The Kühler H2O K-series, our newest generation of all-in-one closed loop liquid CPU coolers, is uniquely engineered to protect your CPU’s performance, increase the life of your CPU and ensure that you can count on its performance for years to come. All Kühler models are built around a new sealed and silent pump, which consists of a three-phase motor promoting a rapid liquid circulation, helping the CPU to keep cool while it is being pushed to its limits. The pump features a high coolant pressure & lower-fan noise. The Kühler is easily set up via plugging into a 3-Pin motherboard connector and SATA power (through an included adapter cable). The pump-block also features three LEDs, which indicate coolant temperature. Blue indicates <48°C, green indicates 49-60°C, and red indicates >60°C. If you want efficiency, high performance and great build quality to meet the demands of your gaming system, look no further than the Kühler series coolers.Features: Powerful pump delivers a water pressure of 2.3 meters high Ultra-efficient, PWM Radiator Fans with blue LED.
D**.
Good cooler
Thank you seller for your good packaging and timely delivery. The seller sent me their Whatsapp number also. Install the cooler recently on a rog shaving 7700k processor and it works well.I use the system for quantum mechanical calculations that need lot of resources . Even when all the cores works 100% and the 64GB RAM at 100% and running continuously for 4 days+night my system's temperature never crossed 80 degree.
V**
For that gaming look
Good: great cooling performance. Keeps my and cpu at 40c at full load in a 35c ambient temp. Overclocking the cpu took me till 51c but is very quick to bring he temps down once load is removed with stock thermal paste. Fans accent lighting is good and they have rubber seals to create a close the gap between themselves and the radiator. Works well in pull, push is very noisy.Bad: the pump is in the radiator housing so I had an issue in my top mounted setup as this extra space was not available in my case.
V**K
Worth the money
1. Great build quality2. In this price range, you can't get better product than this.
N**I
Best cheap 240mm cooler u can buy
Best cheap 240mm cooler u can buy ... installed on my ryzen 5 2600x idle temp 35 37... in load or gaming never reach 60
M**D
Better to Return it...
Instead of bringing down the cpu temp.... It went high as much as 90° & above
A**R
waiting for delivery
i m waiting for the product....the configuration of redmi note 7better than m20.
M**O
Best AIO under 5.5k
At this price range this cooler is simply a no-brainer due to the fact that it's a 240mm AIO.I'm using this with an overclocked Ryzen 5 2600 @3.9GHZ and CM MasterGel Lite.The temps are quite low and stable, peaking at 55°c on a bad day. (Only under heavy load.) While the lowest temps are around 28-32°.One thing to note is that the fans are quite silent even at higher fan speeds when the cpu is under load. The fans have a blue LED light which cannot be turned off through any software, but on the bright side you can simply get 2x 120mm fans be it RGB or simple plain fans to replace the ones that come with this cooler.It's definitely a bang for your buck.
T**J
Good though bad
There is no way to buy it at this price(6500rs) its value earlier was 4200,3900 in sale but last few days its sale was good and 2,3 youtuber made a review on it and all the people both consumer,reviewers said its +ve point was its price to performance amd you sellers ruined the same so as its will harm both sales and product value
L**R
) works wonderful and the temps dropped dramatically
Was a bitch to install, (probably my fault but ah well..) works wonderful and the temps dropped dramatically, the leds on the fans are really well lit
J**K
Cracked fan.
One of the fans were cracked, but this didn't matter as I was going to use other fans instead.
