VIVOHeavy Duty Adjustable Under-Desk PC Mount, Computer CPU Holder, Supports up to 66 lbs, MOUNT-PC04A

I bought this Under Desk PC Cage to free up space on my desk, and it’s been fantastic! My desk was getting cluttered with my monitor and other peripherals, and this cage has really helped open things up.The main reason I got this was to save space, and it definitely does the job. I mounted it under my Ikea Karlby desk, and it holds up perfectly. Now I have so much more room on my desk for my monitor, keyboard, and other essentials. It’s an easy way to declutter your workspace without sacrificing functionality.Another great feature is the cable management. The cage keeps everything neatly tucked away and makes it easy to run cables without them hanging over the edge of your desk. If you like a clean, organized setup, this is a must-have.The cage feels solid and secure once installed. It holds my PC without issue, and I don’t worry about it moving or tipping over. It’s definitely built to last.I have hard floors, and it still helps keep my PC off the ground. It would be even more useful if you have carpet or pets, as it’ll protect your PC from dust and debris while keeping it elevated and secure.Overall, I’m really happy with this Under Desk PC Cage. It’s easy to install, does exactly what it promises, and helps tidy up my workspace. If you're looking to clear up desk space and keep your PC off the floor, I highly recommend this product!

I recently purchased the VIVO X-Large Heavy Duty Adjustable Computer CPU Tower Stand, and it has proven to be a fantastic addition to my workspace. Here are some key highlights from my experience:Sturdy and Durable ConstructionThe stand is made of high-grade steel, providing robust support for my computer tower. It can hold up to 66 lbs, which is more than sufficient for my needs. The build quality gives me confidence that my CPU is securely mounted.Adjustable and VersatileThe adjustable frame is one of the standout features. It can accommodate various sizes of PC cases with its 5 height settings (ranging from 17” to 25”) and adjustable width (from 9” to 14”). This flexibility ensures a perfect fit for most CPU towers.Optimal Air Flow and ProtectionThe open-frame design enhances ventilation, which is crucial for maintaining optimal temperature and performance of my PC. Additionally, the thick inner padding prevents any scuffs and scratches, keeping my equipment in pristine condition.Space-Saving DesignMounting my CPU under the desk has significantly freed up floor space, making my workspace more organized and less cluttered. It also protects my CPU from dust and accidental spills, which is a huge plus.Easy InstallationThe installation process was straightforward with minimal assembly required. The instructions were clear, and I had the stand set up in no time.Overall, I am extremely satisfied with the VIVO X-Large Heavy Duty Adjustable Computer CPU Tower Stand. It combines durability, versatility, and practicality, making it a perfect choice for anyone looking to optimize their workspace and protect their valuable equipment.

Most mounting solutions are pretty limited with regard to how large a tower you can mount. This one seems to be one of very few that can handle a mid-tower case, or even larger.Over all, I think it's well designed and well made. There are only a couple of things to complain about.First, it can be somewhat annoying if you need to service your machine (change internal components, clean out dust, that sort of thing). The reason for this is that the small side bracket is held in place using two retention screws, but in order to reach them you need to get your hand between the top of the PC and the mounting plate. This can be done if the PC is lowered a bit, but if you want the space between the top of the PC and the desk to be minimal you can't get your hand in there.The way around this is to lower (and later raise) the main bracket with the PC in the mount when you need to move it. This is doable, but it's not a very good idea since you're dealing with the entire weight of the PC while trying to adjust how long the bracket is. The way I have managed this is by placing a stool under the PC, and using my height-adjustable desk. Basically I raise the desk, place the stool under the bracket, then lower the desk until the stool is bearing the weight of the PC. Then I press in the detents, and raise the desk until the detents snap into the next set of holes. Now it's possible to take the computer out. Once I'm done cleaning the computer, I put it back and press the detents again. Now I lower the desk until the detents pop into the higher holes. While doing this, you have to slightly lean the PC tower away from the foam cushion on the side brace so it doesn't rub against the side.There's a really easy thing that VIVO could do to solve this issue: All they need to do is add a hexagonal section to the screws that a box wrench can slip onto. Then it would be possible to loosen or snug the screws from the side using a wrench which would need much less room to work in.The second issue is that the mount doesn't offer a good way to ensure that your PC is aligned correctly and level. The bottom of the main bracket has a wide bend in it, and you don't want your machine to rub up against this bare metal (you want it supported on the foam pads). But it can be tricky to actually place the case on there such that it isn't touching but also isn't tilted to the side at all. The upper brace is what will actually hold the machine in position, but it's hard to get it set just right so that you aren't pushing the case in either direction.What I would have liked to have seen, would be for the bottom part of the mount to extend a bit further under the PC, and for the entire lower part to have the foam padding all the way around the end and part way up the bottom bends to protect the corner of the case. I would also have liked more foam on the side brace. Then additionally, there should be some plastic and foam/rubber shims along the inside of the upper black tubes that would space the case away from the tubes the correct distance that it won't touch the inside of the lower bends. These shims would also allow you to hold the case against them in order to ensure that it is level, and to ensure that the side brace is actually "clamping" the case against them. This would ensure proper alignment and levelness, plus it would reduce the chances of the case rocking backward/forward as it would be held on both sides.Despite these issues, I think this is currently the best solution for hanging a larger PC under a desk. It's especially perfect for a sit/stand desks, allowing you to avoid a mess of long cables and keep everything much more tidy.

Works as described. The mount adjusted to my Fractal Designs North case, with no real issue. Though, I do wish there was more foam along where the glass panel on my case rests. I feel like the foam that is there won't offer a lot of protection if my knee really takes it out on the case.Inatallation was pretty straightforward, though I think I opted for my own hardware to mount under my desk. Size was spot on and an easy fit. Seems like a reasonably durable option with a solid value for the dollar.