Liwinting 10pcs 5 Pin L Shape RGBW LED Strip Connector Splitter Right Angle Corner or 90Degree Connector for 10mm Wide SMD 5050 RGBW/RGBWW LED Strip Lights LED Ribbon Lights LED Strip to Strip Adapter
Description
- 5pin L shape Connector Only suitable for 10mm wide SMD 5050 RGBW/ RGBWW LED strip lights. Not suitable for 12mm wide SMD 5050 RGBW/ RGBWW LED strip lights!
- Compatible with both Waterproof and Non-Waterproof 10mm wide SMD 5050 RGBW/ RGBWW LED strip lights.
- 5 channel PCB chip with 2 easy-clasp connectors, Seamless extension for your RGBW LED strips around sharp corners
- Simple but effective, tool free, easy installation by clipping system, making neat and good looking LED strips turn corners, couldn't be any easier using these connectors
- With these L-shaped connectors, you can avoid twisting your LED strips which potentially damages your LED strips.
5pin L shape connectors for RGBW/ RGBWW 5050 LED strip lights comes with 2 easy-clasp connectors and a 90 degree L shape PCB board. They are compatible with both non-waterproof and waterproof 10mm wide RGBW/RGBWW 5050 LED strip light. Installation Instructions: 1.Ensure your LED light strip has 5 contacts (+, G, R, B and W). 2.Open the white clasp of the connector. 3.If you have a waterproof LED strip, you should peel off silicon on the surface around soldering/cutting line area, then insert the LED strip into the clasp, with the 5 copper contacts on the LED strip under the 5 prongs in the connector. Make sure to match the + side on the LED strip to the + side on the connector; If you have a non-waterproof LED strip, just insert the LED strip into the clasp, with the 5 copper contacts on the LED strip under the 5 prongs in the connector. Make sure to match the + side on the LED strip to the + side on the connector 4.Close the clasp. 5.Gently pull the LED strip to confirm you've made a solid connection. 6.Your connection is successfully made! Package Includes 10x 5pin L-shape connectors for 10mm wide RGBW/ RGBWW 5050 LED strip lights Tips: If the connection becomes loose, the LEDs will flicker or do not light up. To solve the problem, please follow these steps: 01. Power on your LED strip. 02. Open all the caps of the L-shape connector. 03. Insert your LED strip into the connector, slightly pull and push your LED strip to adjust the contact points between the 5 copper contacts on your LED strip and the 5 prongs in the connector. If the LEDs still do not light up, please use your finger to press a little hard on the 5 prongs in the connector. 04. If the LEDs still do not light up, please adjust the contact points between the 5 copper contacts on the L-shape PCB board and the 5 prongs in the connector, until you see the LEDs light up.
Reviews
J**K
not good
they were ok to use but once a suitable connection was made the led would loose colour in parts, i tried a different led strip different brands both good quality i even got my colleague to gave a go but with no luck
Common Questions
Trustpilot
2 months ago
1 month ago
