Question 1

can I use this over raw particle board and then paint or stain?

Accepted Answer

Paint yes , stain I wouldn’t try it .

Question 2

Will this protect mdf/particle board from moisture?

Accepted Answer

Yes but if the area is subjected to repeated water exposure it will eventually wear off. I used it on a window frame behind my kitchen sink. The frame is some sort of pressboard cheap stuff. The area is constantly wet being so close to the sink so after several months the paint did wear off. Hope that helps!

Question 3

Does this work over varnish? I want to reprint a wooden chair that has been varnished and am hoping to skip sanding or stripping.

Accepted Answer

I've used it many times over varnished wood, and had very good results. Most people, these days, seem to skip the middle steps of sanding and wiping down, and are pleased enough with the results. I prefer to do it old school and reap the benefits. Even 1-2-3 will adhere better if you break the gloss, first. Your end results are only as good as your preparation. If the chair is old, it may be shellac and not actually varnish. Zinsser also makes a shellac-based product called B-I-N. Both work really well.

Question 4

This stuff really works without sanding? I have a wood dresser I am looking to makeover and don't want to have to sand it all

Accepted Answer

The primer will likely stick to that surface. You might want/need two coats for adequate coverage depending on how dark the existing finish/paint is and where you are going with the project. You probably will get better results with sanding, though. Depending on how particular you are about the finished product, you might find it worth the time and effort to sand.Our main use was also on a veneer surface--you know that faux wood that goes over particle board on cheap furniture. It was something that couldn't be sanded. We used two coats and it looks fine, especially when you consider it is a two nightstand and one dresser set that we bought for $20.

ASIN	B000H5VKBQ
Amazon 売れ筋ランキング	DIY・工具・ガーデン - 1,077,328位 ( DIY・工具・ガーデンの売れ筋ランキングを見る ) 塗装用プライマー - 645位
GTIN (Global Trade Identification Number)	00047719020042
UPC	047719020042
おすすめ度	5つ星のうち4.6 3,556 レビュー
お客様の年齢層	大人用
カラー	ホワイト
カラーコード	White
サイズ	1 Quart
ブランド	Zinsser
ブランド名	Zinsser
メーカー名	Rust-Oleum
メーカー型番	2004
ユニット数	1.0 個
仕上げタイプ	フラット。
同梱商品	表面プライマー
品番・型番	2004
品目の容量	1 クオート
商品の用途	屋外
商品の重量	2.15 ポンド
商品タイプ	リキッド
商品体積	1 クオート
商品種別	ZINSSER 1クォート 02004 ホワイト、ブルズアイ 1-2-3 水性ステインブロックプライマー/シーラー
型番	Zinsser Bulls Eye 1-2-3
塗料の種類	水彩
完全治癒時間	1 時間
容器の種類	カン
屋内屋外での使用	インドア
干燥時間（時間）	1
推奨する地面のタイプ	コンクリート
特別な機能	防汚性
特徴	防汚性
耐水レベル	撥水剤
色	ホワイト
適用範囲	100平方フィート。
防水	True

Rustoleum rust-oleum 2004 Zinsser Bulls Eye 1 - 2 - 3ホワイト水性内部/外部下塗りシーラー、1-quart 1クォート 2004 1

Details

Details

Description

Specifications

Common Questions