F2 Master Mini Cordless Rotary Tool Kit, NeoPulse Motor, 5 Speed, 25000 RPM, Revostor Hub, 35 Accessories, Engraving Pen, for 3D Printer Sanding, Polishing, Drilling, Carving, DIY Crafts

I’m writing this review after having this tool for about a month. I find this to be the best tool that I bought for my 3-D sculpting business. I make marble looking statues and this allows me to get in and clean up small areas underneath animal bellies, and under peoples arms that kind of stuff. It is amazing and it’s super lightweight. Easy to control easy to use. I’m very happy with my purchase. I use it on pretty much every print that I plan on selling.

Are you kidding me? I never write product reviews but this product, are you kidding me? The best piece of design and engineering that I have ever seen. These people should be working for me. This is a beautiful piece and so functional. i’m a technologist and heavily into 3-D printing. This is the best product. A must have.

Using this thing makes me feel like Harry Potter if he swapped his wand for a rotary tool. I mainly use it for finishing and detailing my 3D prints, and it has completely changed the final result. What used to look just okay now looks polished and intentional, like something I’m actually proud to put on a shelf. The tool selection is great. There’s a bit for sanding, polishing, carving, and drilling, and they’re easy to swap out. I especially like being able to adjust the speed depending on what I’m working on. Lower speeds for fine detail and higher speeds when I need to clean things up quickly. That control makes a big difference on printed parts. Battery life has been solid so far. I can get through multiple projects without needing to recharge, and it holds power consistently instead of fading halfway through a job. Ergonomics are also a win. It’s comfortable to hold, well balanced, and doesn’t feel awkward even during longer sessions. Overall, this tool took my prints from “this is fine” to “wow, this actually looks finished.” If you do any kind of 3D printing, crafting, or detailed hobby work, this feels like one of those tools you didn’t know you needed until you used it.

This is not a Dremel, let's get this out of the way first. If you go into buying this thinking it's going to be a Dremel replacement you will be sad. This is a good engraving tool and tool to carve for a little while. It's pretty low torque. So you aren't going to be able to grind the rust off your car with it, but you can buff and polish a model car. It's a light weight engraving tool with enough power to carve into plastic, soft metals, and wood and it'll do that for a moderate period of time. I'm using mine for carving into plastic, wood, and aluminum for printing. It does the job I need. The speeds available give me good control but if you are accustomed to Dremel speed, it feels slower than my Dremel. I'm not trying to work super fast with this so this works for me. It feels okay in terms of durability but I don't know about the bits, they feel like they aren't as durable as dremel bits, but I'll find out more over time. One good thing is that changing out bits is VERY easy and fast. It uses two grippy knurled nuts at the attachment point. I did find that in some cases this didn't grip the bits quite strong enough and some wandered out as I worked. The bits can also loosen during use. Annoyingly this means shutting the whole thing down as it doesn't cycle through 0 when you cycle through the speeds. So every time I go to change a bit or tighten a bit I have to turn it off and it has to cycle through the set up cycle- this is pretty annoying. Swapping out collets is easy as changing a bit. Value wise... I like the number of bits it arrives with , it can't use all bits so look close at any replacements you buy. There are 2 collets included which opens up use of other bits. It uses old style wheel attachments which work but are also not as secure and easy to use as the new Dremel locking style. Overall I like this for what it is- a light weight easy to use hobbyist engraving tool that can handle some light carving.

The kit is really very well designed. It is compact and well organized. Very useful for the smaller lighter jobs, whether it be cleaning up parts from a 3D print, grinding sharp edges on a watch band, or drilling small holes. The pencil-like size is very handy and manouverable, very different from other larger tools, so it certainly sits in a nice space in my set of rotary tools. The anodized case, and the rotary magnetic compartment for the bits, works surprisingly well.

Preface: I got this tool on a sale and using a discount code from a sponsored Youtube creator, so that obviously may affect biases in the review, however the tool is still quite good. I needed a new rotary tool as my old one is having issues with its power delivery or motor failing, and happened to see this one sponsored in a Youtube video, thought maybe it was kind of gimmicky, but to hell with it, I need a new one. But to my absolute surprise, this thing is an amazing compact rotary tool kit. I work with small electronics projects and some sculpture art type stuff, and having a tool this robust and with storage this compact is fantastic. I use a type of cheap IKEA rolling drawers as a tool chest for my computer and hobby tools, and most rotary tool kits I've seen, their cases and such can't fit the height clearance, but this can very easily laid sideways. I LOVE the little ring light at the front of the tool as well, I didn't even notice it had it when I ordered it! The sturdy aluminum construction also feels great to handle and work with. I don't know how well it'd work on anything too sturdy since the design obviously means there's a limit to the motor's size.

Im getting old. I build plastic model kits. .y fingers ret fire and stiff easier than they used to. Was looking got a way to automate the process of at least bring a power tool in to do most of the work This device seems to hit the bill. The device is about as fat as a Sharpie, comes right sn array of bits to go different jobs and is packed in a clever case design. You can charge the device right USB c in the case.

