EWA MagOne 3rd Gen [Compatible with MagSafe] Phone Grip Stand with Finger Strap, Removable Magnetic Ring Holder Kickstand Loop for iPhone 17,16,15,14,13,12 Series (Black)

I will forever love this product!! So underrated. I have had mine since june 2025. I never took it off my phone case since. Im leaving this review on January 30 2026. Its still in really good condition, nothing is loose or anything (many grips I’ve used in the past have loosened over time). It is flat and sleek and the magnet is strong, it never fell off my phone and works very well with the magnetic phone mount in my car. The ONLY thing is the band which you put your fingers through to grip. It got dirty and wore down over time and finally broke TODAY. but i literally use it everytime i hold my phone. Best part? They send an extra replacement in the package!! So i just have to replace and it will look brand new. I’ll always tell everyone about this versatile product 🤗

So far I had bought all versions of this product. I used to use Lovehandle prior to MagOne. And to be honest it was an amazing product because it lasted 1.5 to 2 years the entire time you own your phone. Before iPhone released the magnetic back, Lovehandle was perfect as you stick it to the back of the case and the double sided 3M tape never came off almost impossible even if you wanted to take off, extremely secure. But with MagSafe capabilities I didn’t want to commit to permanent phone grip. This makes MagOne the perfect solution. The first version was good, but had a small flaw where a small piece holding the retention pin came loose when I dropped my phone once and I wasn’t able to securely put the retention pin to be able to use the phone. The second version did solve the problem and came with various silicon replaceable grip. Which is a great idea in theory but some of the relaxed silicon grip doesn’t last too long and falls apart after 4-5 months. You can buy replacement grips, I just wish you can a specific one instead of the entire variety pack as I don’t like the one with the ring or circle in the center. Nor do I like the looser/more flexible grip. The thick stiffer grip is the best. If they sold a pack of 5 or 10 I think they would be golden. But I did wish they had elastic grip. The 3rd version has improved the design dramatically and I am optimistic for the most part. The new design does have elastic grip, I am not sure if the grip will maintain its strength for 1 or 2 years. Much easier to replace the grip and it can rotate 360 degrees. Not a huge feature for me but could be for many people.

Let me start off by saying I looove this product. I bought it 1 year ago and it was amazing up until right this second when the kickstand finally loosened too much to worn anymore. I did also have to reglue the fabric part that you stick your finger through a couple of times, but it’s well worth it. I’ve had pop sockets and other type of rings and such on my phone. This is by far my favorite. It’s comfortable to use, the stand works so well and is very versatile. I love that it comes with backup parts and a sticker for your case or phone so you don’t scratch it. The only reason I’m giving it 4 stars is because it only lasted a year. It is disappointing to have to replace a product that soon after buying it, but with that said it does get a lot of use and was really sturdy until just a few days ago. I just purchased a new one because I do like it so much that it’s worth it to replace to me.

BLUF - I don't recommend this one. This is a neat product that fits nicely on my magsafe S26 Ultra case. Right off the bat, I have to note that the magnet is not very strong. The magnet in the case side is good, but the magnet in the outward facing side is weak. I use a magsafe wallet and the wallet comes off way too easy. The ring I had before this one has two strong magnets front and back. Taking the wallet off meant I had to prepare myself because it was going to be a skirmish. This ring means I just twist my wrist and the wallet comes off. It also comes off if I drop my phone from 3ft off the ground. Another example is the magnetic phone mount I have in my Jeep my phone dropped on every little bump or dip I went over! I took it off because the case magnet is very strong and holds my phone just fine. On a good note, the ring matches perfectly with my orange case. I mean it looks great! I gave 3 stars because no matter how good it looks, the rings drops my wallet and my phone. That means the magnets on both sides aren't that strong at all. I don't like dropping my phone and especially don't like dropping my wallet. I'm returning mine.

This is the one! I researched for literally hours for a magsafe kickstand with minimal bulk that could prop up a foldable phone and after returning 4 other competitors this one was the winner. I have the Google Pixel 10 Pro Fold with a Thinborne case on it. This is relevant to the review as the case is very sleek and adds minimal bulk. I needed a phone grip that did not stick out further than the camera bump with this case. 4 other brands were close but bulkier which created a wobble whenever the phone was laid down flat. This one perfectly protrudes just as much as the camera bump with the case on it. Balance is as good as it gets with a phone grip and the pixel camera bump design. As far as the functionality of the grip it feels very well made and sturdy. For non-foldable phones or foldables when closed it props it up perfectly with no falling. Unfolded phones will have some teetering if not propped up to a specific angle, but this is just the nature of these magsafe kickstands. Most unfolded use is for watching something so it's not a big deal to me. As far as the finger grip it's comfy, adjustable, and importantly removable entirely if you need just a sleek kickstand. I was going to rock it without the grip but it has grown on me. The product comes with a spare grip for when the original stretches out. And replacements are relatively cheap. Long story short if you're looking for a minimalist, sturdy magsafe kickstand with grip this is the one! Especially if you have a foldable. 10/10!

