MK4431 Right Engine Motor Mount 4431 For 2010-13 Ford Fusion Mazda 6 Mercury Milan 2.5L, 1 Pack

Bolts right up. The dealer wants over $100 for this same mount. F that!

Saw several videos on this. Truly the hardest part is finding the oil pan to put the jack under to support the engine . You do need to have a jack under as the engine will drop down couple inches when the main 21mm bolt is undone. Tools: 8mm, 10mm, 15mm deep, 18mm deep, 21mm sockets . A universal for sockets, pliers for clamp to rad tank, extensions. Pry bar to align (nudge over) the motor when starting bolts.

I was able to use the product but I had to modify it for the bolt holes to line up. The two holes on the frame rail were both out of alignment. The one closest to the firewall was 1/8 out and the hole closest to the bumper was a 1/16 out. The way I fixed it was to drill the third hole out on the fender apron that goes over stud. I used a step down bit to drill it out. If you don't have the tools or know how you wouldn't be able to use the mount. You shouldn't have to modify a part to for it to fit. However it was cheap and fixed the vibration. If your having problems with weird shifts replace the drivers side mount and this one and it could fix it. I know it did for me. Would have uploaded pictures but it wouldn't let me.

2010 Ford Fusion 2.5 Auto... This, along with the drivers transmission mount stopped the horrible vibration at a stop with the car in drive. The originals wear out quick. just as good as OEM.

worked good

Fast and correct what else is there