EasySMX X20 Wireless Gaming Controller with RGB Backlit, 2-Stage Hall Effect Stick, 1000Hz Polling Rate, 6-Axis Gyro on Multi-Platform, Mech Buttons- Compatible with PC/Switch/Steam/Android

Great value controller with Hall effect sticks and triggers. The controller has mech switches so the tactile feedback is good. One plus point no software required just plug and play. To change any settings just use the button shortcuts to adjust brightness turbo mode etc.

It a good controller would be better if it had a pc app

this is one of the best performance to value controller

Right trigger hinge broke after 6 months of light use. The trigger felt loose and when I checked saw that one of the two tabs that hold it in place cracked. Customer service asked for purchase invoice and stopped responding once I provided it.

I really wanted to like this controller because of the features—RGB lighting, Hall effect sticks, and multi-platform support—but the build quality just isn’t there. The thumbstick caps are loose and pop off too easily, and the plastic on the triggers feels flimsy. Bluetooth performance is laggy compared to wired, and it doesn’t support Xbox or PlayStation despite the “multi-platform” claim. Also, there’s no way to check battery level until it’s almost dead, which is annoying. It looks good on paper but feels like a budget product that cuts corners. Not worth it unless you’re desperate for something cheap.

After one month the sticks started moving slowly and i have to press hard so i can move , not recommended

I ordered this controller to replace my current OEM Xbox controller. Pros: What made me choose this were the extra M1-4 buttons on the back of the controller, as well as the extra QOL functionality and compatibility with multiple device types. Initial impressions are that this controller does NOT feel cheap. It feels more premium than my ORM Xbox controller. All of the buttons and triggers have a satisfying, but not annoyingly loud, click. The RT and LT buttons have a neat trick which allows you to turn either (yes - individually or both) trigger into a smooth, longer travel press (like the OEM Xbox controllers) or into a short travel press similar to the RB and LB buttons. This switch can be made in real time with a physical switch on the controller, located near each trigger but comfortably out of the way. You will not easily find yourself accidentally switching them to different travel. The color and vibration controls are intuitive and can be changed on the fly at any time as well with shortcuts built into the controller itself. You can also turn off the RGB if you want to conserve battery life or just isn’t your thing. The Hall joysticks are held on with a magnet, and easily are removed for cleaning by just pulling up. But I can confidently say there is no danger of the joystick head coming off when you don’t want it to during more intense gameplay. I attempted to push hard in all directions to see if this would happen and had no feeling that i could make it happen. Cons: If I had to make any suggestions for improvement, I would say…. The dedicated C (color) button and Screenshot button placements should be swapped with their partner buttons - Screenshot with Select and C with Start. This would make transitioning from using a traditional Xbox controller much simpler for more people. I’ve been using it for a few hours and have found that I need to retrain myself to place my thumbs a bit higher on each side of the controller to hit these buttons, because i keep hitting the C and Screenshot buttons which are located where I am already naturally activating the Select and Start buttons to be. The USB C port for charging and wired use is a great choice, but the port itself is recessed inside of a hollowed out area that makes some USB C cables unable to fit inside and connect to the port. It seems you either must use their included cable, which to be fair is of reasonable quality, or own another USB C cable that happens to be able to fit inside of the recessed hole that the port lives in. Just raise this port up to be level with the rest of the controller body so all USB C cables can be used. Small nitpick, but because of how the A, B, X and Y buttons display their letters, if I or anyone else (perhaps a person not as familiar with game controller layouts) needed to peek down and look at the button letters, it is not possible to read the letters on the buttons without tilting your controller to be directly facing your eyes. As in, they cannot be read properly from a diagonal angle, which most people tend to be relaxed back in their chair or couch with their hands down near their lap. So this means you MUST tilt the controller toward your eyes when looking down, opposed to just looking down. Making these more pronounced and readable from an angle would just be a niche but easy QOL change to improve the design, Overall, great first impressions and seems very much like a great value when compared with the competition - particularly from big brands like Xbox, Razer, etc.

Love this thing

“اليد معايا من 6 شهور جودتها جداً ممتازة أكثر شيء يعجبنيأنه فيها Auto Clicker و أقدر أسوي Customizeمثلا اخلي الزر الخلفي يحفظ كومبو معين في لعبة معينة بضغط الزر يسوي للكومبو كامل بضغطة زر و اليد جداً مريحة لكن لونهاصار مايل للبني حاولت انظفها لكن بدون فائدة”

La neta desde que agarras el mando se siente la calidad, tomen en cuenta que las palancas (sticks) si se sienten diferentes, y solo es cuestión de acostumbrarse, pero neta que 10/10 si están buscando un mando bien equipado y económico.

مرة جميلة خامة وكوالتي