Loctite GO2 Glue, 3.5 oz Clear

Works fine and holds well and for the most part waterproof or at least water resistant.Only 'cons' are, the bottle is stiff and hard to press the glue out the tube. I noticed some glue sticking 'inside' the bottle that 'might' eventually have to be removed if it starts blocking flow. Nifty cap just kinds clicks in place and the entire two piece cap has a 'reverse thread' if you really need to get inside.My only other question is, now that I've used it a few times and sucked air back into the bottle how long will it remain good.I still remember those tiny metal tubes of "Super Glue" that you used and a month later the remainder was dried out.Only time will tell and it's still good after a few weeks of light use.I'm happy and hope this helps you in decision making.UPDATE a few weeks later:Still happy with this product but continue to have difficulty squeezing the bottle. Someone with stronger hands probably would have no problem. I just unscrew the tip and stick a screwdriver in to get a bit and use the screwdriver to actually apply to glue exactly where I want it. The glue just wipes of the screwdriver with no problem. I kinda like it that way.Some will shake their heads with my latest use. My laptop has a USB port that goes to a 7 port hub and external USB drives among other things. The connector and socket on the laptop would lose connection from time to time as I moved the laptop on my lap (It's a laptop) thus causing all kinds of serious issues with the external drives. You probably know where I'm going with this. :) I cleaned the connections, plugged in the USB cable and put a bead of this glue around the plug much as one does 'caulking' in the bathroom and let it set overnight. It solved my problem and has a slightly soft feel when pressed with a fingernail so I figure a bit of solvent and a screwdriver will pry it out again if I ever need to remove it. DON'T get glue 'inside' the plug or jack just the outside. Remembering the days of serial ports and monitor connections where real screws or wire clips held the plugs in place I wonder why 'something' similar wasn't used with USB. Oh well, sounds crazy but solved my disconnections and Windows sounding warnings and going bonkers. As said before this stuff goes sets up clear and is slightly 'springy' not brittle.Yeah, he glued his USB connection to his laptop, must be crazy. :-) Out of the box thinking.

this product is great for sealing paper labels. i use it to preserve the factory schematics glued to the bottom of antique tube radios. the paper is very brittle, and this product holds the document together, preventing crumbling. other types of glues i have found dry too fast to lay out flat and smooth, or they dry milky, not clear, or they cause the ink on the document to run. go2 glue does not cause any of these issues. however, the product cannot be too old, for if it is, the glue sets up in the bottle, as did this particular purchase i made. try to find the smaller size bottles, as the large ones probably sit on the shelf a lot longer.

I was a dummy and bought 2 of these under high recommendation from a guy who does a lot of finished wood items. When they arrived, I noticed there was no kind of seal on these bottles, and could see they were both really thick. I opened one to use, and regardless of how hard I squeezed none would come out. Come to find out, the nozzle tip was totally dried closed. I had to push from the small opening to make most of the dried clog come out. The glue was so thick I could barely squeeze it out of the bottle. It never dried/adhered what I was applying it to. Don't waste your money. Not sure if this is just old, glue, or if it had been frozen once, or what... but it totally didn't work. At . All.

Takes a quick set, but not too quick. Dries to a slightly flexible clear consistency. Thick and stick where you put it and seems to bond to most surfaces including most plastics. Doesn't seem to harden in the nozzle. Excellent for many minor repairs.

Works well but I had the cap on tightly and 1/2 the bottle dried

I really like this adhesive. It seems to have the best of urethane and silicone. I will bridge small gaps, does not foam like urethane and holds well. I have used it for a number of things, but it is fantastic for repairing my wife's water sandals. And no nasty odor when curing. It is not the most aggressive sticking glue I have used, but it works for everything so far. I remains slightly flexible when cured and not sticky, but the opposite of a hard glassy feel. It does have a shelf life, so keep it dry and sealed. This is the third bottle I have purchased, so I must like it.

I’m always going to have this glue on hand. I had to repair a magnifying glass on a Swiss Army knife. I was able to keep the glue on the rim, and off the lens. The 5 minute set up time gave me ample time to set the lens, and the hold is strong. I’ve got so many projects I’ll be using this on. I was also surprised at how much glue I got for the price. It is a much bigger container than I was expecting.

I have used this before to put stars on the ceiling in my kids room and it is permanent. Good stuff and I am a repeat customer of this product.

Glue was rock hard and dried out inside the tube

Lo tuve Guardado y el día que lo quise usar, resultó que estaba seco

Worked as expected

bon frein filet fonctionne bien sur mes filetages

Not good