Robustrion Microphone Suspension Boom Scissor Arm Stand

1. product delivered on time thanks to amazon and team.2. this boom Scissor Mic Stand is made for normal MIC. but I was looking for condenser MIC stand. But the same stand for Condenser MIC was costing more than 3.5 k.. so what i did is i ordered shock mount for condenser MIC for 550 rs and pop filter for 300 and total it costed me 1600 along with this stand which is a super deal... if you are looking for condenser mic stand with boom scissor go with it ...3. product quality is good... no defects in this product what so ever... i loved it...hope this review helps ...

The product is good quality is decent. when I ordered it I never felt like it can hold snowball with a heavy pop filter but I took a chance because I know we can return it if it doesn't work and I' must say it easily hold 1k weight after tightening the screw.Pro:-The product is metalLength is enough for home useit can hold up to 1 kg to 2kg weight if you tighten the screws. For me it is holding around 800 - 900 gm weight.Cons:-I think because it is not available in the local market that is why it is expensive but I don't think it worth more than 1K INR.it feels like if you tighten the screw more it will damage especially plastic handle of the screw.The product is nice you can buy without thinking too much if your budget is tight. Though I still say it is not worth more than 1000 RS which is more than enough for the quality.

Its quiet cheap. I bought it for using my blue snowball ice microphone, and it did the job. I can pull and adjust the stand to my liking and it stays fixed firmly on the table. Also the clip which grabs on the desk and is the base of the stand, its quiet easy to fix on the desk. Very nice product.

Light and flimsy, should be used only with light mics. The only condenser I know of that it 'might' support is the Blue Snowball. With my other heavy condensers (CAD etc), slowly starts drifting down, and generally doesn't feel solid enough to trust expensive mics to. Is also pretty small, won't clear a large monitor if put at the back of a table. Bought the Rode arm now, is much bigger and stronger (and expensive).Please refer photos for direct comparison with Rode. Note that two of the photos have a Blue Yeti and a CAD Gxl 3000 on this arm, but I don't recommend it for them, or for any heavy mic. Haven't tested with light mics.

Have a channel on YouTube Mumbai market masala for my cooking recipe it's a blessing this product helped me to make study video top angle result best value for money you must buy if you are making any cooking video

The product is ok and definitely not worth the price it commands. There are a few things that needs to be mentioned here:1. The product build quality is average and it doesn't feel solid when heavy microphone like Shure SM58 are attached to it. I doubt if it will last long when used with such mics.2. The Mic Holder that comes with shure sm58 does not fit to this stand. You will have to use the mic holder supplied with the stand. The Mic Holder is of poor quality and one always fear of Shure slipping out of the holder when at certain angles.3. The vice used to fix the stand to a table is also poorly built. The Steel ring that clamps to the table is fixed to the screw with a tiny metalic pin, which in my case was loosely fitted and came out easily. It is very cumbersome to put it back in place to prevent the steel ring from falling out of the clamp screw.

Amazon delivery is appreciable. But the built quality of the product is not up to the mark. If you have a good quality mic then this Arm Stand is not for you. For this quality its price is way too high.Each connecting point whether mic holder or the mounting clip both are very poor. This has a nobe to tighten the stand between arms that too is also of very poor quality.If you mic came with holding stand then only you can use it. If you rely on the holder this stand has, you are risking you mic.

previously, I used many boom arms, they had at least some issues, I cannot attach, some of them to my table, some took extra space. but this boom solved everything. It can be mounted anywhere and the Build quality of this is also good as compared to others.