200FT Shop Air Line Kit 3/4, Compressed Air Line kit

This air line astounds me with its quality and versatility. Since it's a 3/4" line, I don't need to worry about any flow restriction between my compressor (which has a 1/2" outlet) and my air tools (majority which are standard 1/4" NPT). Even my sand blaster will operate off of this circuit with no discernible pressure drop, which was a major problem when I was just dragging 1/4" line around to use with it. I think this kit comes with everything one needs to do a complete install, except of course for quick disconnects and rubber hookup line. That's fine, because there's at least three different types of disconnect and four sizes of air line to choose from, which makes including the correct size and type an exercise in futility. As it is, I'll need to purchase a few adapters to go from the T blocks to my quick disconnects, plus another rubber hookup line to go from my compressor air filter/drier to the input side of the circuit. No big deal, but keep in mind you'll need additional hardware and plan accordingly.

So far so good. No leaks. The only gripe is the mounting brackets are pretty weak and break easily.

I have been looking to run my compressor across my shop to some other future tools, but really only needed one outlet atm. I ended up deciding to get this set because it has everything I would need for now, and for future expansion. A nice touch was the caps they included in the set. I was able to get this all hooked up and ready for new lines to be added with almost no issues. My only really issue is that the screws / drywall holders they give you're a little on the cheap side and ended up rolling my own solution. Other than that, this was a really easy install. Even with all the capped lines, I have 0 leaks as of yet. Overall, this is my pick because it has everything you need, is plastic (longer durability), and comes in my favorite color!

This is a fantastic bit of kit to get started with a DIY compressed air system. Components are well constructed and thought out. About the only thing it doesn't have is a water trap/filter, otherwise it's all here - tubing, mounts, tees, fittings, etc. Initial testing shows a leak free and flexible solution. Nice bit of kit.

3/4 Inch x 200 FT Shop Air Line Kit, Compressed Air Piping System for Shop, Garage, HDPE Tubing and Aluminum Rapid Air System Includes Right Angle Fittings and Tee Fittings, Air Line Tubing Kit 200 FT is a lot of pipe! This will go in my garage and I am confident I will have some left over pipe. Comes with a ton of accessories. You definitely want to plan this out because you might need a couple more blocks and T's depending on how many drops you want to have.

This blue airline makes it so easy to run compressed air around the shop so I can have outlets where i need them It is super strong and sturdy yet able to bend around corners and over obstacles without crushing. This kit has tons of shutoffs and outlets included so I can do the whole shop with it and without a single air leak! Great item !

This is a great shop air line kit. 200 feet so long enough to set up a workshop. Hose has aluminum tubing so strong. Includes many accessories which are very nice. Even includes a cutting tool so a complete kit. Very happy with this air line kit.

Very good product very please

Ok, it just works! Took a little while to install myself, but its doable. Pressure tested- no leaks. I would buy again