ST501 Double Sided Adhesive Tape, 36 yds Length x 1" Width Paper

Serves many purposes. Good hold. Kinda challenging to peel off backing.

Excellent tape. Holds great

I first got used to using double sided tape while working in the aviation cabinetry world. We used it constantly. Primarily for securing a straight edge while routing a detail, or fine tuning an edge as in fitting a door to fit its opening. I use it all the time for just this kind of work. It's labor saving. The adhesive sticks securely but lets go without marring wood surfaces. Just make sure you press firmly to set it in place. You can trust that it will hold temporarily, but let go.

As another reviewer mentioned, you need to make sure both surfaces are clean and free of sawdust. Seems like a no-brainer, but that task is harder than you'd think when using this in a woodworking shop. Thats said, I gave 4 stars because the room for error is very small. It either sticks well or doesn't really stick at all (although it may fool you into thinking otherwise). There's no real in between. When you're working with a router or CNC machine, the risks of error are already high enough, so it sucks when the tape you thought was good to go detaches and your workpiece is ruined in an instant. On the other hand, I've used a few other doube-side tape options, and none are this good. This tape easily tears with your hands, so you don't have to mess around with scissors or razor blades. It creates a strong bond to a *clean* surface. The backing is easier to remove than most other tapes I've used. Finally, it removes cleanly without leaving residue or harming your workpieces. Overall, I would recommend this tape. As I mentioned, it works very well, but attention must be paid to prepping the surfaces before use.

Works well. Sticks good. Paper backing is easy to remove.

Best double-sided tape. Hands down.

I mostly use this for mounting small, light wood projects on my lathe. I press this on to my project and press this on to the face plate. I always use the tail stock to keep it tight and safe. Finally I use light cuts . I have turned up to 12” light platters and it worked well. If you try to turn heavy or unbalanced wood and really like to gouge in or have a heavy hand: DONT do this. Use screws or a chuck. I usually plane the bottom of the work piece where the tape goes . The tape releases easily if you microwave it for a few seconds. The tape is also great for holding down rugs. Adhesive remover or WD 40 easily removes adhesive.

Thanks for delivering

I've tried many double sided tapes for wood working and this is by far the best. Its worth every penny, if your surface is dust free it can be reused a few times. I can't believe how well it holds, yet I've never had it damage a surface, leave and glue behind and it is easy remove.

I have tried several different brands over the years and glad I stumbled ( the a woodworking review ) this tape. I use this around the perimeter of my templates with a few strips in the field depending on how large the template and it holds with zero issues even on heavy 2" trim cuts. I use a rubber mallet to secure the two pieces together and a heavy gauge scraper to pry them apart leaving no glue residue. It's been over 6 years that I've been using this same ST501 for this application

Timely delivery. The best double-sided tape I have used for building electric guitars. Highly recommended!

Works great, would buy again.

This tape is fantastic. It's very easy to separate and it holds very well. Great for woodworkers