High Yield Compatible Panasonic KX-FAT461/ KX-FAT88 Toner Refill Kit for Panasonic KX-FLM661, KX-MB2030, KX-MB3020, KX-FP205, KX-FP215, KX-MB2010, KX-MB2000, KX-FL511, KX-FL421, KX-FLM671 (3,500 pages)

I bought this because I am...A. Cheap as hellB. A do-it-yourself kinda guyI have a KX-MB2000 laser printer, and it was complaining that my toner was low. I bought this, took the toner cartridge outside, put it on a plastic table on my porch, and refilled it myself. The instructions are pretty clear, and NE IMAGE even gave me a free pair of latex gloves to do it with (I was impressed). The cartridge for the KX-MB2000 couldn't be easier to fill. It took about 15 minutes from pulling it out of the printer to putting it back in, and this was my first time trying it. Saved myself about 50$! Honestly, anyone could do this. It requires absolutely no tools, except something to cut the bottle open with.

Tired of getting ripped off on new cartridges? Fill your own with this cheap alternative. Prompt shipping. A couple of warnings: its a somewhat messy business. Not bad, but do it somewhere where you can easily wipe up any black ink dust, not on the couch or the white carpet. Also, ideally use a mask over your nose and mouth. The toner is very fine particulate matter that most agree is not good to breathe in. I would probably do it in a plastic bag next time. Don't be scared away . . . it's a piece of cake to do, but my observations will make it that much easier.

Much cheaper than buying a new toner (or even the rebuilt one of dubious quality). I refilled the factory toner and it seems to be printing fine. Hardest part was to try and not make too much of a mess (the toner really likes going airborne in a fine black mist if you pour it in too fast)

Initial prints were good, but print quality quickly went downhill. As others may have mentioned, toner is too fine. So much excess toner was accumulating under the fusor it actually caused blank streaks on the printout (by blocking the laser light). There was also smearing/darkening on other parts of the page. Tried reconditioning the drum assembly and poured in the rest of the toner (having dumped out what was in the drum). Got a few more clean prints, but the problems recurred almost immediately. Not sure if my fusor can be reconditioned at this point... painful lesson!

Bought this just to see it the output would be comparable to original toner, or at the least not suck. I rally can't spot any difference in the printouts, especially on plain text. It's a bit messy, but not so much that it is a real detriment. I'd cut more of the provided nozzle off though, it's easier if it pours rather than squeezing it out. You will need to work over plastic or something that can be tossed or rinsed

It wastes your money, paper, and time! I bought two times these compatible toners for two different printers, and the results were the same - very bad prints! It took/wasted a lot of good OEM toner and paper to "clean up" the compatible toner to give good print. I know the OEM toner is a rip off. But compatible toner is a devil.

Product was as advertised and works great. Very easy to use. It doesn't come with instructions but you simply open the empty cartridge by turning the tab on the side and pour the toner in the cartridge slowly. Then close the cartridge and it's as good as new.

This stuff makes it so much easier to deal with printer ink replacement. So easy to use & a fraction of the cost of a new cartridge. Shipping was fast & it arrived even sooner than estimated.