ANYCUBIC 10K Resin 3D Printer, Photon Mono 4 LCD 3D Printer with 7-inch Mono Screen, Upgraded LighTurbo Matrix and Printing Platform, Printing Size of 6.04''x3.42''x6.49''

good cheap resin 3d printer and good brand. got it as a starter printer and i would saychoose an fdm one for starting printers if lookuing to get started because it will smell bad. would recomend an air chamber for it

Picked up the Anycubic Mono 4K recently, and honestly, it’s been a great experience. This little machine punches way above its weight for the price, it’s a total workhorse—prints come out clean, crisp, and surprisingly detailed for a budget-friendly setup. Setup was straightforward, and I was up and printing in no time. For anyone new to resin printing, this thing makes a great starting point without feeling like you're sacrificing quality. It’s got solid build quality, and the monochrome screen helps speed up print times while extending lifespan. Only real downside? It’s USB-only, so you’ll need to transfer files with a thumb drive. Not the end of the world, and am currently seeing if I can get octopi to work with this (Will update here when I get around to it.) If you're getting one, I highly recommend grabbing a wash and cure station too. It makes the whole process way smoother and cleaner, especially if you're printing regularly. Just makes the whole hobby more enjoyable and less messy. All in all, I’m really happy with the purchase. Great starter printer, does exactly what it’s supposed to, and just keeps going.

Amazing printer! Fits in small space. Easy to use, and clean!

Terrible product it fails prints all the time. Was not easy to use it all and after my second print, I started getting an error message that won’t go away. I’ve looked into it, and the only way to fix it is if you buy a $200 part that only they sell it seems like they’re just trying to rope you into buying more money by giving you a crappy product

My grandson purchased a resin printer and I loved the way it printed but my finances were much lower than his so I purchased the AnyCubic. It was in my price range and a GREAT DEAL smaller. I printed the funnel first rather than the test...accidentally...but really turned out to be best choice. I had a VERY serious learning curve. Found out after a few ‘no prints’ that just cleaning the vat on the machine after a print did not leave the printer ready to print again. Nope! Had to peel off the cured rectangle off the bottom of reservoir. After filtering the resin back into the bottle, I clean the reservoir and the plate thoroughly with 91% isopropyl alcohol. I find that this is important in the scheme of things. Starting with fresh clean tools is always good. The next goof was forgetting to screw down the reservoir – mentally excruciating mistake. Very hard to remove failed print from plate. So...after the learning curve, how do I feel about my purchase? I LOVE this printer! It does such a clean, wonderful job that I stand waiting for my beautiful creations to come off the press!

Bought two of these. First one and then the other after about three months. The new one I've had for three weeks and the LCD burned out. The original one is still going strong so I figure it might just be a bad part. $80 screen replacement is cheaper than buying a new one. It works great to tell the truth so I think maybe my second one was just defective.

readyto go the minute I started using it, thank you!

Great starter 3d printer

Para iniciar en este hobbie del 3D es una impresora perfecta.

الطابعه جميله و تحتاج صبر في بداية و ما يحتاج تغسل و ترجع ريزن للعلبه من اجل تقليل تنضيف و ما يكون موضوع طباعه من خلالها متعب و ممل لك كل الي تحتاجه فك طبعه و خل ريزن في طابعه بس تاكد انك مغطيها كويس و يفضل تحط شي فوقها لتقليل ضوء الي يدخل عليها من لبه لان شمس تسبب تصلب للريزن او تقلل كفائه

Some things are missing like the screen protector and the leveler paper, everything else is good

Worst. Printing not coming

La impresora es muy buena y muy rápida aunque un poco pequeña pero con ese precio -calidad es una fantástica opción y si tienes un poco más de presupuesto puedes optar por la ultra que tiene bastantes mejoras. Lo "malo" El fep no se puede cambiar como tal sino que se tiene que comprar el ¨frame fep¨ completo lo cual incrementa el precio (no mucho) y no se puede optar por una mejor tecnología como el nfep o pfa pero también facilita muchísimo y si eres nuevo o no te interesa es una buena opción. También puedes imprimir un frame reutilizable en una de fdm con petg si tienes la opción. Como valor agregado hay bastante repuestos y no son caros y el servicio post-venta también es bueno. Tips Te harán falta comprar varias cosas como (en la caja vienen pero se acaban rápido): Guantes Una máscara profesional Un filtro reutilizable Toallas absorventes Un plancha o bandeja de metal o silicona. También para aprovechar la resolución necesitas una resina mejor que la estándar pero si eres nuevo la estándar está muy bien. Sin olvidar la cámara de curado y el alcohol isopropílico (se puede usar thinner pero daña mucho las manos y los guantes se deshacen)