Ames Research Laboratories BMX5RG ブルーMAX防水機、内装および下級外装コンクリートシーラーなど液体ゴム、5ガロン(1個入り)、640Fl Oz

This served as a primer for an elastomeric coating, over a weathered modified bitumen roof. It's important that you clean the surface first with a soft wash or light pressure wash to get rid of any accumulated gunk that may block adhesion. But once you've got a dry & clean surface, this stuff sticks like, well, glue. I laid down two coats several days apart. It dried / cured fairly quickly, so I was able to walk on it after 24 hours (after each coat). Rain doesn't seem to hurt it after it's had a few hours of initial cure time. Just get it good and dry before re-coating. I'm now finish coating it with AMES Elastomeric white roof coating, with good results so far.

I actually used this to seal my subfloors after attempting to neutralize pet stains. The stains were the worst! This product is amazing, easy to use, very easy to clean up. Would use 10 out of 10 for any waterproofing need.

Good stuff can’t go wrong here easy to apply more than one way to do it

You are not going to believe how I used this product. I build a whole water tank just with the product. No mortar used. Nice and thick but no pasty. Application easy I used ketchup bottles to spread. I used 2 of them on a cabin roof and painted over for water proofing. If you are DIY. You need this. This is my 8 bucket order.

We used this to cover the floor deck to our house prior to having it protected by walls and a roof. It protected the tongue and groove plywood from water, and water did not seep into the tongue and groove ceiling for the basement below. We used 3 coats and tarped it, sweeping rainwater off the tarp and occasionally removing the tarps so everything could breathe and dry out. We have used it on our barn decking during construction as well (see photo). No smell or harsh chemicals!