Muzata120Pack 1/8" Black Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 60 Pairs CK17

These look great, but going into ipe wood posts the wrench bent open. Was pre-drilling with max hole size. That said end product is great and clean look. Use a drill guide or make a perfect jig for drilling holes.

The lag screws themselves are okay. The tool pictured was not what I received. I got a cheap tool that bent and was too long. Spacing the cables 3" apart required repeated hand changes. Had to finish each screw with vise grips.

Cut you cables about 2" short of the distance between post. Put one side in about 4 turns, then back up the opposite side 4 turns, then start it in. Work back & forth side to side to prevent cable from kinking.leave about 3 threads out for future tightens after cable stretches a little. The only problem that I had was with the small tightening wrench they send with the retaining anchors. I broke two of them while screwing the retainers into my post. I suggested that the increase the tool thickness by 50% & maybe two levels of hardness.

All my neighbors are admiring my fence...it's classy... it's almost invisible if you have a view worth not blocking as is mine on the beach overlooking the lake. It was a bunch a work to install, but once I got going, easy. I might have paid thousands for this quality of fence but 38 ft of fence cost me about $800 wood and Muzata hardware included... get the tool... its just part of the cost of the fencing solution. Their swage system is so refined... brilliant.

We were very excited to have the wire deck railing. We ordered the recommended crimping tool, watched the demonstration video and worked 2 days on our large deck. The first few hours went great. Then we started to notice that what we had done was starting to sag. We went back and removed the sagging wires, put new anchors and wire and kept moving. The further we got the less effective the crimper became. It just lost its ability to hole the wire tight. We even order another package thinking we got a bad batch of anchors.These pictures are 2 weeks later. More and more are coming loose and falling out…and we didn’t over tighten, in fact we probably errored on the side of not because they kept coming out.Many hours and a lot of money down the drain. We are now looking at a different type of anchor and will end up replacing the whole thing. Wish we could give this product zero stars. Save yourself money and time and skip this product!