JCHENG IR Illuminator 4-Led Infrared Light for IR Camera, Quest Series and PSVR2 with Power Adapter

I use two to illuminate the front yard & a 3rd for the deck, works really well with my Axis camera systems, dawn dusk sensor is perfectly calibrated. The front ones are exposed to all weathers & have held up really well with no issues, although I did used adhesive lined heatshrink to seal the power cable joints just to ensure they remain watertight. All in all excellent value, the beam could be considered a little narrow but with only 4 emitters this is to be expected. If you need to cover a larger area consider a bigger unit, or multiples covering specific areas.

I am making my own CCTV system and the built in IR LED's with the camera were not quite bright enough and they put to much light on the soffit; which caused the camera problems. This photo is the output from the light only as the inbuilt LED's are covered over. I wanted a wide beam but could not find anything suitable and decided to go with this one. It is as described and for what I want it will be OK as it activates a flood light. I didn't want anything too bright as it could cause too much glare off the white car. You can see the beam shape and get some idea of the distance. I am still getting problems with reflection off the soffit and will need to make some sort of shield to prevent that. I am not sure how waterproof it is and my location under the soffit gives it some protection. Anyway I am happy with it and it seems good value for money especially as it has a PSU.

I use this about 10ft from my cctv camera to cover a dark spot. Works flawlessly

Bought this for my PSVR2 to see if I could play it in the dark / improve general tracking, and I can see the light through the passthrough camera. This light doesn't really offer much of a wide cone, and ends up just lighting up a small section of the already tiny room I use for VR. Can't objectively say if it caused tracking issues for me but I ended up not trying to play in the dark with it.

120620 Update after 6wks installation the light has obvious signs of moisture ingress. Very disappointed after such a short time. Downgraded from 4 star to 1 star review. Will buy a more expensive unit next. Don't wast your money. Product arrived on time well packed. Installation easy. Light is bright considering it's small size. Beam is relatively narrow but good enough and was as described with 60 degree beam angle rather than a floodlight. Only slight negative is the bracket holes for screws and cable inlet don't have much in the way of waterproofing as supplied so used some PTFE tape around the screws and tape around the cable entry point to hopefully seal against potential water ingress. Time will tell how long lasting it is but at £15 has significantly improved the night vision of my Ring stick up camera.

I only use this for illuminating my play space at night when I'm using my Meta Quest 2 VR headset, I get perfect tracking in low-light. Would recommneded!

Match this with an Imou Ranger 3 or 5 megapixel camera for night vision if you want an indoor setup. This image was taken with an older 2 megapixel Ranger 👇

Very solid considering the price. Only quibble is a faint red glow when on.... I suppose they want us to know it is on.... which does so under low light.

Erhellt sehr schön, wo das Infrarot meiner Dahua Cam etwas schwächelt. Abstrahlwinkel geschätzt ca. 90°. Ich habe zwei davon gegenläufig (einer nach links, einer nach rechts strahlend) montiert, um den Video-Bereich in der Distanz von 5m von oben optimal auszuleuchten. Die Stromversorgung habe ich übrigens über PoE Splitter am PoE Switch mit Y-Adapter am 12V Kabel gemacht. Alles kein Rocket Science, nur zusammen stecken. Perfekt und würde ich so wieder machen!

Acquistato per illuminare una zona periferica del' inquadratura di una videocamera di sicurezza esterna fa egregiamente il suo lavoro, molto potente illumina a giorno il suo settore,era proprio quello ché mi serviva ,ottimo articolo. Aggiornamento: Marzo 2019 ho acquistato il secondo illuminatore identico al precedente con piena soddisfazione di entrambi, illuminano aree periferiche ma importanti poco illuminate dai led delle videocamere con un fascio di infrarossi molto potente e che arriva alla giusta distanza per le videocamere. Quindi a mio parere sono perfetti per il loro utilizzo. È vero che guardando il faretto al buio si vedono distintamente i 4 grandi led rossi, ma questo mi pare normale.

Solid little unit, LEDs are seen as redish purple, I mounted the unit in the top corner of the garage door frame nearist the camera.. Reason for use, to lighten dark area near keypad due to roof overhang blocking that area and to help see near the bushes and for anything parked on driveway. For scale, road is about 40 feet away from main 180 camera. I like that the LEDs are seen to help deture a would be....... Pictures taken in total darkness, no white lights on at my house, at around 11:30pm. Nor do I use camera's IR lights, this helps keep bugs away and others from seeing the camera location at night. I hope this helps anyone reading.

Me permet de jouer ou de regarder des films sur mon Oculus Quest, la nuit dans le noir total. L'illuminateur IR, produit à la fois une lumière quasi invisible à l'oeil nu, et extrêmement puissante pour les caméras de l'Oculus, lui permettant de fonctionner comme si on était de jour. La pièce est bien sombre vu de l'extérieur du casque, mais clair vu de l'intérieur du casque. Fonctionne comme attendu, même si ça n'était pas spécifié pour cet usage dans sa description. Je le pose au sol, pas besoin d'être face caméra, IR compatible et très puissant, juste ce qu'il me fallait ! Je recommande vivement ce produit.

Los acabados son los esperados por este precio, pero funciona perfectamente. Lo compré para usar las gafas de realidad virtual Meta Quest 3 en la oscuridad para mayor inmersión y funcionan perfectamente, lo tengo en una esquina de la habitación apuntando al techo. Hice algunas pruebas con una cámara de video antigua con visión nocturna e ilumina bastante, pero si le quito el cristal tintado con el que viene la diferencia es abismal, ilumina como 10 veces más. Se lo he cambiado por un cristal de metacrilato satinado que he cortado a medida. No se si para las gafas RV es necesario, porque cuando hice las primeras pruebas no parecía que tuviera problemas de rastreo aun con el cristal. Es muy fácil de quitar, va enroscado. De paso aproveché para desenchufar el sensor de luz de la placa de circuitos para que esté siempre encendido, lo enciendo y apago con un interruptor Tapo desde el móvil. De serie viene con un sensor de luz y solo se enciende si la luz está apagada, lo cual no está mal, pero me parece que también regula la intensidad, además igualmente para este uso no me interesa que esté encendido toda la noche, por lo cual el sensor no me sirve.