FlexzillaPro High Flow Coupler, 1/4" Body, 1/4" MNPT - A53426FZ

Exactly what I was looking for, gives the tool some movement on the hose. This one does need the high flow V style coupling on your hose. These seem well made and action is smooth.

I received my package and other than most of the items lose in the shipping bag, it was fine. No damage to product just not a perfect package. Caused some ??? in my head but after looking, they were fine.I removed my old coupler to the compressor and attached the new one. Fit was perfect. Fired up the compressor (it was empty as the 20 year old coupler I had on it was leaking) and no leaks. Very happy.Swapped out a connector on 3 of my air tools and hooked them up. No leeks and seems solid.I really like the push connection. Having to pull down on a ring to insert and remove a tool was cumbersome. The push on is great. You have to pull down on the ring for tool release and it pops right off. Some may not like that it kind of ejects the tool, but you should be holding on to it anyway so it shouldn't be a big deal.Overall my initial experience with these connectors is great. If they last, I will be a very happy camper. If not, I'll probably have to spend the big money and move over to the Prevost couplers and plugs. Those things are fantastic. However, for a home shop/garage I just can't justify $25 per coupler when this whole kit was less than that.

I love everything flexzilla. When I found out about high flow couplers i immediately searched for Flexzilla and saw they had their own. They installed smoothly into my flexzilla hoses and they work great.Pros: Great qualityCons: You're still reading this and you haven't purchased it yet!

Product was just as described and fit perfectly for my need. Thanks

These fittings are well made & lock together very smoothly with no leaks. Threads are cut well & gave no trouble when tightening. Vastly better quality than the cheaper brands I've tried.That being said, the packaging is terrible. The fittings come sealed between a cardback & plastic cover. The problem is, these fittings are heavy & the adhesive holding the packaging together is weak. The first package I received was busted open & missing 3 fittings. The replacement item was open as well, but fortunately all the parts were in the envelop. The parts got scuffed up rattling around but I count it as a win that I didn't have to reorder a 3rd time. For the price you pay, it'd be nice if Flexilla would give you a plastic case to store them in. Or at least fix the packaging, then they'd be worth 5 stars.

I got these for my smaller hoses, been very happy with Flex Zilla hoses the past few yrs...and more recently their "Hi Flow" ends. Then I needed some ends for a 1/2" hose with 3/8 ends, so I bought a cheaper brand (4.5 star) of so called "Hi Flow" ends and noticed right away that their inner diameter is smaller than Flex Zilla. Both the off brand ends and some Milton "Hi Flow" connectors I bought had smaller inner diameter than these ! If you just run nail guns then maximum flow is not as critical. They'll run fine on standard ends. But if you are running tools that require torque and continuous flow, like air ratchets, impact guns, then you want the biggest inner diameter for the most flow, to get rated output from these type tools where YES, it matters. It's comparable to using a thin 12ga wire jumper cable to start a car vs a thicker 6ga jumper cable...yes the 12v is the same, but the thinner cable can't carry enough current...and while yes many things will work, like the dome light, stereo, even headlights... the starter would struggle. Same deal with some air tools that require enough flow, not just the right pressure. The Flex Zilla is more money, but let me save you the time and aggravation...just buy these . See my pics for reference. On the left is the wide open 0.291" i.d. flexzilla...on the right is an off brand with smaller 0.259" i.d. ...also not shown is a Milton Hi Flow which also measured 0.259 i.d. I'll be ordering Legacy Flexzilla 3/8 ends . note: shown in my pics are a 1/4 flexzilla and the other is a 3/8, but the male part that you push into the coupler is the same size...just larger inner diameter on the flexzilla.

Upgraded all my air hose and tool fittings to high flow. With my 20 gallon compressor my tools all run better and longer before recycling.

I am extremely impressed with the way the female coupler release sleeve stays pulled back, till you insert the male coupler it snaps closed so slick. Literally you can snap them together with thumb and forfinger of the same hand you are holding the hose and air nozzle in!

Nada de fugas

I upgraded my line and fittings, and my dual action sander ran like never before. Highly recommend. Use them for spay painting cars as well.

Good quality and fast ship. Thanks

So far no leaks

El producto es bueno a comparación con los comerciales que vende en cualquier ferretería, me gusta que tiene más flujo de aire y eso se refleja mucho en el uso de herramientas neumáticas y en el uso de pistolas de gama alta para el repintado automotriz.Un detalle que no me gustó es que llegó todo regado en una bolsa por qué el empaque estaba roto y se rallaron y pense que eran usados.Por lo demás es un producto que se ve de calidad y que da buenas ventajas , llega a tiempo y a buen precio.