ARCTIC Liquid Freezer III Pro 360 A-RGB - AIO CPU Cooler, Water Cooling

Bro I got 7700 that supposed to run hella hot it never makes it past 65c. I got it on sale and I'm usually anti RGB but I like it. It does get kinda loud but worth it on my long BF6 sessions running my 5080 and steady 155 fps 2k monitor with overkill settings. It is my bottleneck but by like 5 fps. Easy to install if you have the right case, comes ore wired. Had a few months now and it's running great and no raises in temps. Love the thing, it is kinda big keep that in mind.

Lives up to the hype, and I'm glad I got the updated version. Wasn't even aware this dropped until I went hunting the previous LF3. Installation wasn't difficult. Tubing is a tad long, but that's just due to my case having the mobo mounted a little higher. It fits fine and after a little adjusting there's plenty of room. Be warned: if you use the all-in-one cable you will not be able to monitor the pump or vrm speed.. that's normal. The pump will just run at the same % as the fans, so after some curve adjustments it's nice and quiet (and cool). Being it's got updated fans, and other small improvements over the previous LF3 I'd say it's a great value. If you get the black version then even better (at the time of this review the blk version is $88..). My case is a Lian Li 507, so it's a rather compact mid-sized case, and (while snug) it fits fine. Like a glove, even. A little over a cm clearance on the front and back, but oh so clean. After getting my fan curves dialed in properly (coming from a Peerless Assassin, which is still great) it runs cool and quiet-ish, as I stated above. This will have more to do with your case and other factors. I'm sure it's louder than other AIO, but I'm happy with it. Performance is solid. Installation was easy and rather fast. The online guide is great and interactive, depending on your chosen mounting method. And aesthetically it looks great. I do love that the face plate is removable, while the magnets are strong. Not sure why the "blades" you see are static (it's more of a grille), but the VRM fan appears to be substantial and u can feel a good bit of pressure coming from it...so that seems to be very functional. I hope they release a screen that's is compatible with this at some point. Edit: swapped to the split cable and adjusted my fan settings. WAY more consistent temps now. I had an issue with spikes where it would ramp up then settle once it was cool then ramp up. I'm sure this was more to do with my curve settings, but since I did this and set the VRM and pump speeds to a static 60% it's quiet and more cool than before. I also undervolted my CPU and I cruise at a solid 41C under load.

Alright, I love the aesthetics of this cooler but let me warn you of a couple of things. 1. This is already put together, so depending on your setup, that may be a plus for you. It was not for me, so reinstallation took FOREVER. The daisy chain cables connecting the fans are only as long as they need to be. All the cables except the one connecting to the motherboard are ONLY as long as they have to be. That was frustrating and will come up later in the review... 2. The radiator is thick. This is the thickest one I've ever seen. It actually hinders me from using smaller cases; not the GPU which is crazy to me. 3. Lastly, the fan LED. Unfortunately, a couple of my fans purchased with this AIO and purchased separately are defective OR it could be the fact I had to squeeze out every millimeter of length I could. I'm truly unsure. Every so often, they blink a red color. I have swapped fan position around in my case to avoid seeing the jarring intermittent flashing and have set it to breathing in the RGB app. Honestly, if I had known how thick this was, I would never have purchased this and avoided a lot of fitment trouble in the Meshify C, still, in 2026. If you have a large GPU and a small case, don't get this. If it is medium to large, you'll be fine. This is not a small(er) form factor AIO. It does keep my 7800x3D cool and it does give off a lot of light in my case. I could forgive it of everything if it wasn't so damn fat.

This is the best performing AIO on the market! Check any comparison and you'll see it's the best. I got mine in white , installation was not the very obvious one, and CPU brackets come in black color. But I painted them with spray paint and got an all white look. It runs very cool, and noise isn't bad at all. Absolutely love this AIO.

Keeps my CPU cool enough. Not as cool as a custom water setup but good enough for this smaller build.

