artscape Magnolia Window Film 24" x 36"

Good quality and looks exactly like the pictures. Blends in perfectly with the door. Easy to install. You cannot see through it and light is filtered.

We have the very narrow and very old door from our mudroom to our pantry in our old Victorian farmhouse. Unfortunately the glass is glazed a bit unevenly where the wood of the door has been abused over the years, so its not a perfectly straight line there. That made fitting the vinyl a bit trickier along the bottom, but I just put the rest in place and then dress an ultrafine point sharpie across the film to mark and score the where the glaze was. It worked pretty well. A basic plastic bread bowl scraper worked to remove the bubbles. It does allow a decent amount of light in, though this pattern is a bit darker than most. More than anything I needed to block the view of a certain 5 month old German Shepherd puppy who likes to jump up and peer thru the glass when we go into the mudroom for her kibble. As she gets bigger, I guarantee she will punch thru that glass if we don't block her view. She already tore down several iterations of curtains, so here's hoping this works. 🤞 The decal definitely adds privacy to the door, maybe too much. I can't decide. The only one's looking thru that particular glass are our chickens from the coop, and I rather liked being able to glance out and see if there were predators out there. So we really only needed to block the bottom half. In other words, this might be too much privacy for me, but its easy enough to remove when puppy training is done. In the meantime, its quite beautiful, not cheap looking at all, and easy to apply and remove, so I have no complaints. My only other concern is whether it will stay put when the weather turns cold. The mudroom is unheated, so it freezes each winter. Will the film stay put with one side warm and one cold? Stay tuned for that answer. 😉

This is one of the best products on Amazon! I am so pleased with this light blocking privacy film. I only had one window I wanted to cover. Other films that I looked at were yards long and that would’ve been a waste for just one window. So I took a chance and bought this film and I’m so glad I did. First of all, it’s the perfect size. It was easy to cut and size for my window and it applied very easily. I just used a credit card to smooth out any air bubbles once it was up. It looked amazing. I’ve included before and after photos to show what a huge difference it made. You will not regret this purchase!

Firstly, this is gorgeous and I love it! Secondly, the thickness is perfect, and it's a super simple installation with perfect stickiness (it's not actually sticky at all; it CLINGS to the window when you wet the window properly). Thirdly, this is 100% private (love this because my dogs can't see outside and cannot see the houses/dogs across the street! Sun protection is great, and when the sun is shining, the panels allow plenty of light through. So based on these things, I would recommend this product. If you have windows you want to cover that are LESS THAN 36" in HEIGHT, this is perfect for you. *****MEASURE your project according to HEIGHT so that you purchase enough***** *******I wish these were available in LONGER lengths like the ones you can find from other companies********

Recently put up in our small windows for a bit of privacy. Turns out it’s been great for cooling down the room too! (Big bonus in a high desert). Super easy application. Even without measuring it super precisely I think they still add a bit of personality and privacy!

Looks great! Allows light in while providing privacy. Thick durable material. Does not stick well on window exterior but sticks OK on interior. Recommend using glue if affixing to exterior glass. Easy to cut. Minimal edge curl.

First off, this stuff is a quality product. It is much thicker than I expected and does not feel like some cheap cellophane style ones that are out there. Installation is pretty easy as long as you follow a couple of key steps. Many of these have been said already, but after installing five of these. I feel the need to include my two cents. 1: Get yourself a spray bottle and fill it with water and several drops of liquid dishwashing soap. 2: I found the small squeegee that comes with the kit to actually work really well. I had a larger one, but smaller is better in this scenario as it is easier to get the bubbles out. 3: I would HIGHLY recommend making a template of the window with some Rosin / Butcher paper before cutting the film. Cut the paper out to a perfect fit, then transfer the template to the actual film. If you cut the film 1/8” larger than the opening, it is next to IMPOSSIBLE to cut the film while it is on the window. I know this sounds absurd, and I did not believe anyone else who said this, but it is. I have a precision set of Exacto knives that will slice anything with the slightest touch (basically they are scalpels). For some reason once the film gets wet, and you try and cut any excess that is sitting on the edge of the frame or weather stripping, it pulls the film away from the glass. I have a mild case of OCD, so I spent over one hour trying to prove that I could cut it. Well I cut it, as in my finger, and the film, but of course not where I intended to. So after all that, make a template, cut it exact ahead of time, or slightly smaller than the glass. You really can’t tell if the film is 1/8” smaller than the opening, so don’t stress out if you are slightly off. 4: So now that you have the film cut, spray the window with a bunch of water / soap, peel the paper back and coat the inside of the film. Place it into position, and spray the heck out of the film, BEFORE using the squeegee. Start in the middle and work out all the bubbles and water from inside. Keep the film coated with water so the squeegee slides easily. As you get close to the edge, you will see the last drops of water coming out. If the film is slightly larger than the glass, then the water will be trapped inside and will not fully stick to the glass. If this happens, slightly pull up on the film as you squeegee to help the water come out. The final result looks like real stained glass, and all and all, a fairly easy process. Cheers!

Pleased with this. Easy to install. It blocks some of the light, which is exactly what I wanted. This was for a west facing bedroom that gets very hot in the summer. As far as privacy, it provides that even at night (where a lot of other types do not) . I’ll probably switch this out for something lighter in the winter months, but for now it is perfect.

Vraiment très joli. Facile à poser, adhère bien. En plus livré avec la petite raclette. Tout est parfait

Looks like real stain glass. Love the bamboo design. It is quite modern which we wanted as we have just built the house. We had a view on one window which we didn’t like and while we wait for screening trees to go tall enough this window film is the perfect solution. It allows in the light and gives a beautiful interesting feature to the first floor hall landing. Our window is huge so I had to link several pieces. They line up easily and if I can do it, anyone can! This design was slightly more expensive than others by artscape but is much more in keeping with our property and think it’s worth it.

Il disegno è proprio molto bello. Io ho rivestito un plexiglass e non un vetro. Devo dire che non è proprio felice di starci attaccato. Il vetro sarebbe stato perfetto mentre sul plexiglass ogni tanto bisogna schiacciare gli angoli.

It’s priced more than the other brand I ordered for another project. The other product was so tightly wound and thinner material when I cut pieces to size, the material had a curling I have yet to remove. Making it Impossible to use. This product went on super easy with zero problems. Took minutes. Best quality and absolutely beautiful! Will definitely buy again. Made in America and you can tell by the quality and functionality.

The product is a nice thick quality film. It's simply applied, by mixing some dishwashing detergent with water, in a plant sprayer, then giving the glass a good soaking (light spaying will not do the job). IMPORTANT: Take care to cut the film to the correct size and ensure you cut it on a SOLID surface, otherwise cutting could be difficult. Ensure you squeegee out, all the water and any bubbles, after positioning the film, using the supplied tool. I fitted some Dimmable LED strips to my cabinet, to back-illuminate the film, if you look at the pictures, you can see how effective that is. Just don't rush the installation and you'll be very happy with the results.