Phanteks Eclipse P350X (PH-EC350PTG_DBW) Compact EATX Mid-tower Case, Tempered Glass, Digital RGB, Black/White

First off - I find this to be a VERY attractive case. The built in RGB is tastefully done - not like that brash "in your face" disco style that some others do. The built in addressable RGB controller means you have everything you need to run moving patterns without any software, and it daisy chains out to run additional rgb accessories you might want to add. It can also connect to any ARGB motherboards so the case can run off that if you'd like - but be aware there are 2 major types of RGB: Addressable (3 pin) and not (4 pin)... The addressable 3 pin style is the newer tech that allows "moving" display, while the older 4 pin style can only change in solid colors. Many companies like Asus advertise their "Aura Sync" RGB features - but even that comes both ways and the 2 are not directly compatible with each other. IE - my Asus Z390 Prime-A motherboard advertised "Aura RGB", but it uses the 4 pin style that cannot connect to the P350X case. Not a deal breaker for me, and if anything it's the motherboard that has the older technology.The case build and materials are better than their $69 price suggests, but the screws don't go in quite as smoothly as a $200 case would - but in reality, how many times are you really adding and removing pci cards and the like? Again, hardly a deal breaker.In my opinion, this case is designed for air cooled systems - while you could fit a 240mm AIO in front, I think a 280mm AIO might be tight, and the bottom "basement" goes right to the front so anything longer will not fit. Likewise, although you can fit some fans up top, there isn't enough clearance for an AIO. And while I guess you could mount a 120mm AIO in the exhaust fan area, I doubt that would work well.But again - this case was designed for air, and in my humble opinion a good air cooler performs as well as an AIO and will run trouble-free for much, much longer. With that in mind, be aware this case only comes with (1) 120mm pwm fan mounted at the front - you are really going to want to add at least 1 if not 2 or more fans to this system (in addition to the cpu cooler). That pushes the actual price up towards $99 which puts it in direct competition to the Be Quiet Pure Base 500DX and the Cooler Master H500, both of which come with more fans out of the box. I seriously considered the 500DX as it is very similar in appearance to the P350X (and has the same airflow design, if not a tad better), but it is nearly 2" wider which makes it look a bit "squatty" to me. The H500 is a great budget airflow case, but I was looking for something different from the "rgb fans up front" look. But you probably couldn't go wrong with any of those at the same basic total price.Building my system in this case took all of maybe 30 minutes - it was very easy and there's plenty of space for cables and wiring. The front leds connect through a clever pin contact system so there are no wires attached to the front (which you need to remove in order to locate the hidden parts box that is stored in the front bottom 3.5 drive trays). It's well thought out, with attached Velcro strips in the back side for cable ties. There is also a removable dust filter under the power supply area, which is designed to mount fan down since the "basement" enclosure has no other source of air.All in all I am very satisfied with this case - it looks great, was easy to build and the materials seem upscale for the price point. Just be aware you really need to add a few fans to it.

My uncle dropped my case trying to help me during my move out. He dropped it from waist height. Though to my surprise, the tempered glass was completely untouched, while the scratches aren't that noticeable. I would give the case 5 stars for that alone.#Pros:- The tempered glass is quite strong. It's easy to open that side if you want to tinker.- I love the embedded RGB light streaks. Lightnings are very subtle, and you can change them on the fly. They definitely add some flair to the case especially in dark environments.- For the price, hell yeah, it's a big value. It's almost half the price of any other RGB case. Not to mention, it includes 2 dust filters for FREE!- Matte coat finish gives the case an illusion that it's a high end product.- Airflow is sick. You can install up to 5 fans, and I do just that with Noctua fans.They come with 1 Phanteks pre-installed upfront. Though, I move it to the back to install 4 more Noctua for stronger airflow.You cannot hear a thing even on high workload with heavy graphic games.- It is roomy inside the case. My graphic card is a dual-fan Radeon RX 580. But there's still room to maneuver and add some decorations.- They include 2 brackets for SSD. Huge for future upgrades!- HDD can be installed when you take off the front panel. Super convenient.#Cons:- Cable management is bad compared to the 400X. It's a bit jammed.- There's no reset button. You can hold the power button for few seconds for a hard reset.- 3-pin RGB slot. It's odd since motherboard market offers 4-pin and 5-pin a lot.- Light streaks give you a taste of RGB. You'll become a RGB hoe.The case is 11/10 for the price, value, and functionality. Would buy again in a heartbeat. Would recommend this brand over the big guys.

