FaréclaG3 Advanced Liquid Compound 1L (AG3/1400) – Medium to High Cut Compound for Automotive Paint, Removes Swirls and Fine Scratches, Delivers Permanent Results, Use by Hand or Machine, No Fillers

Brilliant stuff very pleased

It's a Farecla product as used by the pro's in many paint-shops, it's good. It works well, as long as you know how to use it - don't expect good results by hand with this product, 1100rpm is about the optimal application speed on a rotary polisher with a foam mop. Used it to polish out some 1200grit marks left over from de-nibbing a fresh 2K clear coat then switched to the G10 Advanced Liquid Compound before a polish.I would not advise this is used as a maintenance product on a car unless you are wanting to remove very bad scratches in a clear or solid top coat, but if they are down to base/primer you will not get them out anyway, using this too often or too heavily will simply remove your paint - it is a cutting compound.

This product is just brilliant, with very little effort needed, either applied by hand or or use a machine, like I did , but make sure you apply some water to reduce any heat,I use a squirt bottle , and never use in direct sunlight always try an small area first to see the results, I found this g3 is perfect doesn’t remove to much paint ,but is great at rejuvenating dull paint work, far better than T CUT , I would usually do a couple of panels at a time , just take your time ,for great results

Works brilliantly, alot better than T-Cut gives a superb finish ready to wax. Only complaint is the neck cloggs after being left for a few weeks and then simply becomes a cap as one unscrews and just pours out of bottle.

Does the job asked of it

Really really good at a great price.Makes cutting back a breeze ready for wax!

Used this on cellulose paintwork with a soft pad on a DA and it removed 95% of the scratches and swirls, may well have got them all out if I was a bit braver with the DA but it brought out an amazing glass like shine to the paintwork. Would definitely recommend. Works much better with a DA, I couldn’t get anywhere near as good results by hand.

This is what body shops use to finish paintwork so as long as you know what you're doing - it won't do you wrong.Works in well with a 7" pad and comes off easy leaving a good prepared surface for polish/wax.