C1608054 20" Gas Prop Spring Strut 20 inch 100 Lb Per Shock C16-08054 for Camper Shell RV Bed Tonneau Cover Storage Box Basement Door Floor Hatch Window Lift Struts (Fit 85-110LBs Lid, No Brackets)

very good struts, easy install. much better price than truck cap store in Akron Ohio.

I bought these to replace the struts on the basement storage of my rv. They fit perfectly and do a good job of holding the doors up. The clips can be a little difficult to pry up but a small flat blade screwdriver does the job. One of the clips was especially difficult to pry up and I found out why when it snapped off. I contacted the seller directly on their email and they quickly sent 4 replacement heads. They have very good customer service.

These gas prop struts work exactly as described. They lift and hold weight smoothly with strong, consistent pressure. Installation was straightforward, and the 100 lb rating feels accurate for camper shells or storage lids in the 85–110 lb range. Durability & Reliability: Built solid with good pressure retention — no leaks or sagging so far. Ease of Setup & Use: Simple to install and operate, even without included brackets. Overall Quality & Value: Great quality for the price. A reliable replacement option that performs just as expected. Q&A Q: Do these struts hold their pressure well? A: Yes, they’ve maintained full lifting strength with no loss of pressure. Q: Were brackets included? A: No, these come without brackets, so be sure to have your own hardware ready. Q: Are they worth the price? A: Absolutely — strong, dependable, and easy to install.

I used these to replace the ones in my 2005 Scion XA rear door. Slightly too much force, but my door definitely opens up and stays open now. I just measured what my door pistons currently min and max at for length and picked these by estimating the force with leverage in mind. I was a little surprised they came with the ball ends and washers, but no nuts. Luckily I had 4 of the exact nut that was needed. Drilled out the doors riveted ones and put them in. They clip in the fittings very easily, but I wish the ends werent plastic as it seems just a little fragile while prying the clips. The customer service was great assuring me that they will warranty them for sure, and I guess it should be fine since the force is always a "push" against the metal piston parts and the clips only really stop a pulling off force. If it was an application where someone may attempt to overextend them I am not sure I would be comfortable with the plastic ends. If they are indeed only plastic inside then someone could easily push something too hard, break them, and now you have a scenario of something heavy falling on someone. Amazing for the money and have a slight feeling that they may be a little more than 100lbs of force. Almost took my whole body weight (160lbs) to compress one. (DO NOT DO THIS WITHOUT TAKING OFF THE PLASTIC ENDS)

I replaced my RV's original bed shocks with these and they work great! My old ones did not work after I switched to a heavier matress and these fit just perfect!

Work great! Just what we needed to help lift the bed on our RV.

Used to support our rv lift bed ours were worn out

Sturdy, well made, can't be returned once extended. The comments on Amazon said these struts fit a 2017 Thor Compass. Not mine. I have a 2017 Thor Compass with a rear slide out where the Murphy bed is located. If I pushed the bed farther back than the usual storage position I could install the struts. However, the bed could not be lowered. I looked at the old struts that said 0150N on the cylinder? Looked it up. It means 150 Newtons, which is about 34 pounds. So the struts are more thn 6 times too heavy for the bed. My inexperience in ordering them. I found 27" struts that support 34 pounds and they fit and work perfectly.

These struts worked perfectly in my Crownline 185 engine cover/sunpad. The strut sockets snapped firmly into the original ball hardware so the strut change took less than five minutes….. and no more engine hatch landing in my head when I’m checking the engine. Excellent quality as well.

Item arrived on time, good quality item, easy to install , reasonable price, would recommend this item!

Tal como en la descripción y con todos los aditamentos

No e.podido instalar pero lo are en su Memento

Needed for a hot tub cover we found them all made easy to fit, well worth the money and would recommend.