BulletProof Hitches - 2.0" Adjustable Light Duty Trailer Hitch (10,000 lb. Rating) - 4" Drop/Rise Trailer Hitch with 2" & 2-5/16" Dual Ball - Powder Coat, Box Steel, Corrosion-Resistant

First time Truck Owner, and first time towing, having this mount ball hitch was a life saver. I could adjust the height according to the trailer height, the ride was smoot and no rattling was heard during a 8 hour drive.The finish is great and sturdy, it has 3 height position and 2 ball sizes which made adjustments easy.

Great product. Very good quality. Very easy to use.

Bulletproof makes very good trailer hitches but this is one of their lightest duty models. It has a single pin connecting the ball mount to the hitch height adjustment holes. It is rated for pulling 10,000 pounds but only 1000 pounds tongue weight. The tongue weight rating of my pickup is 1100 pounds. If I were to order again I would order a model with two pins connecting the ball mount to the hitch height adjustment holes. I intend to use this hitch with a reasonably light 20 to 25 foot long camping trailer that I have not purchased yet. It should be ok but I will have to check with the trailer manufacturer to see this hitch is sufficient. If not, I will have to order a heavier duty model. I have no problem with the design and quality of manufacture of Bulletproof hitches but don't order a lighter duty model than you need, as I may have.When I received this hitch the external Amazon box was intact but the internal box had been opened. Upon inventory of the contents I found only one 5/8" hitch pin and R-clip where there was two pins and clips on the packing checklist. See the attached photo. One pin and clip had been removed from the box. The product listing and description only states that only one pin is included, so the contents were accurate to the product description. I will have to purchase another hitch pin and clip locally to connect the hitch to the vehicle. Not a major expense, but be aware of that when ordering.

Use this on my 23 Tacoma for a small enclosed trailer. Very happy with purchase. Highly recommend

Love the durable and look of the hitch

I have three different vehicles that I pull trailers with. A compact pick up, an SUV and an F350 with a 6 inch lift kit on it. That is a wide variety of vehicle heights that I have to accommodate with trailer hitches. I also have three different types of trailers that I pull. A 10 foot aluminum trailer that I put my two Harleys on, a 35 foot flatbed that I haul ATVs and tractors on, and a hydraulic dump trailer for firewood and construction debris. as you can imagine, with those different vehicles and those very different trailers, I have a lot of different hitches laying around in the back of all of my vehicles. I require a variety of different sized balls on straight hitches and drop hitches. I’m constantly looking behind seats for the right hitch to fit a particular trailer to a vehicle. I do have one other adjustable hitch like this however with that one, it requires wrenches to remove and adjust the height of the ball. As you can imagine, it’s not worth the hassle and I never bother to adjust it. It stays with one vehicle to accommodate one specific trailer. This bulletproof hitch is so easy to adjust by merely pulling the key and moving the pin upper down, it will make my life much easier. It also has the two most common size balls on it so you don’t have to switch hitches just to accommodate a different sized ball. You simply pull the pin, flip the ball upside down, and reinsert the pin. Piece of cake!This is a very well built and quality hitch. The ease of adjusting the height is amazingly simple. I can move this from one vehicle to another, switch trailers, and adjust the height in literally seconds. The best thing about this, it’s American made! I looked the company up and they are based out of Florida. It’s so hard to find American made products anymore.This is a great hitch. It’s going to allow me to get rid of some of my other hitches and simplify. Why didn’t I look for one of these years earlier? I absolutely love this product, I think it is a very fair price and has a high enough weight rating to accommodate any need that I am going to have for it. As an added bonus, because of its ability to drop down, when I am using my small Polaris Ranger I can flip this upside down and actually use it as a lift hitch to haul a trailer with my side-by-side. Pulling a trailer with the side by side is generally difficult because it’s so low, but this will work in reverse, allowing you to raise a trailer as opposed to dropping it.

Nothing bad to say about this product, couldn't think of a better name than Bulletproof...couldn't be more fitting. Made in the USA, pride and quality workmanship shows in this product.... A+++++ HIGHLY RECOMMENDED!!!!!!!!!!!

This trailer hitch is rated for 10,000 lb and is well built. The steel has a rough surface, which looks good and durable. I just wonder how it will hold up on the ball with all the wear and tear on it. The part that has the 2" and 2 5/16" balls is a solid piece of metal. Very heavy and very heavy duty. I like that a real person signs off on the inspection and packing of these, giving me confidence that they are built with pride.The stick pin that holds the hitch to the truck is pretty basic. I'll toss this one and use a locking pin because I don't want my hitch to walk away the first time I park it with no trailer attached. I got this one to use on my old F150. It will be plenty strong for that. In fact, the hitch might well be the strongest thing on the truck.I'm pleased with it so far. My only suggestion for improvement would be to add a locking pin. I got the 2" rise/drop, as that will give me all the rise or drop I need for my truck. Since it is not 4 x 4, I will generally run this about even or maybe up one inch. Anyway, it's a sturdy, well-made hitch.