The good- the design. How its compact, how the bits are stored, mostly, and ease of use. Pretty nifty pressing something and the tool pops up , makes you feel high tech . Its perfect for smaller lightweight grinding and whatnot. I use it for 3d print clean up. Where it could use improvement **They may have done this on other models I don't know. -Bit access/ease of getting bits out of the holder. - While it is a great storage solve, there is no clear way to get the bits in and out, unless your using tweezers or just pushing on it or whatever (you need to use it to understand what that means), unless I'm missing something. I was surprised because of the way the toll itself pops out I figured that getting bits would be similar, it not. Collet issues- The diameter of the collet where you insert the tooling is tiny, Its a "twist to tighten" ideah like a drill chuck, but the two of the wheels are small, i said that, but also they come lose easily when working with it which causes the bit to just fall out after some rattling. I was cleaning out a hole on a 3d printed part, a deeper hole .2" diam, and wanted to just clean up the tube, the bit fell out of it a few times, it shouldn't have, but it may not ha been the collet, it could have been the fact its rally hard to get it to tighten around the it? , Adding a stop button on the rotation would really clean that up, or making the diameter of the collet itself bigger , meaning the knobs that have to be twisted. Power Button location- while i like the fact that you need to switch the device on and then power it up, it is counter intuitive and border line dangerous to have the power button at the opposite end as the tooling. A major oversite in design, but not the end of the world It could cut you easily if you need to shut it off or are a little careless when doing so because you need to flip the tool around to use it after both powering it on and after use. , or it could cut your project or whatever, - Having the power button on the tool end where you could quickly shut it off , would be better and safer, not that i think this could do serious damage to you, with the right tool head, i think you could be cut enough. are these deal breakers? NO. i will most likely retro fit it with 3d printed parts to make the coller bigger and make a stand, it's still a quality tool and feels good int he hands- it has its place. I would just do some remodeling to the layout and call it a day. Good job guys I love the design, your brand has made a good name for itself.

Très bon produit, léger et maniable. Large choix d’outils. Seule bémol, pas de témoin de charge. On est prévenu seulement au moment où il n’a plus de batterie. Pas moyen de le vérifier avant.

Will come in handy. Has a good about of different pieces nice and compact, usb c charging should workout well for my needs.

Bellissimo, piccolo, maneggevole, buona coppia, che dire stra soddisfatto... Ho provato ad incidere dei bicchieri e sono venuti benissimo. Anche mio figlio si e divertito, ora abbiamo tutti i bicchieri da caffè disegnati 😬😂 Poi e comodo perché lo puoi portare in giro magari per scolpire dei legni o delle pietre. La batteria, non saprei che dire, l ho caricato quando mi e arrivato, con le robe che ho fatto non si e ancora scaricato, quindi direi ottima

Das Fanttik F2 Master hat mich positiv überrascht. Trotz seiner kompakten Größe bietet das Multifunktionswerkzeug erstaunlich viel Leistung und eignet sich hervorragend für 3D-Druck-Nachbearbeitung, Gravieren, Schleifen, Polieren, Bohren und feine Bastelarbeiten. Der NeoPulse-Motor läuft ruhig und kraftvoll, und die 5 Geschwindigkeitsstufen ermöglichen eine präzise Anpassung an verschiedene Materialien und Anwendungen. Mit bis zu 25.000 U/min steht ausreichend Leistung für detailreiche Arbeiten zur Verfügung. Besonders praktisch sind die 35 mitgelieferten Zubehörteile, sodass man direkt loslegen kann. Der Akku hält erfreulich lange durch, und das Werkzeug liegt dank seines geringen Gewichts sehr angenehm in der Hand. Für die Nachbearbeitung von 3D-Drucken, das Entgraten von PETG- oder PLA-Teilen sowie kleinere Modellbau- und Elektronikprojekte ist das Gerät ideal geeignet. Fazit: Ein hochwertiges, vielseitiges und leistungsstarkes Akku-Multifunktionswerkzeug mit umfangreichem Zubehör. Perfekt für Maker, Modellbauer, 3D-Druck-Enthusiasten und Heimwerker. Klare Kaufempfehlung!

これは素晴らしい。 今まで、Doremelのルーター（有線タイプ）でなんでも使ってましたが、ケースは巨大だし、設置も面倒でした。 しかし、Fanttikの充電式ルーターを買って、世界が変わりました。力はもちろん有線AC電源に比べると落ちます。しかしそれでも十分な仕事はいくらでもあります。工具においては、大は小を兼ねないないと実感しています。手軽です。回転精度は問題ないです。 丁寧な日本語マニュアルが付属しています。収納が楽できちんとしています。ビットが行方不明になることがなくなりました。モーターがブラシレスなのも気に入っています（ドレメルはブラシタイプなので保守が必要です）。なお、ビットの径は2.4mm固定なのでご注意ください。