True Mods 49 Inch Smoked Triple 3 Row LED Tailgate Light Bar Strip for Pickup Truck Trailer Vehicle [Rigid Aluminum] Amber Sequential Turn Signal TBT Red Running Brake White Reverse Tail Gate Lightbar

I was looking for a way to put signal lights on my recently purchased vehicle bicycle rack and this works perfectly. It's well built and plug & play ready except for the reverse light function which requires some mechanical skill to connect. If you don't need the backup lights, then it's open, attach, and done. The lights are bright and the attached pigtail is plenty long, but if you need more, don't worry, additional pigtail is included.

The media could not be loaded. This light bar has great sequential turn signals and flashers, running lights, brake lights, and even backup lights. You have to run a separate wire to your truck's backup lights, but everything else works through a standard flat 4-pole connector.They provide a long harness if you need to install a connector, as well as clips if you want to install using that method. The adhesive that comes with it is very strong (be sure you have it in the right place, because I didn't, and it's hard to get off!).I had a problem with it over a year after purchasing, and True Mods, the vendor, was excellent. They responded quickly to my question, and communicated via email when it was easier.Highly recommend this light bar.

Looks great! Works as it should. Easy installation, although I had to screw mine on because the adhesive wouldn't stick to the bed liner material, but I expected that before I ordered it. I used a 7 Pin to 4 Pin USCAR Trailer Extension Wire Connector Adapter to wire it up so it did not interfere with my trailer sensing on my 2024 Ram. I like how its invisible on my black truck until I turn on my lights or hit the brakes. Very satisfied!!! 5 star!!!!

Okay Look! I've been using these pretty much since they first came out! Easy to wire especially if you have a trailer pulling ability already wired into place to tap into. I like to use the clips to screw down over mine because I actually had one pried off my bumper and taken. Yes, they are that cool to have that some will steal it. Because I have had them before, I can replace mine easily because all I need to do is remove the old one and plug the new one into where the old one was wired. I replace mine every 3 to 5 years when they become too cloudy and the light is obscured badly. I actually have two in place. One facing back out on my bumper and another one facing down towards the ground under my bumper. They both together prove a lot of light when connecting up a trailer to the hitch..

This is a plug and play item with minimal hardwire connections for the reverse light option. However, I didn’t want to see any 4-way flat wire showing, so I decided for a full hardwire connection. It took some thinking to figure out the correct wire to link it to, but the end result was much better. To sum up, this product looks great 👦🏻👍🏻!

I spent about a day and a half trying to install this so called plug and play product. The written instructions was vague about the installation process so I went on YouTube to try to find this product and could not find it. Watched to numerous videos of our products and the installation process was all over the place with splicing wires, wiring the backup light function to a wire connection thru the brake/backup light assembly on my truck. Most of the instructors were from the auto repair industry and all of them complained that the manufacturers guidance of how to properly install their light bars was not that informative. I tried to call TrueMods, the product manufacturer and no real answer just some BS about being under staff. Went to the website and found a help tab and started to mentioned the issues I was having but no real help. So what I got to work on the unit is the right & left turn signs and the back up light. As for the brake light function its not working.In addition, what's really disturbing is that I'm getting messages on my display screen saying "a trailer is connected to the vehicle" and then its disconnected to the vehicle. I'm concerned this product is sending mixed indicators to the on board computer and now I'm concerned with a vehicle malfunction.This company needs to produce a YouTube video of how to install their light bar product.BIG DISAPPOINTMENT AND A LET DOWN BY NOT HAVING THE PROPER SUPPORT. IF I COULD UNINSTALL THIS PRODUCT AND SEND IT BACK I WOULD.

I use this light bar because my bikes block brake lights and signal lights when they are on the bike rack. I have researched actual light bars made for bike racks, but they all run in the $150-$200 range. This light bar works beautifully. I like that it is firm, and not flexible. It is very bright, and when I zip tie it to my bikes, it is stable. The only issue, as I noticed, and also see mentioned in other comments, is the connection where the light connects to the wire is weak. Also, the 4 pin connector is not long enough to reach my connector on my car, so I also ordered the 59 inch 4 pin trailor wire extension. That allows me to connect the light without putting tension on the weak connection point. I just wrap the excess around my bike rack. I have traveled with my bike, and hit rain. The light continues to work. And I feel very safe with my bikes on the rack, knowing my driving intentions are very well displayed. I have had this light bar since May 2023, and use it just about every weekend, and as I mentioned earlier, took a few trips with it. BTW, I also ordered the reusable zip ties. This allows me to put them on and take them off the light bar easily. I wrap 4 around the bike and light bar that keeps it snug, and secure. For any of my fellow bike riders looking for an affordable alternative to a"bike light bar", I hope this helps.

The media could not be loaded. Great product, good quality! Especially the fact that it’s the ‘lightsaber’ instead of the single bulb lights. I did use the easy install kit, that’s a recommender btw!