Octopus nozzle cleaner, print head cleaner compatible for Canon Pixma print heads with hose adapters (500 ml)

Had 3 of the 6 inks in a canon ts8050 not working , nozzle checks and in built head cleaning not improving at all. Tried this product that had good instructions and although the 1st try got one of the inks working again it stopped another, so redid the process again but allowed a period of waiting time with the cleaning fluid just introduced to the nozzle inlets before flushing through Very pleased that this time all inks working fine all blockages removed (as they say patience is a virtue). Total time spent cleaning head from start of !st clean to successful outcome was approx 1.5 hours. Glad I tried this as saved replacing printer.

After cleaning the two blacks head pattern came back perfectly, however you also need tweezers as per user manual which are not added to the kit, so its not an all in one kit. Add it and bump the price a bit!?

Had two blocked print heads. Thought I'd have to buy a whole new print head carriage. This product worked brilliantly and the ink is flowing through again. Very pleased. Loads left over for future use too.

I had a ink feed failure with my Canon G5050 printer, this kit seemed to offer the items required to mend it. The cleaning liquid worked well and was a decent size 500cc, the syring was large and well made with good suction and a pair of rubber gloves and felt pads were included.The instructions gave details of CLI & PCI cartridges with poor photographs showing items not in the kit. None of the supplied tubing fitted the nozzles or inlets to the printheads to give a tight fit to either suck ink through or pass cleaner fluid through the printhead. There are some Youtube videos you need to watch and buy some suitable tubing before purchase.

Worked a treat. I would recommend doing this job outside or in the garage. Wear rubber gloves. Be light handed when pushing the cleaning fluid through the print heads. Have lots of kitchen towel handy!

Actually works very well but obviously can be messy. It proved I had a faulty print head as the renewed clarity showed up a fault

Unblocked stubborn print head, would recommend this product.

It seems to do the job cleaning very nicely BUT I had to stretch the plastic tubes outwards with a tool cause the tubes didn't fit the size of the printhead nozzles (i had a pixma mg8150 - and this product is supposed to work with pixma series in genera). Also keep in mind that you will reach almost half bottle with one scholastic cleaning of one printhead. In my case the cleaning didn't revive the printhead as i guess the problem was more serious (either on head or circuit).

Habe zwei Druckköpfe von Canon und wollte für die Zukunft verhindern, dass eine Neubeschaffung notwendig wird. Also dieses Set gekauft und sogleich getestet. Zuerst erfolgte eine Reinigung der Düsen mittels des Reinigers und einem handelsüblichen Ultraschallgerät (Wichtig - nicht allzu lange laufen lassen, 60 - 90 Sekunden reichen aus). Auch die Kontakte dürfen nicht mit dem Reiniger oder Wasser in Verbindung kommen.Danach die Durchgängigkeit der Düsen geprüft. Restliche Verstopfungen wurden mit Reiniger und den Schläuchen beseitigt. Folge war, dass alle Düsen wieder einwandfrei arbeiteten. Einziger Kritikpunkt für mich ist, dass die Schlauchenden Druckkopfseitig erwärmt werden mussten, damit sie gewaltlos auf den Tinteneinlässen angebracht werden konnten. War aber vollkommen problemlos möglich. Vor der Benutzung sollte unbedingt das Video angesehen werden, die teure Irrtümer vermeiden helfen. Ich kann das Produkt nur empfehlen.

Pas du tout pratique pour le nettoyage de la tête d'impression.Deux tuyaux en plastiques, un gros qui s'adapte difficilement, et le petit qui ne s'adapte pas du tout. Pour ce dernier, j'ai dû passer un tournevis cruciforme et le chauffer légèrement pour élargire l'entrée. Le nettoyage se fait, mais non concluant.Ah oui, je précise qu'il faut retirer les pztits joints en caoutchouc autour des buses de la tête.

Fungerar bra. Använt denna till Canon skrivarhuvud. Lite händig får man vara ang. De medföljande slangarna ev. fixa egna om de inte passar. Bruksanvisningen ok….

Fick fart på ett igenkletat skrivarhuvud

Ayant des soucis d'impression avec ma Canon TS 5050 et, à 76 ans, n'étant pas experte en imprimante, j'ai juste enlevé les cartouches, percé à peine l'opercule du flacon de nettoyeur, et à l'aide de cotons tiges imbibés du produit (1 pour chaque couleur), j'ai bien nettoyé la surface des habitacles. J'ai laissé sécher quelques instants, remis les cartouches à leur place respective et C'est Nickel ! Comme je suis en train de me faire "une petite bibliothèque" sur l'Histoire de l'Art et que j'utilise beaucoup les couleurs, je le referai de temps en temps. Le flacon ayant une bonne contenance, je recommande ce produit!