ECOVACS Goat A3000 LiDAR Robot Lawn Mower, Dual-LiDAR Navigation,Suitable for 3/4 Acre, 13” Cutting Width, 45min Fast Charging, Precise Edge Mowing, Smart Lawn Mower for Large Garden

It's been 3 weeks since I took delivery, and I've run it nearly every 3 days just to keep the grass consistent. After over a year of deliberation and research (and getting the grass to grow after a new build), it was time to buy a robot mower. I looked at every robot mower I could find and even watched over the last year as more than one startup failed. Even today, I wonder if the market has "settled", and I think there may still be more robot mower companies than will survive over the next few years, but I am hopeful that ECOVAC is in for the long haul. ECOVAC has a few mower sizes, but for my sized yard the A3000 and the A2500 were the contenders. I opted for the A3000 to avoid the need for the RTK base station or the need to locate the base station where it would be ensured to get the satellites needed – There just wasn't a good out-of-the-way spot with a good sky view and easy access to power (in spite of the generously long power cables). Our lot is a little over one-half acre and flat to gentle slope, and for the purposes of mowing, broken into four areas (see map picture). The front has a narrow strip on the west side that runs alongside the driveway and garage, up to a gate to the back. This gently slopes to the street, but part of it is a cliff to the neighbor’s yard, bordered with a concrete surface about 1 ft wide. The larger part of the front yard is gently sloping to the street with what is effectively a no-curb transition to the street and wraps around the house on the east side. Alongside the house is another gate from front to the backyard, which is fully fenced in. The fourth area is behind the backyard where the city has a large utility right-of-way, which is adjacent to another street. Unlike the front yard, the stretch of yard along this street is about 18-inche wide and about an 18-inch steep drop to the street. Key factors I considered included: lot size – cutting time, 2/4 wheel / tracks, cutting blade type, RTK antenna vs none, other online reviews, and absolutely no perimeter ‘wire’. Out of the box experience ========================= I don't have much to say about the grand opening of a packaging box. From my side, I see no need to praise a super fancy “experience” box that you throw away. That said, everything was well packed and came out easily – even w/o paying attention to the instructions. Assembly was easy as most things were completely obvious, and I only reviewed the guide to ensure I did not miss any important steps. Locating the Docking Station ============================ I had a couple of preferred places to choose from, one with a very convenient electric outlet, but crowding a walkway, and another that wasn't in a walkway but without convenient power. I chose the latter as the walkway is used a lot. And the long power cord (on each side of the power brick) was generously long – so much of it coiled up. The place I chose puts the dock on a concrete pad (so the stakes used to drill into the ground to hold it in place could not be used). I actually haven't done anything yet (after 3 weeks) – but have thought about laying down a bead of silicon caulking to stick the docking station down (see picture). The other aspect about the chosen location – it might not conform to the guide for the open space on 3 sides. But as I've watched it work its docking magic, it always succeeds. Mapping each Area ================= I started with the auto-mapping option. In the fully fenced in area, it might have succeeded just fine, but the grass was quite tall. I had ignored the instructions recommending mapping after mowing the old-fashioned way, which would give the mower a better view of the terrain. With the tall grass, it occasionally wanted to take a diversion around one spot or another. I did try some manual intervention to back it to correct it, but in the end, I just mapped it all manually and I think I came out with a better map. And with three areas that had no clear boundary with the neighbor’s yard, I think I made the right call. The area behind the backyard fence was the next challenge, and I'll admit, I struggled here for a couple of reasons. Taking the second challenge first – setting up a path to this area was a struggle. I guess I didn't practice the path procedure enough to have it work well for me. Back to the first challenge, my concern was about how busy this street is. The steepest part of my yard is also the last stretch alongside the street. I wanted to manually map above that roll-off area (aka 'small cliff') so the mower wouldn't find itself playing frogger in the traffic. I'll just run the weed whacker on that edge from time to time, as grass doesn't even grow there very well. Even my walk-behind often tried to tip over on that edge. There was one other problem – after I mapped the backyard, and the area behind the fence, the app "joined" those two areas. But I wanted them kept separate. I added a boundary where the fence was, but that didn't seem to convince the app that these were two areas, so I added a second boundary nudged over just a tiny bit and then called the narrow strip down the middle a no-go zone. The vision system would have kept it from hitting the fence anyway – so really this was a small inconvenience in the mapping. Mowing Performance ================== But what about the mowing performance? I can say it is doing great! I mentioned the grass was quite tall to begin with and even setting it up to the maximum height, it was still "work". The main area of the backyard required a charge cycle about 1/2 way through it, and because the grass was so tall, it left wind rows. I changed the mowing direction and immediately ran it again, and that helped, knocking down the