365/395/405nm UV Curing Light–Mixed Spectrum & Adjustable Spotlight for Post-Processing of SLA/DLP/LCD Resin 3D Printer Models, Shoe Icing,UV Epoxy Art & DIY Projects

Great product for the money, bought this for 3D printing to cure resin prints. Used a decently sized cardboard box I had and lined the walls with the reflective tape provided and used some double sided tape to fix the UV light to the box to make a DIY curing station It’s been working great as a temporary set up. The rotating base thing that comes with it is hit or miss, it didn’t really work for me but it hasn’t been necessary.

I needed a UV resin curing light for my SLA prints and came across this one. It comes with US plug, but it's a multi voltage and can be used in countries that use 220V. I didn't want to use an adapter because I don't find it that safe, so I purchased a local wall connector suitable for my country, but the one at the end of this lamp and replaced it. If you want to do the same make sure you know what you're doing! If you're unsure, consult an electrician or someone that does.

Nice and bright. I cure pieces in about 9 minutes for a 360 degree rotation and at a distance of several inches. I like the extra long cord and the power switch on the cord instead of on the case. This disperses light well and is bright enough for me to cure a couple pieces at the same time with the right adjustment for timing. The case does not get hot. The integrated mounting bar is nice and has a good friction resistance without being too stiff or too loose. I highly recommend this one.

Works Great. I bought this to cure 3D UV resin prints and power a solar powered turntable. It just works great. I have it running for hours at a time and haven't notice the LED getting hot at all. Also the inline power switch is a great feature too. I do recommend this for UV resin curing.

If you regularly buy generic items from China, you know that the quality lottery is always a factor. Maybe 30% of the things I buy need to be returned because they're defective. This is usually an inconvenience at best, but it can be a safety hazard when we're dealing with things that plug into your wall and can fry your eyeballs. I got the UV light, plugged it in, and luckily I was holding it close to the floor pointed away from me because the ON/OFF switch was on. There's a tiny line on the "ON" side of the switch, you'll miss it if you arent looking for it. I suggest embossing giant "ON/OFF" letters on the switch. Whatever. I placed it facedown on a small box and started using it to cure some small UV resin pieces. A few minutes later a large truck roared past my window and rattled the table a little. The light blinked out from the rattling. After inspecting the light I found it had crappy wiring. Lightly tapping or moving the light caused it to blink on/off. Eventually it wouldn't turn on anymore and that's why it's getting returned. I will say though that it did a good job at curing the resin pieces, I think about 10-15 minutes is all it would take to cure them completely. Much better than putting them 4 hours in the sun, risking warping them. Also, if you want the free turntable, make sure TO PUT IT IN YOUR CART before checkout. Will update the review when the replacement gets here. Update: Replacement arrived, works fine. The switch was also in the ON position. Feh.

Works well for curing resin printed models. Keep the model far away if you'll be curing for more than a few minutes. Too close and it can turn the model brown especially with light colored resin (think tanning bed). To be on the safe side, I place my models 5 feet away or more.

The lamp gives off plenty of UV light and doesn't get too hot. I used the box it came in to make a curing chamber with the lamp and a light powered turn table. works great!

Light works great! Got a replacement as the first one was DOA came fast and has been a workhorse ever since for curing prints from my Elegoo Mars resin printer.

Cumple lo que promete, funciona muy bien! Lo recomiendo

Es una buena lampara UV, llego con todos sus accesorios, la cantidad de cinta reflejante permite hacer una buena cabina de curado y la base giratoria solar 100% funcional