LOVEHANDLE Universal Phone Grip - Hello Kitty & Friends

Update... the strap has stretched out comfortably now no longer makes my fingers feel like they're going to fall asleep and has given me the ability to hold it very easily without any discomfort at all. The material is certainly holding up and it is very secure on the back of my phone. The materials seem like they are of good quality, although the value is a little bit on the expensive side as far as I'm concerned. The strap is a little bit too tight, it actually makes my fingers go numb but I'm hoping that it stretches out a little bit. The color is what I wanted it to be and I like the design. But I do feel like it's safer than the metal ring popsocket kind of holder because I don't have a concern of breaking my finger with this one. So I guess I'm pretty satisfied

I've been using this phone holder for about 2 months now and have no issues. It's comfortable and wireless charging works great, so no complaints. I'm especially impressed that wireless charging works through the strap because I have a somewhat thick phone case (plastic shell + rubber). The strap is nice & thin in the sense that it doesn't add too much bulk, so I can still easily fit my phone in a tight purse.

I’ve purchased several of these over the last 4-5 years (one for each new case) and I can’t rave about them enough. Comfortable on the hand, keeps me from dropping my phone, strong, reliable adhesive. The only wear I’ve ever dealt with on the product itself is the elastic eventually getting stretched out, but it takes quite a while for that to happen. I love Love Handles and I’ll keep buying them as long as they make them!

It's true what they say. You don't appreciate the good things until you've been exposed to the bad. I got this because my phone case from 2021 was so slippery, you may as well slather butter all over the damn thing. It was hard plastic-like shell with geometric pattern that made the issue WORSE. I wasn't sure LoveHandle would even adhere properly, because the pattern made the back of the case both uneven and slippery. Well, adhere it did. LoveHandle outlasted the case, which broke on me a month ago. The elastic band of my LoveHandle had stretched a bit after nearly two years of usage, so I replaced LoveHandle with a metal ring-type holder, which also boasted 3M adhesive. Less a month later, the ring holder popped right off. It came with an extra adhesive, so I stuck it on and tried again. One week later, the ring holder popped right off AGAIN. I was lucky that both times were on my desk, so the phone only dropped about half a foot. Not ideal, but not enough to break my phone. But I was too nervous to entrust my phone to that thing again. I'm waiting for response from the ring holder company. But on a whim, I dug out my old LoveHandle and tried it with the extra adhesive included in the package. It turns out, even if both adhesives are 3M as advertised, what LoveHandle uses is a whole universe better than the ring holder company's choice. LoveHandle adhesive is almost like a gel or gum, and so sticky that prying it off was very difficult. The ring holder company adhesive is thinner and more foam-like, and it...pops right off. LoveHandle isn't perfect. Its design means the phone will not lie flat on any surface, and traditional phone stands don't work well with it. And the elastic band does stretch because, um, it's elastic. That's not a design flaw, but it does mean LoveHandle will have a set lifespan. I really did prefer the ring holder for its flat design and easier handling. But here's the issue: the PURPOSE of these holders is to hold your phone secure. Meaning, without coming off and dropping your phone unexpectedly. LoveHandle passes that test with flying colors. The metal ring holder...not so much. I think I'll keep using my old LoveHandle until the elastic gives out, then figure out what to do after. In the meantime, thank you, LoveHandle, for keeping my phone secure.

Arrived on time Price was fair enough I guess, since it’s just a small elastic on a piece of plastic with adhesive backing. However this piece stays on very very well. I like the grip control hold for my small hands and fingers. Only reason I ordered another is my cell phone case got old and yucky. Only issue with these is they can only be removed like using dental floss, amd your cell case might get affected. Once taken off then you’d have to try to re adhere to another case. Also the last one I had the elastic did fade and get rather stiff. It’s all the touching and use with dirt /grime from hands. Probably good habit to give the elastic a regular cleaning with a disinfectant wipe every so often keep bit more sanitary too !

Great product! Sticks well. Very comfy for holding phone and is nice and flat which is helpful when in car holder. Overall a great product and design is pretty, too.

Its well made and works as intended. However I find it to be very uncomfortable - maybe my fingers are just too big for it. I don't hate it, but I don't like it!

Got both the large and standard size because I have large hands and wasn't sure which would fit best. The large was too big, hand slid around, so I used the standard phone size. It was easy to install and adhered well on my textured Spigen case. Even with my large hand and smaller handle, my fingers slid up and down some, but overall it felt secure and did make it easier to hold my Pixel 8Pro. To that end, it worked great. It also seems well made and sturdy. But... the handle is very thick. As a result, wireless charging on the Pixel Stand would not work. After many attempts, I'd would get it situated on the charger so that it would at least be charging in slow mode (fast charge was an absolute no-go), only to wake up to find out the phone wasn't charged because it slide off the charger. The other problem is that you can't lay the phone down flat. It wobbles significantly. Makes it impossible to use the phone when it's laying flat because it rocks back and forth. The added depth also makes it difficult to use a car mount -- the phone didn't fit completely in the bracket and the handle on the back prevents the phone from sitting back flat in the mount, it's off kilter. I was afraid the phone would fall out if I hit a pothole. I ended up removing the handle. It was relatively easy to remove. Did have to scrape some of the adhesive off, but it did come off and didn't damage the case. But that is another potential issue. If you switch between cases, you'll need a handle for each one. You can't switch the handle back and forth without completely removing and re-adhering each time and that will require new adhesive, it's not reusable. If wireless charging isn't important to you, you don't need to use your phone while laying flat or in a mount, and don't switch cases, this handle is a good choice. If these features are important, you'll need to look elsewhere. I ended up with a ribbon type handle that is thin and does have the same re-usability concern, but doesn't have the depth or wobble problems.