AV Access HDMI KVM USB延長器 CAT5e/CAT6/CAT6a/CAT7対応 最大80m LANケーブル延長

HDEX80-KVM: Games and videos look great with this extender, however, if the screen is busy with small font text, the text becomes noticeably fuzzy with compression artifacts. I'm picky so that's a deal breaker for me. I'm going to instead buy the unit that does uncompressed video. The 4KEX100-KVM video quality is uncompressed and appears perfect. I run a 2560x1440 display at 60Hz. I ran a 50M Cat7 cable. Works great.

Plug & play. Work well so far (4 weeks). Wireless mouse can be connected with the dongle.

These are actually great quality and worked well. Want to extend an HDMI monitor, mmouse and keyboard, this worked. Great packaging, solid and take a small footprint.

Use to run a 75ft Cat6 between front stage and control booth. My USB cam and USB Audio interface works together just fine, since this thing has two usb ports. All metal housing. Power supply has locking screw for added secure power connection.

Purchased the HDEX80-KVM. Was dead on arrival. USB worked correctly, however video through the HDMI did not. Tried both Cat5e and Cat6 cable, with no difference. Both test cables were less than 6' long. I noticed that the build quality seems cheap, and the components are very light and unsubstantial feeling. Incidentally, the module also seemed to run hot. this makes me concerned that even if it did work correctly, it may not last. Looks like i'll be looking elsewhere. ** Update 5/14/18** I spoke with a technician named Ryan, who contacted me hours after I sent an e-mail to tech support following the issues I had with the first module. He was extremely professional and quick to dispatch a second module which arrived a few days later. This one works! The USB seems to have little to no delay and the video at 1080P looks as good as though it were connected locally. I'm using cat6 cable at 50-ish feet with no problem. Also, the issue with the heat on the first module must have been due to the internal issue it had, as the working module does not have that issue. A couple of observations: 1) This will not pass a HDMI CEC signal. This is a niche requirement, and it was not stated to have it... My fault for net checking. 2) i would recommend applying the power to the Receiver module, as it seems to help with higher current draw USB devices. If you are using just a mouse and keyboard, then you should be fine connecting power on either end. Would recommend AV Access to anyone.