My build consists of an undervolted 9070xt and a 5700X3D. To start, my room temperature is 70f/21c. Getting into the temps with my old thermalright phantom spirit, my idle temps were 45c, and the GPU was sitting at 58c with the hotspot at 60c, and GPU memory at 78c. Multi-Thread under load, I'd hit 67c. In Single-Core under load, I'd hit 57c. The GPU would hit 48c, with the hotspot at 60c, and the GPU memory at 76c. And now for the ARCTIC Liquid Freezer III Pro... At idle, the CPU would sit at a cool 37c. Multi-Thread under load, 59c. Single-Core under load, 52c. And the GPU, 44c. The hotspot, 53c. The GPU memory, 71c. NOTES: It's important I add GPU temps in here because obviously, it's in the same case. Each component may warm up, thus heating the air inside the case, and thus further heating the components. This is made clear with how the GPU ran cooler when upgrading the CPU cooler. I would also like to note that my room is noticably cooler, whereas previously, I'd take breaks from gaming because the room would get too warm over long gaming sessions. Also note! I am NOT a benchmarking expert. I am an everyday gamerike most of you, and simply wanted to jot down my findings on the different temperatures I'd experience after upgrading my CPU cooler. In saying that, maybe take this review with a grain of salt? Your mileage may vary. I absolutely recommend this product though!

If you have never installed a water cooler for your pc before then fear not the instructions are very good and they even have videos on how to install it which you can get by scanning the QR code on the box if you need help. The cooler even without the instructions is really easy to install perfect for beginners and professionals. This thing keeps my pc at a very good tempter so overall I would highly recommend it as I got zero complaints or regrets with getting thing for my computer

Really good AIO. I knew AIOs made PCs run cooler, but it has my PC running so cool that my exhaust fans are blowing out cold air.

questo dissipatore a liquido Arctic merita 5 stelle per il suo rapporto qualita' prezzo imbattibile. l'ho acquistato per raffreddare il mio ryzen 7 9800x3d e fa il suo egregio lavoro. PRO: - esteticamente molto bello e i led funzionano molto bene. - raffreddamento ottimale in ogni situazione, anche dopo ore di gaming. - facilita' di personalizzazione tramite app di terze parti. (alta compatibilita'). - rapporto qualita' prezzo imbattibile. - nella confezione ci sono tantissime viti per adattarlo al meglio in ogni case. CONTRO: -dissipatore molto grande e spesso, non tutti i case sono compatibili. soprattutto per quanto riguarda la parte relativa al radiatore che risulta essere molto spessa. dal mio punto di vista puo' essere montato solamente in case atx grandi. nel mio caso e' stato montato nel case piu' grande della msi e c'e' stato giusto giusto.

Um dos melhores WC Aio do mercado.

Its a bit noisy yes, but oh boy the cooling it does, totally worth trying it. Although it forces you to use their braket for the processor, i hesitated but now I am okay with it.

⭐⭐⭐⭐⭐ Ich bin sehr zufrieden mit der ARCTIC Liquid Freezer III Pro 360 A-RGB. Die Verarbeitung ist hochwertig, die Montage war unkompliziert und die Kühlleistung überzeugt auf ganzer Linie. Ich nutze die AiO mit einem Intel i7-14700K. Im Vergleich zu meiner vorherigen Wasserkühlung sind die Temperaturen unter Last spürbar niedriger und deutlich stabiler. Besonders positiv aufgefallen sind mir die leisen Lüfter und die sehr gute Gesamtqualität. Auch der mitgelieferte Contact Frame ist ein großer Pluspunkt und sorgt für eine optimale Auflage auf der CPU. Die ARGB-Beleuchtung sieht dezent und hochwertig aus. Für den Preis bietet die Liquid Freezer III Pro 360 eine hervorragende Leistung. Klare Kaufempfehlung!

I bought this AIO cooler when upgrading to a more powerful CPU, and my previous 240mm cooler likely wouldn’t have been enough. I went with the white version simply because the black one wasn’t available at the time, but it actually looks really good in the build and fits nicely with a lighter setup. After a few months of use under fairly heavy loads, I haven’t had any overheating issues. Performance has been solid and consistent. Installation was straightforward. Most of the assembly is already done, so it’s mainly a matter of mounting it and connecting everything, which makes the process much easier. One feature I really liked is the additional small fan for the motherboard area. It’s attached magnetically, so you can remove it if you don’t need it, which is a nice touch. The package also includes mounting brackets for different CPUs and some spare cables, as well as thermal paste, which is convenient. The software is another plus — it allows you to adjust fan speeds and customise the RGB lighting quite easily. Overall, very happy with this cooler. Good performance, nice design, and easy to work with.