JONSBO N4 Black NAS Pc Case, Walnut Wood, 8-Drive Bay/6 * 3.5 "HDD (4 hot-swap,2 Non hot-swap),2 * 2.5SSD,Micro ATX Chassis, USB3.2Gen2Type-C, 1x120mm Fan Built-in, Black

The case is excellent. I upgraded from an old NAS case from the 2017 era, which had become difficult to work on. At one point, a screw even fell onto the motherboard without me noticing. Luckily, the motherboard went into protection mode and only needed a hard reset. Although it was more expensive on Amazon than at other retailers, none of them had it in stock with immediate delivery, so I can’t fault the case for that. I replaced the supplied fan with a BeQuiet and added a 60 mm Noctua fan. There might even be space for a 40 mm fan, though I’m not entirely sure. Temperatures are far better than with my old NAS case, and it looks much better too.

I was surprised how much I loved this thing once it arrived! Pros: - No sharp corners or metal. Compared to some of the devices I've received, especially how much you have to grab and reach into the case to e.g. route the SATA cables, there are no sharp edges I've found. - Very compact given the # of bays, and SATA backplane (left side) works great. Left side of bay is hot swap, right side has to be manually set up, which is a little annoying, but the price you won't hear anything bad out of me. - Looks amazing. I love looking at this in my homelab setup. - Quiet, takes a regular SFX compact power supply, doesn't have any giant extra fans like getting a decomm'd enterprise server off eBay. - Powerful (or as powerful as you want it). Since it just takes a MicroATX board, I have consolidated many services into one including all my Proxmox VMs, as I installed my own Ryzen 5600 processor instead of having to deal with some integrated low-end N95 or 100 CPU. Has room for 3 or 4 PCIe slots (half height) on your ITX/mATX board as well. Cons: - As mentioned, having the right side bay (inlcuding the 2.5" drives) need to be manually set up with the SATA power and cabling is a bit of a PIA. But this is a very inexpensive device. But I only needed two drives on that side. - No remote console. You can obviously DIY one yourself (I got the AOOCOO HDMI USB KVM Extender Over Cat 6/7 to solve this). Some IPMI module with built-in power would be ideal, but again this is not enterprise hardware and it's certainly not enterprise pricing. I am super happy I took a chance on this, will report back if I have any issues, but so far it's been at least a month and has been smooth sailing.

Pretty happy with this case. I was initially confused that it did not come with drive trays but that explained itself when it comes with hardware that essentially makes the drives themselves trays. Case looks good. Its a bit tight behind the non-backplaned side of the drive tray area and keeping cables clean is a bit of a challenge. The fan is loud but considering its the only one in the case besides the cpu cooler I'd rather have the airflow than it be quiet.

Fairly loud fan, nice case otherwise. Fits my needs pretty well. Don't forget you need an SFC PSU, and modular is really handy to keep the voids as clear as possible for airflow.

Unsurprising to anyone this case is somewhat cramped to work in. Anyone with any system build experience could have called that. What couldnt have been called however was how obnoxiously bad the included fan is. When i tried running the NAS i built in it over night all i could hear was this low pulse constantly through the night. Eventually i turned it off from my phone and ordered a noctua fan for it. Upon inspecting this bundled no-name fan i noticed it had a very pronounced wobble which was likely the culprate of the awful noise. After a fan change and opting to use the 4-pin fan header on the motherboard instead of the 3-pin header on the daughterboard the acustics arent bad (and the cooling is ever so slightly better) Another issue that is minor for me but could be major for someone else: be sure to observe the length of the motherboard power connector on your PSU. You want something thats over long so you can route it off to the side and back around instead of straight through the front side as doing this will make the top 2 drive bays un-usable. Not a deal breaker for me but if you had planned on using all avalible bays this could be an issue for you. This probably goes without saying but i highly recomend a modual PSU to pair with this case because, as stated previously its very cramped and while you have basically 360 access to the top chamber you dont have the same ease of access to the bottom chamber. If you are planning on using this case for a system that does more demanding tasks than acting as a home storage or media server i would probably look elsewhere as there is only 1 120mm fan mount and there isnt a lot of room for a GPU or a good cooler for a modern high end CPU. Still for a NAS for a home lab or media server it's beautiful and functional. Ps: also be aware that there is a green indicator light on the daughter board that is very apparent in the dark. I mention this because i was unaware of it until i had gotten it up and running and i couldnt find infor about this anywhere prior.