Low Shank 11 Piece Snap-on Foot kit

I ordered this as an impulse buy and I'm REALLY glad that I did. The day before this arrived I dropped my button foot on the floor and ran over and broke it with my chair. The one included in this set is identical to the one that came with my Brother SE400 except that it is not marked with an "M" (no worries). The "Over the Edge" or "Overcast" foot is also identical as what came from Brother -except it is not marked with a "G" (again, no worries). All the feet seem quality- I've used all but the seam guide and the low shank ankle adapter. All have worked great. My 3 Cord foot (I've been wanting one) is not misaligned as one reviewer stated theirs was. The button hole attachment is manual - I guess. I like the "Blind Hem" foot included with this set better as it is adjustable in width. The Blind Hem foot included with my machine is not adjustable. I also liked the Rolled Hem foot. I've been wanting to try one. So, yes...I am very PLEASED with this set. The shipping was very fast. This shipped directly from the seller on the same day that I ordered and I received it 3 days later. Funny, considering that Amazon has still not shipped the rest of my order 5 days later. LOLI don't understand the complaining about no directions etc. It's not very hard to Google and match up the feet to what is included. And as to directions to how to use the feet - try You Tube or your machine book. It's just not a big deal. The two feet that I have bought directly from Brother DID NOT include directions on how to use them. With shipping this entire set was less than $10 so even if you just need one foot - I don't see how you can go wrong.

This seems a pretty good value set, getting multiple feet for the price of one brand-name foot. The only "problem" I had at first was that the feet do not snap onto the ankle of my Singer 5417C. The horizontal bar is just a little too small diameter. However, there is a snap-on ankle provided which is the correct one to snap on to all the feet in this kit, you just have to unscrew and remove the standard singer ankle and install this one instead. This ankle will also allow you to use other cheap specialty presser feet with the narrower bar :)However this means you can't quickly switch out the regular Singer feet; I was only using one of the new feet but needed to switch out my Singer feet. So I managed to fix this by threading and wrapping a short length of 1/4-inch width plastic tape around the narrower snap-on bar of the required presser foot, until it was sufficient to snap on and stay on to the standard Singer ankle.The feet that look like metal are all metal. (Mentioned because I've sometimes gotten parts that look like metal but are actually chromed plastic). Overall, a good deal if you want to try out some new specialty feet like the rolled hem & blind hem without spending too much, or if you need replacements or spares for your standard feet.

This is a great deal for snap on low shank feet. However, I specially bought this for the zipper foot as shown in the picture which is a narrow foot with one snap on location. The kit delivered to me DOES NOT have the zipper foot pictured. Instead, it has the more common zipper foot that is a bit wider and that has L and R snap on locations, which is already the standard zipper foot that came with my Brother machine. While this zipper foot is fine, it doesn't allow for very close seams and cording/piping work the way a narrow zipper foot does and is not the zipper foot in the sales picture. I might keep the kit anyway, because the blind hem foot is different than I already had and the price for the kit is so cheap that it's not really worth sending back, but be warned my kit was not delivered with the zipper foot that was pictured. Now I'm going to have to buy the narrow zipper foot separately.

The package arrived well before the due date, & was in good condition. I can't be sure b/c I haven't tried them all, but they seem to fit my Brother machine perfectly. They're also slightly bigger than the feet that came with my machine. That should give me just a little more control when doing a rolled hem, etc. They seem to be of comparable quality, too.Just one downside, there were no instructions, & I had to do a bit of homework identifying each foot. I didn't mind,I'd rather watch a video demo than try to decipher written instructions, anyway.Although they specifically say they may not send exactly what's pictured, I received everything as shown. I was a little confused at first because I expected the buttonhole foot to be the type that's spring loaded, & automatically senses the button size...Initially, I thought it was broken or missing pieces. It's a plain, manual type, which is more than fine given the price for all the feet included in the set. I contacted the seller before I figured out I was wrong. They responded within an hour, & offered to send a new one. I admitted I'm an idiot, & told them not to bother :). I would definitely order from this seller again!

I lost the buttonhole presser foot for my sewing machine and wanted to buy a replacement. Looking around in stores and online, i could either get it by itself for about $8 or pay $13 for 10 of them. (11 pieces including that hook thing). I have a basic Janome machine and the feet work perfectly. I actually found the foot I was missing today and compared it to the one included. They are pretty much the same thing. I also compared the standard foot that came with the machine to the standard foot in this kit. The only difference I noticed was the original had a "J" engraved on top. These feet are a great value and are comparable to brand name parts.It's true that these just come in a bag with no labels and no instructions. I wouldn't really expect them to since they are just replacement parts. If you need to know which ones are which and what to do with them, there is a ton of info on the internet, or you could take them to your local sewing store and ask someone there for help.Overall, I would definitely buy these again and I am telling all my friends who sew about them.

I've finally been able to use all the fancy modern snap on attachments on my vintage workhorse of a machine. I hated having to unscrew the shank to change feet so I hardly ever used that machine. With this adaptor and the extra feet, I can easily change feet and do specialty seams with both machines without wasting too much time. And they all fit really well.

sastisfaite merci bonne journée

It was what I expected. Perfect for what I needed it for.Thanks

Everything was fine thanks