The ring is low profile so my phone doesn’t do a lot of wobbling when it’s laying down and it goes smoothly in my back pocket. It’s got a fantastic magnetic grip, so much so that sometimes it’s hard to pop it off for nightly charging on my MagSafe stand. It’s a good problem to have. But I think that’s more the problem with my case because the instructions say the ring can stay on for charging. The elastic ring also doubles as a fidget because it rotates for however you need to use your phone. They also sent a magnetic ring so you can use it in a non MagSafe case. And protective film to apply before if you don’t want the ring scratching anything. I didn’t apply it and it hasn’t scratched my case. Save the inserts it comes with! I love that they send two of the elastic pieces that just pop in but I had an issue that the elastic came unglued and wouldn’t stay when I tried to fix it and they sent me a replacement free of cost to me. Because of how easy they were to work with, I 100% will buy from them again.

Item works great. It does heat up a little once I do wireless charging. Love how flat it is and the stand works for both landscape and vertical. Does comes with extra bands and they seem sturdy. My only problem is that my finger are a little chubby so it tends to be a little tight on the finger. Wish it would come with a band that was a little more stretch since it will numb my finger. But my wife who has smaller finger loves it.

I purchased this in November of last year and although it was nicely packaged, looked sleek, and was very low profile (all things I wanted), it was also very fragile. The magnets on the outside that are designed to allow the phone to magnetically attach to surfaces like refrigerators, gym equipment, or golf carts, etc. were very weak and the phone would just slide down or fall off. Although the low profile is great and allows full wireless charging on phones without cases or very thin cases, it is not thin enough to allow wireless charging with more rugged cases. The plastic inner ring does allow the finger support loop to easily spin to adjust to any insertion angle, but easily wears down over time and no longer “clips” into the main ring, so it falls out whenever taking the entire magnetic ring off of the phone to wirelessly charge. The elastic band of the finger loop was comfortable but also only glued onto the plastic center ring, rather than being a full loop, so the glue easily comes undone with any sudden force, such as almost dropping the phone, or even attempting to adjust your grip and accidentally pulling a little too hard when putting your finger into the loop. Ultimately it is a nice MagSafe ring but possibly only for smaller, lighter, phones and for people who are more delicate with their usage. It doesn’t hold up to regular everyday heavy usage or heavier phones like the Max Pro versions of iPhones.

It's aight. I wished that the flip out ring had a bit more resistance so that it could accommodate a wider range of orientations when standing my phone up. The most disappointing part to me though was how weak the outer magnet is. Putting it onto my PC mounted MagSafe holder it doesn't feel secure at all. The slightest touch could send it tumbling to the floor.

