BTG LED Light Strips Kits for Wltoys V929 V949 V959 V969 V979 V989 V999 Quadcopter-pack of 4

I purchased these for my SYMA to replace those cheesy Orange and Green LED, and they are Awesome. The Flashing set functions and the Red are really bright Red, did not; but i'm using these on a 3.7v SYMA X5SW spliced into the original LED wiring. and they work great, I clipped off the 4th LED in light bar as to fit the syma, and ran four 750 mAh batts. through the new configuration (over a half hour), and NO short circuit, they act as original equipment. The beauty is these are easily seen from quite a distance at night making it easy to navigate, awesome upgrade.

I received my Led Light Strip and they work great! They fit on the carbon arms of my WL Toys V959 perfectly! They also came in a nicely sealed package and they have male connectors to plug directly onto the PCB! I recommend these for anyone who like flying their quadcopters in low light or at dark! I rated them 4 stars because when I was installing them, one of the soldered wires was lightly soldered and came apart, but I was able to re solder it and it worked great! I own a WL Toys V949 that comes with Led Light Strips and they are identical to these!

These are a very cool addition to your V95. I initially plug them into the light ports on the top of the controller (note that there are extra connectors on the control board of the v959 for these LEDs). This is necessary to do to determine what lights are to be installed where. There is no indication on the light bars themselves as to their colors. After determining which LEDs were which I installed them with hot glue on the bottom of each quad arm. I have not seen an appreciable power drain with these LEDs.

Made a huge difference in lighting. Much brighter and easier to see during sunset and night flights. Doesn't drain too much from the battery. Easy to plug in and already has a designated receptacle. I did have to clip mine shorter so they would fit but that's no big deal. I used a few fans of super glue to attach them to the frame. It took me all of 10 mins max to install. Very good product. Highly recommend.

make sure you use a resistor or it will pop especially the red ones. the multi color can take more power.

Worked well on my v959 quadcopter and added additional orientation help while flying

these are great illumination for my quad.a set of solid red leds, and a set of progressive multi color flashing.3.15 mm wide , 50.55mm long 4 leds each strip 3.35 dia.60 mm wire lead with mini jst female plug end.Nice and bright