OVERTURE (オーヴァチャー) PLA フィラメント 1.75mm PLA 3Dプリンターフィラメント 1kg 段ボールスプール (2.2ポンド) 寸法精度+/- 0.03mm ほとんどのFDMプリンターに対応 (ブラウン)

This filament is the brown I used for Grogu's robe; aside from being a nice color on its own, the shade goes very well with the filaments from Sunlu's Meta line (I used "apple green" and "pink" in this print). Overture at its normal price is a bit expensive for me, but on sale it was a great deal. It prints well on my Bambu Lab A1 Mini using Bambu Studio's "generic PLA" profile, though (at least when printing with a .4 mm nozzle at a .16 mm layer height) I had to increase "top Z" distance from .16 mm to .2 mm to make the supports easier to remove. For this print, I supported the robe under the collar and under the raised arm, but I couldn't find a way to support the cuff on the lowered arm in a way that let me remove the support without snapping off his middle finger; I was pleased to find this filament did quite a respectable job on the overhang even so (see pics). To be clear, I did support the fingertips, just not the cuff in front or behind them. I defintely didn't get a ruler, build surface, or opaque bag like some reviewers did; packaging must have changed sometime in the last five years. I really appreciate the thoroughness of the spool sticker in giving not only the recommended printing temperatures, but also the recommended print speed and empty spool weight. Some brands of filament don't list spool weight anywhere, meaning you have to eyeball whether there's enough filament left on a roll to finish a print. Ugh. I also like the fact that the spools are cardboard, since 3d printing creates enough waste already. (Yes, PLA is theoretically recyclable, but you can't recycle it at most municipal recycling facilities.) However, it's my understanding that cardboard doesn't necessarily play nice with certain printers in which the roll rests on a surface rather than being suspended from a bar through its middle; I can't speak to whether the "upgraded reinforced edges" Overture touts fix that issue.

I've been pleased with the quality of this brand of filament. My only gripe is that if the filament gets tangled up, it can screw up the AMS that I use, which is such a hassle. Other than that, I've had no issues with stringing or the quality.

Printed out some ornaments for Christmas. Good for bear colors - cough Bearista cough 😛

Perfect for what I needed

For some reason overture is always hot and miss... This one was a miss, color was spot on, had to tune a bit to get it to but never could get it to print consistently. If your wondering the TD on this color is a 2.0.. not sure I will get again, plus the cardboard spool are not AMS friendly..