Stem Projects Toys for Boys age 8-12 12-14 Science Kit Building Own Bluetooth Speaker & FM Radio DIY Electronics Kit Science Experiments Kid 9-12 Boy Toys Birthday Gift 8 9 10 11 13 Year Old Teen Girl

Purchased this as a gift for my 13 year old nephew and it was a hit! Easy to put together with his grandpa, sound was great, and he now gives news reports to is family from the radio. Great gift.

Got these for my 10 year old grandson for Christmas. He loves science and building things and of all the presents he received this was the first thing he sat down with, building the FM radio. Assembly was straightforward with great instructions, radio worked first time. He and his 8 year old sister have carried the radio around listening to it fascinated that it gets signals off the air and needs no internet. Excellent value for the reasonable price, I was surprised at the good quality. Both the radio and Bluetooth kits are great, fun projects that are just the right size for the budding STEM students.

It was a gift and he's very happy

Great little build, not recommend it for the 5-year-old. As it says on the box, the screws are very, very small. Nice little thing to do while I'm recuperating at home.

Putting this together turned out to be quite challenging, much more than I expected. My grandkids, aged 8 and 10, and I had a tough time assembling it. The screws are very small and tricky to hold. Additionally, the instructions were not very clear. For instance, when we tried to thread the wires, they didn’t specify that we should not remove the part that was cut before threading the wire. After some trial and error, I figured out that we needed to thread everything first and then remove the cut section. In the end, everything worked great! The sound quality from both speakers is good. However, the volume increase button on the radio does not work, but everything else functions well. It was also easy to connect the speakers to Bluetooth.

Pretty cool project, comes with (almost) everything you need to make a Bluetooth speaker AND an FM radio. Maybe not for a 5 year old unless they have an unusual amount of patience and interest and you plan to mostly do it yourself. Seeing the parts go together to make something useful is great for all kids but I think this is more for an 8 yrs and up. The box says for 5 year olds but the directions say 8 year olds. The only part of the project than can be a little tricky is the wire connections. I RECOMMEND ALSO ORDERING SMALL FEMALE SPADE ELECTRICAL CONNECTORS IF YOU ORDER THIS STEM KIT. You either need a soldering iron/kit, and experience using one, or you can use small spade connectors like those commonly used for speakers which is what I used and recommend. The instructions are less than perfect so I'm going to offer what I'd recommend doig to use in conjunction with the included directions. 1. Using a utility knife, sharp chisel or knife (WITHOUT CHILDREN PRESENT) score or completely cut wood pieces out of tabs, or just break them away if you don't care if it comes out perfect. 5 minutes. 2. Use a small piece of sandpaper on all of the pieces to "break" the edges and make it more comfortable to touch and less likely for end grain to splinter. 5 minutes 3. If you want to color the wood or put a finish on it I'd do it now, before assembling, after assembly is fine if you just color it or hand paint it. NOTE/WARNING ABOUT FINISHES: Please don't use store- bought stain/ finish/ varnish, commercial BLO, or anything that has the word "finish" unless you plan on using a few coats of shellac or other kid-friendly sealant/ top coat and give it time to dry and cure. I used markers for the front panel and stained the top and sides with a used coffee pod, then lightly sanded the raised grain again. I sprayed 2 coats of Rust-Oleum 2x clear satin and allowed cure time. In hindsight I should have used shellac, mineral oil, cutting board oil or 100 percent pure tung oil (not "tung oil finish"). 4. Use a medium- large electrical crimpers or pliers and crimp the spade connectors onto the wires that will be pushed onto the speakers and other components. For the wires that need to be joined together, use both wires twisted together and crimp into one side of a connector only (not what they're made for but it works). 5. Use a #1 Phillips screwdriver to assemble everything following the pictures in the directions, try not to over tighten. I believe the short 4mm screws are for the circuit board but I don't remember, I know the longer ones are generally for the wood to wood connections. I also added stick on rubber feet to protect surfaces from the screws on the bottom of the speaker. Have fun and good luck!

Muly kids loved it !! Easy to build with them...

Reserving opinion until the recipient gets this but was very disappointed that the box is marked ages 5 and up. The description says 8-12, 12-14. Not even sure I will give it to a 13 year old.