This is the best case I have ever built a PC in. I had been stuck with an almost 10 year old build and decided it was finally time for an upgrade. I was looking for a more compact and attractive case than the one I had. This fit the bill nicely and didn't break the bank either. Everything was easily accessible and well engineered. The front panel pops off with no tools to easily access the lower 2 toolless HDD bays. The whole case is toolless using thumb screws. The interior has plenty of space for up to an extended ATX motherboard. I was even able to cram my large non-modular 850 watt Corsair power supply in the bottom with plenty of room for the unused cables.The lighting looks great too and is easily controlled with 2 buttons on top of the case, or using a 5v addressable motherboard header. The only downside is that this case comes with only one 3 pin, non-pwm 120mm fan. The fan in my case was defective and making a loud buzzing sound. I emailed Phanteks and they had a replacement in the mail within a few days. They have excellent customer service. I also purchased an inexpensive 3 pack of 120mm PWM fans from Amazon. They installed easily into the case and are super quiet.I am very pleased with this case. For Phanteks' lowest budget case it exudes quality and well thought out engineering.

Producto de Excelente Calidad!....Laminado de Acero de Alta Resistencia con Acabado Correctos y Justos....Nivel de Alto Flujo de Aire Frontal y Superior....Muy Buena Calidad del Panel de Cristal Templado,con Gran Espacio Para Una Buena y Completa Gerstion de Cables....Buen Sistema de Iluminacion de RGB,Aunque Carece de Mas Modos de Iluminacion,Este Gabinete Cumple Perfectamente con Los Standares Ideales para Un Buen Ensamble y Setup Gamming...100% Recomendable por Calidad,Precio y Producto Final...Saludos Ing. Marcelo Bruno.

La caja es espaciosa sin ser gigante. Tiene muchas opciones para gestión de cableado y filtros anti polvo en todas las entradas de aire. Ten en cuenta que las luces RGB llevan un conector de 3 pines, no de 4. Muy buen producto.

The media could not be loaded.  The five star reviews here do not lie. This case is absolutely incredible.When it first came out of the box, I audibly gasped. Even without the RGB lights on, the case is sleek, clean, and gorgeous. It’s solid and sturdy, made with quality material. Not tinny in any way, and the tempered glass is a sophisticated touch.For my first PC build, this case was a dream to work with. The cable management behind the right panel made things so incredibly easy and clean; I only had to use one zip tie! There is, indeed, only one fan installed as an intake on the front, but I moved it instead to the rear exhaust and it works quietly. It fit my ATX mobo and CPU cooler (Hyper212 LED, 1cm clearance) perfectly, and the tempered glass side is so gorgeous and shows off the inside components elegantly.And I can’t say enough about the RGB lights on this case. I’ve seen other cases online that are RGB, but they’re either overpriced ($200+) or so gaudy and blinding. The cascading lights are clean, minimalistic, and mesmerizing. It has the option to turn them off too if they get too distracting, but they aren’t too bright at all and I can’t see myself turning them off anytime soon. The video I’ve included doesn’t really do justice for its beauty.Just a note: the accessories and manual are in a cardboard box in a HDD slot, behind the front cover. Took me a while to find it, so hopefully the curious shopper skimming through reviews will remember this if/when they purchase this case. A good variety of screws and even a few zipties included, too.All in all, I passionately recommend this case to anybody looking for a case for their new (or old) gaming build. This case is worth more than it sells for, and it will fulfill needs you didn’t know you had.

Excelente producto

Jolie tour, un peu à l'étroit au niveau de l'alimentation mais ce n'est qu'un détail.