EF335 Folding Knives D2 Blade and G10 Handle,5 inch Closed EDC Pocket Folding Knife with Clip (gray)

This is really a great quality knife that punches well above its price. Smooth action, great blade shape and very sharp. The knife is blade heavy, but this really aids in positive deployment. The finger grove in the blade really gives you leverage over the blade for cutting or defensive actions. The flipper provides a positive feel and acts as a guard in the open position. This knife is large but not difficult to carry and really feels great in the hand. Highly recommended.

unfourtunatly returning because of my 2 negative points the worst being mine arrived rusted seems the manufacturer doesn't use packing grease to keep the d2 from coroding which is unfourtunate because there is a lot of it like A LOT huge knife .15 stock and will say mine at least was perfectly sharp. the other negative is that the handle material is listed as g10 but feels and sounds more like 3d printed plastic which also is unfourtunate because of the hollow sound it makes when the very heavy blade with better action than my 200$ vipers and spydercos have dead falls shut. the plus side if your looking at it is the knife is sharp bearing action is stellar litterally one of the best iv seen centering dead on lock up tight with 25% engagement solid lock geometry I would be cautious with hard use because liner has the slightest flex. may want to flare the lip on the pocket clip a bit if you decide to keep yours its tight and sturdy but a little thin and doesn't quite ramp on a blue jeans seam probably gonna take my refund and get the titanium strider clone they make because even low tier titanium would feel better than the plastic but I truly respect the machining quality. 1 nit pick which is a bit unfair for a 30$ knife is the hardware isnt countersunk but if you want a big scary knife that's razor sharp super fast sturdy and unless you try cold steel tests on it with regular use should last forever its a win just remember she's a big un

Let’s face it: the Chinese have gotten crazy good at cloning MT knives. At least when looking at the $30 range folders and $60 OTFs. I mean, I own some clones that came sharper and with better action than the originals (which cost 10x more) and the fit and finish is pretty much the same these days. Sure, the materials are inferior and so is the QC, ultimately leading to reduced toughness and dependability, but if you get a good one, it will be rugged and reliable enough for most of us, who’ll use these knives for some fidgeting and LARPing and then (maybe), some occasional cutting. What I received from Eafengrow is an amazing DOC clone. I’ve only played with a DOC at a dealer before but from everything I can remember, this looks, feels, and works exactly the same. Excellent fit and finish, no blemishes or defects and buttery smooth action, no matter whether you use the flipper or the thumb studs (my favorite method of deployment). The detent and pivot action really are good, especially after some pivot lube and considering the heft of the blade. It’s hard to botch blade deployment with this knife. I mean, it doesn’t open very quickly or snappily but very smoothly and confidently. The blade centering and liner lockup are great too. Deploying this chonky, nasty, sweet looking blade always brings a smile to my face and the knife is a joy to wield and practice (cough… LARP… cough) with. The only grip style that sucks is the edge down “ice pick” but that’s an issue with the vast majority of liner lock folders out there. The finger choil and jimping are great for some precision cutting and my blade came with an excellent sharp edge. Here’s to hoping that the D2 is properly heat-treated for decent hardness. That can be an issue with budget Chinese knives. Oh yeah… unlike MT, Eafengrow is nice enough to include a tool for the proprietary screws, in case you need to adjust the pivot or simply take the knife apart! Anyway, if this knife looks good to you, for the asking price, just buy it! If you end up with a victim of bad QC, just get it replaced. This is an awesome knife for the money! As my title says, with the current batch of MT clones, you get 95% the knife for 10% the price and this particular knife is a perfect example of that.

First it's a big knife which i love . Comes with the tool to tighten the pivot and other screws. The tool and screws are even made of nice hardened steel. Then the blade is nice piece of D2 Which sharpens to super sharp edge that cuts everything like butter (very happy about that), holds edge very good so the heat treatment was done right. For the price this is a great knife. Why buy lower grade than D2 steel blade . when other lower grade steel just dull so easily and have such lower toughness and edge retention. The ball bearing pivots help it flip open pretty good . not the super silky like a super expensive knife (but they don't always open super great) but only had it for a lil bit n it is already getting smoother the more i open it. (I own other eafengrow knives and they all open relly nice after a few weeks of use). The liner lock locks up very solid. I seen other brands(expensive ones) that when bang on back of knife will close on your hand. And a knife this sharp that's the last thing you would want to happen. So i tested it by hitting it with 3lb dead blow hammer and it stayed solidly locked up. So very satisfied that it will not fail on me . Then one surprise i really love is the choil on the knife(lil indented curve just behind the blade area where you can put your finger for a choked up grip for better control) .it is the first knife i have owned that it is actually rounded and smoothed out so feel very comfortable when you put your finger there(real reason i never have used or cared for a choil on other knives before) but this one i find myself actually using it on a knife for once. N ya i show that point to all coworkers (were all woodworkers n use knives all the time . i carry 5 knives all the time ,each one is used for different purposes at work ) Well hope this help make someone pick up this nice knife TERRY F.

En relación calidad precio, creo que no hay muchas navajas que compitan con esta, estoy impresionado de lo bien que se ve y se siente esta navaja, muy bien!!!