wind rows. But after the first week of keeping the grass at a shorter height, running it every few days, all evidence of that is gone, and it is doing a fine job. Even the area behind the fence is working well. The first few times I worried about it – so parked a lawn chair where I could just sit back and watch. Cars whizzing by as it drives toward the street, turning where I put the manual boundary. I've begun to trust it well enough to not have to sit and watch. But it does make some odd turns, like it is unsure which way to go – and this isn't so comfortable to watch – and hoping it doesn’t make a bad move and end in the street. Once I got the lawn under control, it mows the full backyard in a single charge. And it mows the two areas in the front on a single charge. I have to open the gate for it to get outside the backyard, and I've usually better things to do that wait on it, so I generally just mow one area at a time, manually starting it. With this usage pattern, it always gets a chance to top off its charge. When it is mowing alongside the fence, it does a great job of hugging it pretty close, dodging out just a hair to swing around each fence post and then tucking back in along the panel sections. Connectivity ============ Some have expressed challenges with Wi-Fi connectivity, but for me, it has surpassed my expectation. My signal isn't very strong at the extremes of my yard, and yet when sitting in the house, I not only see it moving on the phone-app map, but I can pull the video stream too, and it comes out quite clean – until just after dusk when it is quite grainy – but I easily forgive that. I didn't expect that much reach, and that's in all directions around the house, yard, and fence. Cleanup ======= I don't have much to say about this, it is water resistant, and I've hit it with a garden hose both topside and bottom side to keep it clean. With two dogs, the wheels needed a bit of additional attention - but all in all it was easy to clean. What could it do better? ======================== I'd like it to drive into the corners better. It cuts the corners, perhaps so it doesn't have to back up. And some of the corners are not really corners – like a couple of areas bounded on three sides: a fence, the house, and a window well, or another spot between two window wells. Each is an area large enough for it to easily go into, if it backed out. I hope a future firmware update will give it that capability. And in two other corners, one is a 90-degree corner, and the other is even sharper – again if it could go into the corner and back out before making the turn that would reduce the trimming on my part. I'd also like to see it do a better job alongside the patio pavement. In the videos it will overlap the driveway and grass, and that is basically what I want here. But I haven't figured out how to convince it to do so, so it leaves a narrow grass strip. I'd like to see it improve in some turning actions. It is kind of like an indecision when making a 180 turn (see the video). Most of the time it does this well, just a simple turn to run the other direction on the next track. But there are times when it just doesn't seem to know which way to turn, so it turns partway one way and then spins the other way before it figures out how to finish the turn. When that's alongside the street, especially the busy street, it is a bit disconcerting. I'd really like it to make those turns more consistently. Straight lines are quite good, but it's like it 'drifted' a little over several days. Lines that were pretty much perfectly parallel to a fence were later on a few degrees off. The lines were still straight and parallel, so I'm confused on that. I did check how I had it set – and only to change directions weekly and not with any fractional angle. I would like more flexibility in the direction – sure, I can pick just about any direction, but there's two settings I'd like to change – one is in the area alongside the busy street, I'd like to set it to always mow that area parallel to the street – it won't worry me (or passing drivers) so much like when it headed straight for the street. And two, I'd like it to change directions more often than weekly. If each area could have independent settings for direction, change in direction, and how frequently, I think that would take care of this want. Automated gate opening/closing would be a great feature. I also recognize the difficulty of that with different gate styles, sizes, weights, and more. And of prime importance, it cannot let the dogs out. An alternative, in my case, would be automated garage door opening – I have an electric garage door at the front and the back and there’s a clear path between the two. This would have the convenience of the mower dock being in the garage (out of weather etc) and it would take the path it needed. But this doesn’t solve the escaping dog problem. Summary ======= It's only been three weeks since the A3000 appeared at my doorstep, but in that time it has performed very well. I'd say it has exceeded my expectation. This growing season is winding down, so it won't have too many more weeks before I move it into the garage for the winter. I'll need to read about the best practice for winter storage (in the garage, unplugged, ok, or does it need to be plugged in to keep the battery warm and healthy, and since I didn't stake the dock, will I have to map again next spring). I also didn’t get the garage, but I’m thinking of picking one up over the winter. The bottom line – This is a premium mower, but that comes at a premium price. I’ve been watching the market for well over a year, and while I have had only a brief hands-on with one other brand, I’ve read about them all, watched numerous videos, evaluated their yards vs mine, and ultimately, I selected the ECOVACS Goat A3000, and I’m happy with that choice. From my side – recommended.

