FEMELI Record Weight Stabilizer, 11.3oz Vinyl Weight for Turntable (Silver) | Turntable Weight Clamps, Aluminum Vinyl Record Stabilizer, Reduces Vibration for LP Record Player, Fits Most Turntables

Well made, looks good, not too heavy so it doesn't put a lot of pressure on the bearings, and fits underneath the turntable cover. Audible difference? Haven't heard one so far...

Perfect! Works great and looks great! Reasonably priced, too!

I'll be the first to admit, I was a bit skeptical about the true usefulness of stabilizers, so I figured I'd try one of the less expensive varieties first. If you don't have older vinyl and are rocking primarily heavy weight 180g pressings, the Femeli Record Weight Stabilizer (or any stabilizer for that matter) shouldn't be necessary. However, if you have some older vinyl or lighter weight pressings, a stabilizer will make a significant difference in stability and sound quality. I've got a vintage JVC QL-Y5F table that has the electromagnetic servo tonearm that already accounts for warpage, but I'm still hearing a significant difference on my older/lighter weight vinyl in back to back testing with/without the stabilizer. I have the high profile (heavier) version of the stabilizer, and it seems to be the perfect size/weight combination, especially for those with high torque direct drive tables. If you're using a belt drive table, I would probably recommend going with the lower profile (lighter) stabilizer (or even a clamp vs a stabilizer), especially if you don't have pitch control to adjust speed. Even then, having this much additional weight at the spindle may cause premature belt wear. It is also worth mentioning that clearance could certainly be an issue for tables with low profile dust covers. My QL-Y5F is a big table to begin with and has plenty of clearance, even with the lid down. Overall, the Femeli has made me a believer in the usefulness of stabilizers, and the build quality is very good for the price. It's a perfect fit on the spindle, has a nice quality felt backing to protect your vinyl, and is perfectly balanced and wobble free. After using it for a few weeks, I see no reason to upgrade. It's a keeper!

Works as intended. However, with a 4mm slip mat this does not allow for the dust cover to close. Also noticed its machined juuuuuust slightly off center.

The FEMELI Record Weight Stabilizer is a must-have addition to any audiophile's setup. It seamlessly combines a touch of class with a robust and well-made design, all while enhancing the performance of your turntable. Here's why this record weight stabilizer deserves recognition: Pros: Classy Elegance: This stabilizer doesn't just do its job; it does it with style. Its classy appearance adds a touch of sophistication to your turntable setup, elevating the overall aesthetic of your vinyl-listening station. Heavy and Well-Made: The weight and build quality of this stabilizer are impressive. It feels substantial and durable, ensuring that it effectively does its job of stabilizing your vinyl records during playback. Performance Enhancement: Beyond its looks, this stabilizer significantly improves the performance of your turntable. It reduces vibrations, enhances tracking, and ultimately results in a cleaner and more precise audio experience. Rating: ⭐⭐⭐⭐⭐ In summary, the FEMELI Record Weight Stabilizer is a standout accessory for vinyl enthusiasts. It marries elegance with functionality, providing a heavy, well-made solution that significantly improves turntable performance. If you're looking to elevate your vinyl-listening experience and add a touch of class to your setup, this stabilizer is a wise investment. It's more than just an accessory; it's a statement of your commitment to high-quality audio and tasteful design. Don't hesitate to bring this heavyweight performer into your vinyl world.

Nice product. Still deciding how much difference it really makes. Price was right.

I recently was gifted my mom's old records and noticed that they all had warped a bit over the years. I purchased this product to help stabilize the old records and some of my new ones that were warped when they arrived. If you look at my first image (before putting the weight on), you can see that the record had some space between itself and the slip mat. The second image was taken immediately after putting the weight on and as you can see, the space is immediately gone! Pros: - Perfect weight, I could actually see the warped record stabilizing right after putting it on! - Fits under lid of my audio technica record player, so I can close the lid while it's on. - Sleek design doesn't stand out too much against the record, especially since Cons: - Only con I could think of would be that it covers the center art on the vinyl. This is a tiny grievance and isn't specific to this brand. I would much prefer my records to sound clear and remain undamaged over being able to see the center art while they're spinning. Target audience: Record collectors (and newbies/people with just a couple of records). Anyone who wants to protect their investment and be able to enjoy their vinyl music for years to come!

Sweet little tool that worked pretty well to get my warped Zapp II to play for me :) Do Wah Ditty! Will work on other records. Recommended.

I'm not going to trawl through a thesaurus to find adjectives that describe the 'improved' sound heard by the use of a record weight. Sonically, I struggle to hear any difference. But what this stabilizer does do well is flatten those slightly warped records that in turn greatly improve stylus tracking. I can at least see the improvement!

Se siente bien construido. Ajunta bien a mi tornamesa. Si ayuda a nivelar los discos con ondulaciones ligeras. Para mí, la mejora del sonido es mínima.

I was keen to receive this item and experience the benefits on the sound, but before I even used, found I was disappointed at the build quality in that the felt on the bottom was off center, would not expect this considering the price of this item

Great product, good value. Low profile. Fits under the lid of pro-ject debut carbon.

This is a nice and substantial weight, it's got a clean design and is machined well with no harsh edges or major defects, there's a little bit of indentation on the top like a harder material was sat on it but it's barely noticeable. Has a thick felt pad underneath and fits well under the dust cover of my turntable, happy with it.