Carbhub MS170 Carburetor for Stihl MS170 MS180 017 018 Chainsaw with Air Filter Fuel Oil Line Spark Plug, Replaces C1Q-S57 C1Q-S57A C1Q-S57B 1130 120 0603, Stihl MS170 Carburetor

These are good parts for the price. Like others say it runs a bit high on the idle (not an issue) and the fuel line was a bit thicker than the oem hose (not an issue). It worked great. I replaced everything it came with just for the sake of knowing they wouldn't be an issue for a while. I got an MS180C from a guy that put straight gas in it and blew a hole in the piston the size of a quarter so I replaced the block and piston and it wouldn't run right so I bought this Carburetor and it works great again. Not bad for $100 saw.

works great

Installed carb on Stihl MS180 saw. Carb works great. Used the rest of the kit on my 017 saw. The included fuel tube and filter were useful. The included oil pump and oil line repaired the lack of oil to the bar. Removing the handle in order to access the oil pump and oil line was a nightmare due to bad advice on U-Tube. The shop manual for this model saw is available as a free download. I would advise getting the manual before starting work on the saw. This saw sat for at least 15 years after my friend said it was not worth a d***. His widow gave me the saw. The fact that the chain was on backwards might have had an adverse effect on the ability to cut wood.Follow up: The carb was installed on my MS180 saw and works great. The rest of the kit was used on the 017 saw. I had purchased a second carb kit for the 017 That carb had an issue with connecting the throttle linkage. Two saws, two kits caused my confusion about the carburetor.

Works as it should. Only used the carburetor and air filter out of the kit. Saw runs just like new with this replacement.-1 star because the air filter didn't fit quite right and I had to trim off a little bit to get a good fit. Also where the throttle linkage fits innwas slightly off and it kept slipping out of position when i tried to give it throttle. I used pliers and gave just a little bend to it and the linkage no longer pops outThe other pieces in the kit seem like they are fine if needed. Overall satisfied and I would purchase again if I forget to drain the gas again.

perfect for what I needed

Matched up perfectly started on second pull no adjustments necessary. This MS 180 is running like a raped ape now. It was brand new, neighbor only used for a quick start/saw/stop demo, less than 10 minutes run time then put on a shelf in their garage where it sat untouched for over 5 years. Fast forward to "saw won't start for anything" and lots of starter pulling, time and profanities. The cost of the carb rebuild kit vs this whole new carb and other goodies made this purchase an easy choice. At this point I have no need to use the other items included. Less than $20 parts and barely one hour shop time. The "deal" with the neighbors was that if I can get it started then cut a few small trees for them, it would become mine. Add 2 1/2 hours tree cutting time for the neighbors to the cost of part and shop time and I'm as pleased with the saw deal as I am with the purchase of the carb kit. EASY FIX thanks to this item!

I need a replacement carb for my chainsaw , i ordered this one and installed it works great 5 Star

Thanks