3D Print Tool Kit - 38 Essential 3D Print Accessories for Finishing, Cleaning, & Printing - Removal Tool Included - 3D Print Tool Set

This 3D print tool kit contains almost everything you need to start 3d printing or even if you have been printing for a while. The Items themselves feel very good quality. The wire cutters and needle nose pliers can be very useful for removing supports from prints or even printer maintenance. Other things included such as the file, deburring tool, tweezers, and the knife kit are very useful for cleaning up your prints. The kit also contains other printer maintenance tools, such as metal brushes and needles for cleaning your nozzle. The digital calipers, while not the most accurate, only going to the tenths place in mm (.0) and the hundredths place in inches (.00), work reasonably well for the price and until you can get an upgrade.I find that the print removal spatula is very flimsy, and I don't use it very often. Besides that, the rest of the kit for me has been a great addition to my 3d printing experience, and it even comes with a zipper pouch to keep all the tools in, which is a nice touch. Would Recommend.

This is a great kit to make your 3D printing life much easier. All the tools are decent quality, so much better than anything that might come with your 3D printer. Buying this tool kit is a great way to get all the handy stuff you need or didn't know you needed without having to try to source everything yourself. The only thing that could improve is the calipers. They are plastic and like to turn on by them selves. If they were just a bit tighter, they would be perfectly use able for roughing in your 3D printing design. At this price, I am surprised they could afford to put a set in there at all. For the money, the kit is completely worth it, buy one, buy one for a friend, buy one for your local maker space, buy one for a Christmas present.

This is a good kit overall. Lots of useful tools and some great wire brushes.It would have been better to drop the price slightly and remove the poor quality measuring caliper which is basically junk and fell apart quickly. Don't let this be your only measuring tool... Invest in a decent quality digital caliper - it will be with your for life...

Not sure why Amazon is recommending I rate how warm, sheer, and thick this kit is, but it’s great. The calipers are actually decent, but they’re the same ones you can buy for like a few dollars on eBay. You can’t expect that much out of your cheap calipers from a kit that costs less than 50% of a single set of Mitutoyo calipers, but all in all they’re more than adequate for most tasks you’d use them for. This scraper/spatula is the best one I’ve used, it has a very this edge which is perfect for getting under your prints and peeling them off. Needless to say, CHEP knows what he’s doing and I’d definitely recommend this a great all in one 3D printer beginner kit. Go check out his YouTube channel as well if you haven’t already.

This kit really has a lot of essential tools for a fledgling maker in the 3D printing space. Within a day of receiving my kit, I had a nozzle clog. I actually didn't have any needles to attempt a hot clear of the aperture, so the inclusion of a set of them was very helpful. All of the tools have a place in this kit and are staples, from the glue stick and cutters for printing prep, to the blade and deburring tools for finish work, and everything in between.If I has any complaints, it would be that the needle-nose pliers included in the set only open about 8mm. This is fine for grasping filament or small/narrow parts, but doesn't work for larger pieces. I have a set that came with my Prusa i3 Mk2, so this wasn't a problem for me.Overall, still a great kit that I will constantly be putting to good use!

The kit contains everything you need to make 3D printing easier. The only issue is the digital caliper is very loose and the battery was already corroded and made the unit non-working, even with a new battery. Otherwise it would merit 5 stars based on the items included and the low price.Chris from the company contacted me, apologized for the issue, and sent a replacement immediately. This level of customer service is so refreshing. Hence the change in rating to 5 stars.

I got my Filament Friday 3D Printer Toolkit yesterday and couldn't wait to open it up. Its is sturdily packaged in a nice cardboard box and the tools were easily accessed when opened. The Zippered tool bag was very nice and will hold all the tools except maybe the Digital Calipers due to their length. All the tools look to be good quality but the only one I used so far is the spatula for removing a print from my printer. There is a card that has descriptions and illustrations of the tools. Unfortunately the illustration for the wire cutters doesn't match well with the cutters in the kit (The cutter in the kit is a nicer version of the one that came with my Ender 3) and the illustration for the Cleanup Knife doesn't show it as a blade set. Those complaints are minor because as a whole, the assortment is a good buy. I'm actually going to use the cutting board that comes in the kit as a pad to rest my glass print surface when removing parts. I recommend this setup for those just getting started.