この商品がさらに進化する事を願ってレビューします この商品のレビューにあたり、自分の使用環境を記しておきます ⚪︎スマホ ・iPhone17 pro max ⚪︎スマホケース ・TORRAS Guardian-Mag ⚪︎充電器 ・enGMOLPHY MagSafe対応車載ワイヤレス充電器 ・THREEKEY MagSafe充電器Qi2公式認証 25W高速充電 冷却ファン付き ・Apple純正MagSafe充電器(iPhone12発売当時の物) 購入から3週間経ちました まず、この商品の最大の魅力はなんといってもスマホリングを付けたままMagSafeワイヤレス充電が可能という点です スマホリングを付けたままワイヤレス充電できると明記されている数少ない商品の一つです 実際にどうなのか？ ちゃんと充電できます いちいちスマホリングを外して充電する、また充電器から外してスマホリングを付ける、この煩わしい手順が無くなります 画期的です 他のスマホリングもこの機能を取り入れて欲しい！ 柔らかい伸縮バンド(エラスティックバンド)も触り心地が良く内側のリングが360度回転するのも便利 外側のリングは回転しないが簡易スタンドとしては悪くは無いかと 見た目もシンプル、機能もシンプル、でも他にはない機能もある、そんな唯一無二の商品です ここからは実際に使ってみて気になった点、良かった点など まず参考になるかは分かりませんが、私のiPhoneの重さを測ってみました iPhone17 Pro Maxが253g(レンズユニット保護のプレート、USB-Cのマグネットコネクタ含む) スマホケースとスマホリングが合わせて56g スマホ、ケース、リング合わせて309gでした ①磁力が弱い(弱くなる) 商品ページにも記載されている通り、パッド型ワイヤレス充電器では無くマグネット式ワイヤレス充電器を推奨します 私の使っている車載ホルダーとTHREEKEYのMagSafe充電器では落ちないが軽い抵抗感で外せる程度の保持力になります 指一本でスマホの向きを縦横クルクル回せる、結果オーライ！便利です 商品を購入してからほぼ毎日使っていますが、車の振動程度では落ちた事はありません 悪路(凸凹した砂利道や林道などのオフロード)はまだ試していませんが、高速道路の走行も問題無しでした たぶんオフロードを走ったら落ちると思います THREEKEYのMagSafe充電器はカメラアームにマグネット式スマホホルダーを付けてTHREEKEYの充電器を付け(両面マグネットなのでくっつきます)、そこにこのリングを付けてマウントするというややこしい事をしていますが、要するに家でもこのスマホは充電中垂直にMagSafe充電器に貼り付けてある訳です 手や腕が強く当たれば落ちてしまいますが、逆に外す時は片手でスマホを傾けるだけで充電器から外せます(地味に便利です) こちらも指でスマホの向きを簡単に変えられる為ちょうど良い磁力になって結果オーライです 私のApple純正MagSafe充電器ではくっつきますが触ったり充電器のコードを持って持ち上げようとすると簡単に落ちます また、この充電器を付けた時カタカタします(充電はできます) おそらくバンド部分が当たってシーソーしているのだと思います 上記の他2種類の充電器ではピタッとくっつくので、充電器側の磁力の問題かもしれません 私の使用しているスマホの重さだとギリギリ耐えられてい、もっと軽いスマホなら保持力も変わると思います ②充電効率が落ちる 商品ページにも記載がある通り充電効率は落ちていると思います 実際に充電時間を測った訳ではないですが体感的にも充電時間は遅くなっている気はします(私は急ぎの充電は有線でするのでワイヤレス充電している時の時間はあまり気にしません) 商品ページには出力20W以上の磁気ワイヤレス充電器とアダプターを使ってくださいとなっていますが、私が持っているiPhone12発売当時のApple純正MagSafe充電器(調べた所出力は15W程らしい)でも充電は出来ました(明らかに充電速度は遅いです) ③エラスティックバンドの耐久性 私はスマホを、仕事中はズボンのポケットに入れています 使用後3日でバンドに毛玉が出来ました オシャレさんは気になるかも？私は外仕事で使う関係上汚れなどある程度割り切っているので毛玉ぐらい気にしません それ以外は今のところ問題ありませんが、いずれバンドは伸びてくるのではないかと思っています そんな時も交換用バンドが付属しているので安心です ④バンドに指を通すに若干慣れが必要か 私のゆびが太いせいもあると思いますが、指を通す時なかなか上手く通せずスマホの裏でいつもモゾモゾしています 最近は少し早くなりました(バンドが少し伸びてきた？) ⑤外側のスタンドリングの保持力 この問題は私のスマホが重いせいだと思いますが、浅い角度だと保持できません 値段はスマホリングとして高くも安くも無い値段です それを考えると、個人的には満足のいく良い商品です

The magnets are strong so you don't drop your phone. After getting used to easily slipping your finger in the band, it Is unusually comfortable to hold. The band is tight enough to give the sense of security yet not too tight that it becomes uncomfortable when holding for longer times. Also the soft fabric of the elastic band feels good on the skin. The deployable ring makes it stand in any angle one might want. Two gripes though: 1) They give you a thin transparent sticker to stick on your phone to protect against scratches when turning the ring. In fact, after a couple of days use, the sticker already shows a circular groove, which makes me worried about the back panel of my phone. It is something they could and should improve on. 2) The magnets of my chargers are stronger than the EWA ring, so leaving it on is fine, but when taking the phone off the ring often remains stuck to the charger. Not a big deal as I can easily take it off before putting it on the charger and it is thin enough to just stick in my pocket. When in a hurry you can just leave it on the phone and slap your phone on the car charger. It charges just fine through the ring. You can worry about prying the ring off the charger when you arrive at your destination. 😊 Edit: I bought a thin MagSafe case and now it's perfect. Not worried about any circular scratches the ring may or may not leave. Ok so with the additional hold of the MagSafe case the ring stays on the phone when you slide it off the charger.

It says compatible with magasafe but actually not. When magsafe charger used it’s charging at 5w speed It may depends on your wireless chrager but it’s nit guranteed Everything else is expected and short life span is ok as it comes with two replacements

Really impressed. I've tried all of the magsafe compatible phone holders out there and this is in my top three... Depending on the use I make it can even top the ranking. The stand is firm and allows to set the phone at whatever angle you want. The strap is comfortable and easy to adjust to either hands you're using. I've read in other reviews of people complaining about the magnet strength and I don't understand the complaint.. it is as strong as it can be, the strength of the adherence depends also on WHAT you're sticking it to... Most of the magsafe-like cases out there are not great. I use it with a pitaka magsafe case and the holder is glued to its back and it doesn't budge but quite the opposite it's hard to take off. I'm very pleased and I'll buy more in other colors for friends and family.