DuctlessAire Outdoor Wall Bracket - Mini Split Mounting Bracket - Ductless Ai...

This mini split mounting bracket is sturdy and well-made. Installation was straightforward, and it holds the unit securely without any wobbling. The metal feels durable and weather-resistant, giving confidence that it will last. Overall, a reliable bracket that does its job and makes mounting a mini split much easier.

Instructions say the top horizontal arm holds no weight and weight must be placed on the fasteners of the 2 vertical arms. So Its nice to hit 2 studs. Unfortunately I did not, and hit 1 stud..Then Drilled a 1/2 inch hole into the stud. Trying to install a toggle bolt...Luckily, after careful deliberation I filled the 1/2 inch hole with exterior wood glue and a piece of half inch dowel, and was able to capture, at least, 1 vertical arm with the included lag bolt fasteners on a stud. The other arm got the toggle bolts. Unfortunately I could not locate a stud for 1 vertical arm. After doing some heavy engineering maths on 3 or 4 different types of fasteners I used, I came up with the number of how much weight this could hold, based on the fasteners, and it was well over 4x the 60 lbs. I weighed my condenser at. Using the engineering maths weights I felt comfortable doing a few dips off of the mounting bracket to check my work. I do believe the top horizontal arm does add some structural support and the manual is saying dont depend on it, just forget the top arm exists when making your engineering weight calculations with fasteners and what youre mounting into. Now that the mount is mounted with fasteners. The quality of the mount is there. Its fully capable of securing the 55 lbs of load. The rubber feet dampeners do help with noise reduction and I consider what is included robust for the quality of the dampener. Most importantly is the arms length. Its a little longer and gets my unit farther away from a flush mount with the wall. This is important to increase the efficiency of the unit as it tries to draw in air from behind it. You want these long arms to give more room behind the unit.

Wonderful and easy to install! Comes with all hardware and even some super nice easy to install rubber feet. Don’t look anywhere else, this is the best!

Feel strong, easy to assemble and install

This is the actual wall mount I used for my mini-split outdoor unit. Overall, it’s solid and does the job, but it loses a star because it does not have standard 16" on-center mounting points, which is a real consideration for wood-frame construction. To install it properly and ensure it could handle the shear load, I had to add horizontal 2×6 blocking tied into the studs. Once mounted that way, the bracket felt secure and stable with no flex. The bracket itself is well-built and works fine for the supported BTU range, but installers should be aware that extra framing may be required if you’re mounting on a typical stud wall. If you plan for that ahead of time, it’s a good product—but it’s not a simple bolt-to-stud solution out of the box.

Worked well and seems to be made heavy enough.

Quality built product with all the parts for hanging mini split!

Easy to mount and keeps the mini split off the ground and away from the wildlife.

Most the stuff dose not fit well together , expensive for no point,be aware

parfait

Great!

Parfait pour le thermopompe qu'on a posé

Good unit although the lag bolts seem a bit large for the plastic anchors which are themselves rather large.