Mower is good enough but lacks 4 wheel drive and slips and gets stuck often. It has several modes of mowing but will not mow across the edges and you will end up with an edge trimmer in your garage. Inspire of cameras and lidar it falls off the curb at same spot every time. So it is not learning. I enabled data sharing feature expecting them to improve the model but no, nothing happened. After 1 year of use, the battery is depleted and I could not find a replacement battery anywhere. Some how it started degrading right after the warranty period. I did not see many updates to the firmware either. There are better companies with good customer support than these guys. STAY AWAY!

I own 2 3000 LIDAR Goats and my experience has been very positive. After mapping they have never lost their way. I have a square flat lawn that borders the street (no sidewalk) and was always concerned it would wander into the street into traffic. During the final edge mow of the perimeter it slowly creeps along and always follows the borders that were mapped. Customer service is always been prompt and courteous, and was surprised/impressed when they offered a free replacement battery! I always tip it up and use a leaf blower to clean the underside and remove any grass from the pivot points of the blade and bring it indoors after mowing and expect a long reliable life. For me it was a great investment.... take time to understand it operation and limitations.. for me it was everything I expected and would recommend.. Note: no experience with complicated lawn/borders/obstacle's

I've used this Ecovacs Goat A3000 lidar mower since 8/2025 (I previously used Husqvarna 430x boundary wire mower for 5 years ish). So my experience is from Husqvarna to Ecovacs. Overall the Ecovacs does cut with a fast or slow speed and varying height function and if you have a flat yard with tree cover this might be a good option. Good: 1. No boundary wire is the best thing ever. 2. The map is easy to make and edit zones and if you like a striped yard it's good. 3. Easy to set up in general. 4. The camera to watch where it's mowing is great. My old boundary wire Husqvarna didn't have that. Not good: 1. The camera thinking every stray tall dandelion or piece of grass is an obstacle so it mows around each one. I've watched it maneuver around each piece it thinks is a obstacle even with the enhanced setting on (so it should just ignore anything under 9.8inches) and AI recognition off. 2. It won't just edge specific zones. I'm told from the manufacturer it doesn't have that capability. 3. When it gets stuck it doesn't give you a location of where on the map it is and if you have a large yard it's pretty annoying to have to go hunting. No, the camera doesn't work when it's stuck so you can't use that to try to narrow down the location. Also when it gets stuck, the app tells you how to get it going again but it's never worked for me (is this a user intelligence issue... possibly) I have to turn the mower off then back on to get it running again which means I have to manually drive it back to the charging station so it can figure out where it is. 4. No random option for the cut pattern. I'm not a fan of the striped yard look. I prefer my yard to look like a carpet of green and really miss the random cut of my Husqvarna. 5. App is very basic and not particularly helpful for problem solving. 6. Display on mower is fairly useless other than to input a pin.

