FastCap 80208 2P-10 Professional 2 Oz Thick Wood Adhesive Glue | Ideal For Wood Works, All Purpose Application, 4000 PSI Tensile & Sheer, 80208

This is going to be my 'go to' glue. You get quite a bit of glue for your money. It is strong, but if you goof and have to remove the screw you used it with, or whatever, I've been able to do it. So, it's strong enough to hold (probably permanently), yet if the need arises, and you have to uninstall the metal item that you used it on, you can, with hand tools and some effort, reverse the job. I also like the consistency of the gel. It tends to stay where you put it and not drip..not that it won't drip if you use way too much, but it hangs in there quite well. I've used it to repair just about every plastic shelf in my refrigerator and have found that it not only produces a fine, strong repair but if you are careful not to apply excess glue, the repair is almost invisible. I have two cons that have nothing to do with the glue. As you can see on the product photos, the container is tall and thin. This makes it prone to be knocked over, especially since the spout works the first time you use it but is unduly difficult to clean out and use again. So, you unscrew the cap, usually requiring a pair of pliers, and access the glue with a cotton swab, or whatever will fit. At that point you face the decision of whether to apply the glue which is then hanging on the end of your swab, or somehow set it down and screw the cap back on the bottle, then apply your adhesive. I've usually chosen the first option, which works great, except, careful as I am to put the bottle of glue out of the way, I've spilled it. It took 30 minutes to (about 5 minutes, post-spill) use various household cleaners, scrapers, and steel wool to remove it from my hardwood floor. However, the clean-up worked. I wouldn't dream of using acetone on most spills. It would most likely do the job, but the risk of surface damage would be high. The second 'spill' was purely due to my stupidity. I set the cap of the bottle right down on the hardwood floor but caught it quickly and in 5 minutes, the glue was gone and the floor was not damaged. Summary: Really great glue, obviously engineered to be strong, yet easy to use. It's 100 times better to work with than super glue (and I think as strong, or stronger). Con...the bottle is too easy to knock over. Whatever happened to the glue pots of yester-year? Finally, if you have a large bolt or some other heavy object that the glue bottle will just fit in, that will solve the spill problem, even a small wood clamp should sufficiently stabilize it.

This is a great wood glue. I have used it for years and it creates strong bonds and tight seams. You can use it with the activator and it will bond in a few seconds, or use it alone and it will bond in 10-15 seconds, and cures in five minutes. My only suggestion is to dry fit your parts and be ready to position pieces the first time. Dries clear.

Hands down, the best (quick-set) glue that I have used. I bought this specifically for installing pool cue tips (by the way this has a far superior hold than even the Gorilla brand- surprised me too), but have found myself using it for multitudes of other items.

This is an excellent and strong glue that really holds things together

Pleased with product - exactly as advertised. Works fast. Would get 5 stars but I feel it is on the expensive side. I would not less cost prevent me from buying again, as I simply like things that work.

Heard about this on YouTube DIY channels. Works great on bare wood. Recommend for use on joining angled joints together such as chair rail, baseboards, and crown moulding. Make sure the two surfaces to be joined are bare wood. Small amount will do the job. Great for joining corners to avoid ugly staples and finish nails

Good stuff!

It dries fast enough for me to use it instead of ca and accelerator. I like the consistency of it and especially the hold. I've used it on wood, porcelain, and tile so far. I'm very pleased with this glue. It works well and was less expensive than my old "go to" glue.

When paired with the activator, it bonds nearly instantly. Could not recommend a product more than this.

This stuff is awesome! Most of the time I use it without the accelerant.

This is a good product. I was looking for a single stage glue for small parts in scratch model building, not a glue that you had to mix together to bond and that gave you a little more time to set properly. This product works well.

Great product. The viscosity is low and I manipulated it easily

Efficace