Hitch tightener for 1.25" and 2" hitch, 2 packs

Quiet, Secure, and Rock-Solid — The Easiest Fix for Hitch Rattle The CZC AUTO Hitch Tightener is one of those small, inexpensive accessories that makes a huge difference. It completely eliminates the wobble, rattle, and clunking that happens with cargo carriers, bike racks, or hitch-mounted accessories. I installed mine in under five minutes using a ¾" socket wrench, and the difference was instant — no more shifting or metal-on-metal vibration, even over rough roads. The build quality is excellent for the price: a thick carbon steel U-bolt with a heavy powder-coated plate that feels solid and rust-resistant. It fits both 1.25" and 2" hitches, tightening snugly without scratching the receiver. Once torqued down, everything stays perfectly stable, even with a full load on a cargo tray or a two-bike rack. It’s also easy to reposition or remove when swapping between vehicles. The only minor caution is to watch clearance on low vehicles — if your hitch sits close to the ground, mount the clamp on top instead of below to avoid scraping. Bottom line: A cheap, heavy-duty fix for hitch noise and sway. Strong, simple, and works exactly as promised — the kind of upgrade you appreciate every time you drive.

Very well made robust easy to install well worth the money. Stops all movement at the hitch. Quotes the noise or bumping effect. Would recommend

It did exactly what I needed it to do. I had a 2-bike hitch mount that was loose and wobbly. Based on the reviews, I bought this one. Very sturdy and does the job of keeping the bike mount in place. Installing was a breeze, although you will need a wrench or socket wrench to tighten it down. I had no issues with the parts and as far as I can tell, there's no noise.

Feels solid, took more wiggle out of my bike mount. I would have given 5* but I wish it came with 2 jam nuts to help make sure it won’t loosen.

Good quality product. Worked very well. It impressed alot of people that have been having similar issues with the rattle. Just knowing it was there made me feel more secured too....I used this on a cargo carrier with about 400lbs in it on a suv at 80 mph at times no rattle and prevented any twisting of my racks arm from bumps on the road.

Very well made, thick steel, accurate threads on the U-bolt, quick delivery and great price!

I bought and used this with the intent of stabilizing a hitch tray and bike rack that I attach to my travel trailer, and in the few weeks that I've had and used it, I'm extremely impressed with how well it works. Unfortunately, though, I think I just learned about something I hadn't previously known: "thread galling" – I'm probably going to have to replace the included u-bolt and nut as a result. I'd attached this with my tray and used it for a 2 week long, 2500mi road trip and I was amazed at how stable the tray was. I then swapped the tray for my bicycle rack for the next trip and was, again, really impressed with how well the stabilizer worked; I have a fairly cheap bicycle rack and its fit is really loose and floppy without it. When I went to detach this and the rack late yesterday afternoon, I noticed that one nut was giving a lot of resistance after about the 5th or 6th turn. Since I've over worked plenty of mis-seated threads in my life, I decided to reverse the direction several turns to make sure the nut was tracking the threads correctly and then tried to loosen it again. It kept getting tougher and tougher, so I took a break. When I tried again, it had fully ceased and it won't budge. After researching, all indications are that it likely galled, or "cold welded". The first two installs and uninstall were so smooth, that I strongly doubt it mis-threaded; I performed the first three install/uninstall activities late in the evening, whereas I did yesterday's removal while it was 98 degrees out and the hitch had been baking in the sun most of the afternoon. I was using a socket wrench, so I don't think I galled it from tool speed, but rather, it was already probably so hot that when I loosened the first side and moved on to the next, the bolt temp probably increased to the point that the next nut welded. I'd still highly recommend this stabilizer, but wanted to share this experience so that someone else won't have to learn the lesson I just did.

Worked ss described

stopped the movement

Solide

Simpel maar doeltreffend. Gelijk een einde aan beweging van de trekhaak in de koker. Vooral bij gebruik van fietsendrager de ideale oplossing.

Super produit

package arrived damaged, most items missing