I dont usually write reviews about products. I am writing one for this because I want people to know what they're buying. Long story short if you're looking to by a robot lawn mower and money is no problem this is the best one. Hands down. Make sure you get the A3000 Lidar as I have heard different opinions about the RTK navigation. From my perspective I love this thing. Its way smarter than a robot vacuum for example. However its still a robot. I am not giving it 5 stars because there are still some bugs to be worked out. I find that if there are steep hills in your yard it can do okay to a point. But I've had it slide down several. It can climb them okay but slides down when traveling down them. I've even had times when it gets itself unstuck on its own. But not every time. There are ways to map out these areas as no go zones but if the hills are on the edge of a pre defined area then it tends to ignore that no go zone due to the true edge technology. But that could fixed in a later update. However I do love this product. It saves me so much time and energy. All the neighbors love it too. I get a lot of people coming over to ask about it. Its very different to me that the lawn gets mowed every other day and doesn't even need to be bagged. I am not a huge fan of leaving the grass on the lawn after being cut but if you run this enough its not an issue. I did learn that this mower will pull thatch out of the yard as well. So if youre like me and dont like the grass sitting on top after being cut or lines of cut grass than be sure to detatch your yard. I was so eager to run this when I first got it that I ran it after 6 days of not mowing my yard. It handled the length fine by of course left lines of uncut grass which I had to go back later and pickup. So be sure to mow your yard and bag it first then you can start running this. Its a big change to get a robot mower but I am happy I did at the end of the day. Its so entertaining to just watch it go. But also nice when Im working and just let it run.

I bought the 3000 in the spring of 2025 (non-weed wacker thing) and used it all summer. I have 15000 sq ft, with some hills. It cut great, and worked pretty good overall. But 30% of the time it would get stuck, or error, for seemingly very little reason, requiring me to go intervene. In the fall, right at the end of the season, the axle broke. Ecovacs sent me out a new unit. I did not bother with it until this spring, March of 2026. Here, June 21, 2026 it has mowed 68 times, for 91 hours, and 336,000 sq ft with ZERO interventions. This guy just mows. I have it on schedules, and don't even pay much attention anymore. Not sure if the first one had a hardware issue, or the new one had better software. Once a week I change the direction, and every 2 months, I change or rotate the blades. The grass always looks fantastic. I like the lines it leaves. It'll miss a blade here and there, but its not really noticeable, and it'll just catch it tomorrow. I do half the lawn Mon and Thur. and the other half Tue and Fri. Those 4 days it runs about 2 hours each. (which also seems much faster than last years unit). The first one, I begrudgingly said I liked it, but maybe not for the high cost/value. This second one though, I love it and definitely would recommend.

Good at first but now essentially worthless. Within 3 months it fails every single mow. Also doesnt keep a charge longer than 20 mins. My yard doesnt have a complicated design or any overhanging limbs or brush, yet this thing cant mow for more than 10 minutes before it gets 'lost' and says its outside the map boundaries (its not). There is no way to correct unless you manually drive it back to the station and restart. The app is terrible. No reason i should have to drive the mower to set a no go zone. No way to edit without a full remap. No way to manually control when it gets 'lost' unless you are within 5 feet of it, which is obnoxious considering you can watch the thing mow on a camera. The lack of that function is mind boggling. Automapping is awful (and mower wouldnt complete).

I ordered the ECOVACS Goat A3000 to replace my EcoFlow Blade (discontinued). THE GOOD: (received 07/07/2025) After having this thing for about 3 weeks, I think I'm in love. Any problem I ever have with this mower pales in comparison to having to deal with an RTK antenna and the GPS map drift that an RTK antenna SHOULD correct. THE BAD: The LIDAR and bumper work great for detecting taller objects (e.g. 4x4 playground posts). However, they do seem to detect my fire pit pavers. The mower actually rammed itself onto the blocks and came down off the corner, sheared a blade screw, and left us searching the backyard for the missing razor blade. THE ABSOLUTELY F***ING ANNOYING: It tries NOT to mow tall grass chutes or seedhead stems. These things shoot up within a couple days so the only way to avoid this issue is to mow every single day. Maybe it's regional. I do live in central Louisiana. This mower, while mowing my bricks, will still avoid mowing strips of grass if it has any tall grass seedhead stems. If you watch on its camera while it mows (cool feature), you will see it drive up to a seedhead stem, stop, turn around, and continue to avoid that area. Then it'll go continuously try to mow my dog's drinking fountain, mow a few pavers and try to throw itself into the fire. SUMMARY: I still freakin love it. I just really wish it would stop avoiding grass. They need to push an update that allows it to better use its LIDAR to see what material is penetrable thus mow-able and use its camera to identify tall, skinny objects with stems of less than 1/8" or give you the option to ignore anything in that category specifically. It has the option to turn on/off AI recognition for hedgehogs, cats, dogs and pipes. I just hope your hedgehog ain't brick shaped.