TAKIMO 68OZ 3×UV Resistant Resin Kit,No Bubble & Crystal Clear Epoxy Resin for Coating, Casting, Table Top,DIY, Bar Top, River Tables, Resin Art, Wood with High Gloss Finish

Easy to use, need to be fast and learn the technique of eliminating the bubbles. Bubbles will occur despite everything .

Love the resin. It’s easy to mix and dries well. I’d buy it again. Not sure why but there was a small hole in the top of the part A bottle. Otherwise, this is an awesome product. Great resin.

more expensive than most epoxy combos we would get in Singapore. Works the same as the super cheap ones that are on shopee or the like. disappointed.

I have used a different brand in the past. And this resin is so good stuff. It is a 1 to 1 mixture and is forgiving if you don't have it perfect. I see no hardness difference when the mixture is less the perfect. Sets up in the same time everytime. Looks great when used as a counter top finish if you want to try a marble look over a old counter top. You should try to watch some videos before you try this. I used it on floor tiles, counter tops a bathtub and toilet. But on the bathtub I did use a top coat of the Ultimate top coat from stone coat counter tops. Is great for mixing color pigment liquid and powders. all and all I give this 5 stars for ease of use and being forgiving on the 1 to 1 mixture being less then perfect with perfect results everytime.

Its extremely simple to use. As they say, mix by volume and there is no issues. I was a little casual about the measurements myself, and about the mixing, but everything dried perfectly fine. It mixes a little cloudy because of the air bubbles, but dried crystal clear with no bubbles. Looks perfect. I covered a painted composite cardboard bowl (inside and out) in several thin layers of the product. Leaving a day between each application. The bowl feels completely cured, but I will give it a full 7 days before using for decoration. Honestly can't believe anyone is having issues with this.

I’m really happy with this resin! I’ve tried quite a few over the past decade, and it’s definitely one of the better ones. If someone says it doesn’t cure, it’s probably because they’re not using it correctly, not the resin itself. It’s spot on! It takes about 8 hours to de-mold, and it’s fully hard at 24 hours. Also, if you’re hearing that it doesn’t mix well, just remember that the bottle says to mix it by volume (which means measuring it out by ounce, liter, or cup!). Not on a scale! It won’t mix properly, and it will be tacky. Also, be precise because why not? Why waste your time and money? I made some cubes of different sizes for displaying my rock specimens, and they turned out beautifully. I haven’t tried mixing this resin with any medium yet, but I’m confident it will turn out just as beautiful! No streaks, no bubbles! It’s super crystal clear, just like it says. I did use a pressure pot to test this, and it definitely ensures no bubbles. Before I even put them in the pot, they were almost clear on their own (I did use a heat gun to pop bubbles that surfaced a few times) I believe that if you mix this resin properly and slowly, it will cure like glass, even without a pressure pot. But if you’re a serious artist, just invest in one—they’re compact and affordable these days. Buy this resin and follow the instructions. You’ll be pleased! And don’t forget to enjoy yourself, Art isn’t Art if your not having fun while doing it 😉