! Expensive, but worth it.

Once you go flow control, you will never go back.This is an expensive tap. But it is also a perlick. Front sealing so no stuck andles and no gunky beer. The flow control is a great feature that is worth it in price over the standard perlick if you have multiple kegs and different pressures and don't want to have several lengths of beer tube to swap out to balance each serving pressure for each different beer. Also an alternative for those without the space to run feet and feet of like within their kegs. The flow control valve allows a very wide range of flow speed from substantially higher than a standard faucet to just a trickle, all without increasing foam like holding a faucet partway open does.I don't think the value is there for me to replace my single existing purlick faucet,. However as my keezer faucet count grows from the current of two, up to four, I will be spending the small premium for more of that can the standard perlick.