🔩 Unlock Your Mechanic Potential!
The OTC 6290A Front Hub Puller is an essential tool for automotive professionals, designed to facilitate the removal of front hub assemblies with ease. It provides a mechanical advantage for servicing wheel bearings and brake rotors on a variety of 4WD vehicles, including popular models from GM, Dodge, and Ford, manufactured between 1988 and 2013. With its robust construction and compact design, this tool is a must-have for any serious mechanic.
| Manufacturer | OTC |
| Brand | OTC |
| Model | 6290A |
| Item Weight | 7.3 pounds |
| Product Dimensions | 10.8 x 5.4 x 2.7 inches |
| Country of Origin | USA |
| Item model number | 6290A |
| Is Discontinued By Manufacturer | No |
| Manufacturer Part Number | 6290A |
| OEM Part Number | 6290A |
G**.
Works good
Easy to use and worked great, I'm glad I purchase one.
J**G
This tool is "STOUT"!
I use this tool to push on a cv shaft on the front axle to get access to the wheel hub bolts on a 4X4 Chevrolet pickup, nothing else I had fit the Hub... This tool was overkill for the job but for the situation it was the only thing that worked .. At elevin LB very stout tool...
M**B
Get the jog done 2006 Dodge 4 X 4
I know there is a way to use an (mm) socket with a socket extension shaft and by using the truck power steering to the wedge-off (back and forth between hub bolts) the front bearing hub. Maybe so, but I didn't want to take a chance using the above method by myself with my rusted in-place front bearing hub. All I can say, the tool was worth the price. By using a (Big-Boy) Impact wrench diver and the help with a BFH the task was still was not a walk in the park. With the Puller shaft greased up, and driving the tool with the impact wrench, till basically was done turning the tool puller shaft it was time to use the BFH. Just keep hammering a bit (or a lot) and then again use the impact wrench that may turn about a 1/4 turn or less, applying more BFH Hammering. When the time comes for the front bearing hub to come off you will know with some excitement (boom) you will know the tool works. I hope this helps!
T**L
work great!!!!
needed this for my 208 chevy 2500hd!!!
C**O
Easy to use
Worked great for pulling the front hubs off my 07 Dodge Ram.
R**S
This tool saves time, lots of it
This tool is robust and works like it should. No regrets for this 1 at all
M**E
Does the job has performed excellent tool.
Excellent product. This puller pulled the hub off my 2003 Dodge ram four-wheel-drive front assembly easily. Are used a Milwaukee electric impact driver to do the job. Make sure you put grease on the thread so you don’t get gall the steel.
C**R
1998 Dodge 2500 CTD
Replaced and fought front unit bearings before on Dodge 2500, this tool made the job much easier and worth the purchase. Tip: before tearing down apply penetrating oil/spray (PB Blaster) to both assemblies for a week prior; also upon installation clean and coat the splines with anti-seize.
B**E
worked great on my 2007 dodge 4x4 it took about 30 ...
This is a must have tool For pulling front hubs.worked great on my 2007 dodge 4x4 it took about 30 seconds to get hubs off .make sure you have a impact strong enough to pull hub I tried a 1/2 inch impact first did not work then I tried my 3/4 impact pull hub off with no problems 30 seconds no sweat involved I would definitely recommend buying this hub puller to anyone you will not be disappointed Cheers.
N**K
.
Worked just as it should on my 2013 ram 3500
L**T
Five Stars
It is the best hub puller I ever used.
G**O
Five Stars
Great tool and awesome price too.
Trustpilot
2 weeks ago
1 week ago