

Desertcart purchases this item on your behalf and handles shipping, customs, and support to Seychelles.
🖤 Bond like a pro, drive with confidence.
3M Auto Glass Urethane Windshield Adhesive (08693) is a professional-grade, medium-viscosity black urethane adhesive designed for permanent windshield bonding. Compatible with manual and powered caulking guns, it cures rapidly within 24 hours and delivers a tensile strength of 1200 psi. Water resistant and easy to apply, this adhesive meets the demanding needs of industrial auto glass repair and restoration.


| Asin | B000RW1XCK |
| Best Sellers Rank | #6,683 in Automotive (See Top 100 in Automotive) #16 in Body Repair & Restoration Adhesives |
| Brand Name | 3M |
| Color | Black |
| Compatible Material | Glass |
| Container Type | Cartridge |
| Customer Reviews | 4.5 4.5 out of 5 stars (5,157) 4.5 out of 5 stars |
| Full Cure Time | 24 hours |
| Global Trade Identification Number | 00051131086937 |
| Included Components | Other Vehicle Parts( AUTO_PART ), Performance Parts - Underhood, Engine Parts/Gaskets/Seals/Bearings |
| Item Form | Cartridge |
| Item Package Quantity | 1 |
| Item Type Name | 3M Auto Glass Urethane Windshield Adhesive |
| Item Weight | 14.56 ounces |
| Manufacturer | 3M |
| Material Type | Urethane |
| Model | 08693 |
| Number Of Pieces | 1 |
| Other Special Features Of The Product | Strong |
| Part Number | 08693 |
| Specific Uses For Product | Windshield Adhesive |
| Tensile Strength | 1200 psi |
| Unit Count | 10.5 Fluid Ounces |
| Upc | 051135086933 060829190559 051131086937 |
| Viscosity Level | Medium |
| Volume | 10.5 fluid ounces |
| Warranty Description | Manufacturer Warranty |
| Water Resistance Level | Water Resistant |
User
Excellent quality and easy enough to use for an amateur.
This worked great for installing a windshield on my minivan. You will also need a suitable primer applied to the glass before applying this urethane. It's VERY thick and sticky, and holds in place well once applied. I used about one and a half tubes to do a minivan front windshield.Be aware that it is VERY thick and viscous and it may be tiring to apply using a standard caulk gun. If I was using this stuff more than occasionally, I would invest in an electric or pneumatic caulk gun.
User
Inexpensive repair works well
Rear glass on 2002 tahoe hinge popped loose. Googled repairs and multiple sites recommended this adhesive. Removed rear glass cleaned area with alcohol after trimming old adhesive and roughing surfaces. Applied a generous amount of adhesive and pushed hinge into position. Clamped until the adhesive set enough so it wouldn't move after I removed the clamp maybe 10 minutes. Then Applied a sufficient amount of adhesive to the surface and feathered to help support the pressure from the piston. Be sure to drill out the old adhesive on the hinge to allow the adhesive to ooze through and create a good bond.
User
Great product
Worked as it should and sealed my windshield saving me $600. I used one tube on a 2013 escape. Wear gloves and pierce more than one hole in the top because it’s very thick. Dried in about an hour at 80 degrees or at least skinned over
User
Strong and Reliable Adhesive
The 3M Auto Glass Urethane Windshield Adhesive is a fantastic product! It’s easy to apply, and the medium viscosity is perfect for a smooth, even application. It cured quickly and provided a strong bond. I used it for my windshield replacement, and it’s holding up great—highly recommend!
User
Great seal
Repaired the rear window in my convertible after the factory glue failed and it fell out. Let me tell you...wear gloves folks. I thought it would be a quick bead of glue and on my way, but instead I had a fun fiasco of contortion trying to reach my window and squeeze this stuff out while stretch out across the trunk of my car and desperately trying to keep it from getting on my paint. I ended up with adhesive all over my hands and it took days to go away despite using various soaps including fast orange haha. This was not the fault of the product, it worked as intended, maybe it was a bit more viscous than I thought it would be as I cut the tip too small to easily allow it to be applied and had to squeeze the handle much harder than I figured they intended, causing lots of additional issues for myself.The adhesive itself is awesome. It went on fine, I gave it 48 hours to dry using suction cup clamps and some support from underneath. I have since taken it through a car wash and the seal seems to be holding fine. Top has been put down and up without any loss of adhesion. It's black colored so the parts I added a more than intended to do not show up unless under scrutiny. No complaints with it.Overall this product worked exactly as I expected it to and has held up so far. If anything changes I may update the review, but for now 5 stars!
User
Quality
The best windshield adhesive
User
Life-Saver for Windshield Repairs 🚗💪
This adhesive from 3M is an absolute game-changer for fixing windshields. I seriously can't believe how strong and fast-curing it is. It's like a superhero for my car! The medium viscosity makes it super easy to work with, and the high-strength formula ensures a reliable bond that lasts. I used it on a crack on my windshield, and it's like magic - good as new! 🌟 I love how quick it cures, saving me so much time. The 310 mL cartridge is just the right size, and the black color blends in seamlessly. I won't trust any other product after using this - highly recommend it to anyone needing to repair their windshield. It's a total game-changer! 🙌Stay safe on the road, friends!
User
Missing parts
Good sealant but did not come with a nozzle and was in a ripped bag. This made application incredibly difficult, the sealant itself is good, but missing parts is never a good thing.
User
good
nice
User
Excellent product
Excellent product ..better than expected
User
Works as described
I glued the rear glass window on my convertible. The window is holding even after opening and closing the roof a few times.
User
Buen producto
Al ser 3M es garantía. Lo aplique para pegar el marco de una ventana trasera corrediza de una Ford lobo y fue muy sencillo ya que el producto seca rápido y la adherencia es increíble, no he vuelto a tener problemas. Lo recomiendo ampliamente.
User
انتهاء صلاحية 3M اكثر من سنة
انتهاء صلاحية المنتج باكثر من سنه مما يعني انه غير صالح حسب المواصفات وربما يسبب عدم التصاقه بدخول الماء والهواء للسيارة او حوادث بالطريق
Trustpilot
2 weeks ago
2 weeks ago