J**T
Start mit Hindernissen
Eines vorweg: Das Teil hat mich einige Nerven gekostet!Warum dann trotzdem eine relativ gute Bewertung? Weil es prinzipiell das tut, was es soll: Kühlen!Aber von Anfang an:Die WaKü kam pünktlich an und der Karton und sein Inhalt machten schon mal einen guten Eindruck. Am nächsten Tag habe ich mir dann auf dem Youtube-Profil von Antec ein kleines Filmchen zum Zusammenbauen und Einbauen angesehen und war schon mal etwas schlauer. Anschließend habe ich mir die beiliegende Anleitung etwas genauer angesehen: Englisch und Chinesisch. Naja, nicht optimal, aber wird schon gehen.Die Bauteile (Schrauben etc.) sind in einzelne Tütchen verpackt und beschriftet. So nett das auch gemeint ist: Die Bauteile wurden in der Anleitung mit Buchstaben gekennzeichnet und auf den Tütchen mit dem Namen. Ich habe also trotzdem die Zeichnungen mit den Schrauben verglichen um zu wissen, ob ich das richtige Teil in der Hand halte.Nach dem die Halterungen an der Pumpe befestigt waren, die Backplate vorbereitet war und die Lüfter an den Radiator geschraubt waren (alles sehr gut beschrieben und auch für mich als Frau verständlich), sollte der Einbau folgen. Alter Boxed-Kühler raus, alte Wärmeleitpaste runter und den Radiator schon mal grob positionieren. Erster Nervenzusammenbruch: Das Teil passt nicht ins Gehäuse! Mein Fehler, dafür gibt es keinen Stern Abzug. Also neues Gehäuse bestellt und wieder warten.Nach dem die gesamte Hardware ins neue Gehäuse umgezogen war, begann das Spiel von vorne. Der Einbau funktionierte dieses Mal problemlos und das Anschließen ist auch kein Hexenwerk. Beim ersten Start die Ernüchterung: Die Pumpe läuft, die Lüfter für den Radiator nicht. Nachdem wir per Ausschlussverfahren das defekte Teil identifiziert hatten, kam die Ernüchterung: Das Splitter-Kabel, dass die beiden Lüfter zusammenführt und auf einen FAN-Anschluss reduziert, ist defekt. (Ganz nebenbei war auch noch ein Lüfter des neuen Gehäuses defekt).--->>> Für diesen Auslieferungsfehler ziehe ich einen Stern ab!Ich habe zum Hersteller bisher keinen Kontakt aufgenommen, da ich den Rechner geschäftlich nutze und keine Zeit hatte auf Reaktion und Ersatz zu warten.FAZIT:Nach dem wir jetzt ein neues Splitter-Kabel besorgt haben, läuft die WaKü einwandfrei. Im Durchschnitt bewege ich mich bei 25° Grad, der aktuelle Maximalwert liegt etwa bei 45° Grad. Kein Vergleich zu den 75-80° Grad, die mein alter Boxer-Kühler verursacht hat! Die schriftliche Anleitung ist verständlich und ergänzt durch das Youtube-Video sollte ein Einbau für jeden Laien möglich sein. Englischkenntnisse vorausgesetzt.Gutes Modell, dass sich mit anderen Markenmodellen messen kann. Ich hatte leider das Pech, ein Montagsmodell zu erwischen, bei dem ein Kabel defekt war.
A**E
Vorläufig gemischte Gefühle
Beim Auspacken fiel auf, dass der innere Karton völlig verrissen und kaputt war, zudem war alles etwas mit Schmutz überzogen. An sich hab ich damit kein Problem, solange alles nachher läuft.Allerdings sind auch bei den Lamellen ein paar verbogen. Ich kann die kühlung aktuell noch nicht testen. Ich hoffe daher, dass alles dicht ist. Innerhalb der Rückgabefrist werde ich es leider nicht schaffen und bleibe dann auf den Kosten ggf sitzen.Sollte etwas nicht dicht sein, korrigiere ich die Rezension auf 1 Stern nach und reklamiere. Sollte alles jedoch dicht halten und die kühlung funktionieren, Werte ich noch auf 4 Sterne auf.5 wird es leider aufgrund des doch nicht einwandfreien Artikels nicht geben. Jedoch sehe ich als Verbraucher darüber hinweg, solange alles tut was es soll.
Z**N
Prodotto fantastico, un Po di pratica nel montaggio
Dissipatore fantastico, temperature basse e ventole silenziose con un bellissimo blu. La luce sulla waterblock invece varia in base alla temperatura (verde-blu-rosso)Unica cosa, montaggio e istruzioni non proprio semplici per un neofita. Per il resto consigliatissimo,ottimo rapporto prezzo/prestazioni
Trustpilot
1 week ago
2 days ago